• europages
  • >
  • COMPANIES - SUPPLIERS - SERVICE PROVIDERS
  • >
  • heat treatment equipment

Results for

Heat treatment equipment - Import export

South Korea

Verified by Europages

The effect of carbon film + far infrared ray + near infrared ray + illite ceramics! Far-infrared rays remove impurities and dead skin cells from the skin surface, and near-infrared rays penetrate to the dermis and burn fat. By attaching a rare mineral Illite, the effect of far-infrared rays is more than doubled. 1. Made of airplane wing material, it is lightweight. 2. It is safe from fire by using carbon fiber. 3. A rare mineral ilite, produced only in Yeongdong-gun, Chungbuk, is attached. 4. Once purchased, it can be used semi-permanently. · Size : (width) 58cm / (length) 68cm / (height) 33cm · Rated Voltage : 220V 60Hz · Power Consumption: 440W · Material : external finishing(leather), reflection film, thermostat finishing, metal structure, radiant heat(pyrogen) film, carbon coating fiber, ceramic + silicone adhesive

Request for a quote

Germany

The advanced EndoFlex™ endothermic gas generator combines the patented EndoInjector™ fuel injection generator control system with the high-efficiency ReactionCore™ technology to lower operation and maintenance costs associated with producing high quality endothermic gas for your heat treatment furnaces. The generator is equipped with the latest sensors to monitor dew point, unreacted methane, and energy consumption. The touchscreen interface provides easy access to review generator operations, and the integrated paperless chart recorder tracks generator performance to meet production auditing requirements. ReactionCore™ technology is a proprietary generator design that replaces a single large retort with several smaller centrifugally-cast retorts to significantly increase the surface area, improve the heating efficiency of the reaction chamber, and reduce the heating energy required for the production of endothermic gas. In addition, the smaller retort design significantly...

Request for a quote

Germany

The KCT, KET, KVT and KIT model vacuum dryers with additional equipment for heat treatment in compliance with IPPC All vacuum dryers from Kronseder can be additionally equipped to perform heat treatment in compliance with IPPC. Up to 6 sensors are available for heat treatment, whose measured values are stored for a protocol by the visualization of the Kronseder MK 200 control.

Request for a quote

Spain

Business lines Efficiency, profitability, circular economy, automation and safety: we provide integrated solutions for smelting, aluminium recycling and heat treatment plants. We understand the digitisation of plants as a living development that generates value and competitiveness in companies. We intervene at a global level from the engineering phase to the management and integral maintenance of the facilities. Services and Solutions Service is one of the values of our origin, it is part of our DNA. Our solutions and services cover all phases of the life of a smelting, aluminum recycling or heat treatment plant: engineering, equipment, automation, revamping... We carry out projects on an international scale.

Request for a quote

Switzerland

Verified by Europages

The 100 Cr6 steel rings manufactured by WIB are stabilized after hardening by annealing. As a result of this treatment, they can be used at temperatures of up to 150°C. They have a hardness of 60 to 64 HRC For applications operating at high temperatures or in order to reduce their sensitivity to shock loads, it is necessary to stabilize the rings at higher temperatures after hardening. It should be noted that such a stabilization will slightly reduce the hardness of the rings.

Request for a quote

France

Verified by Europages

Tissue drying Lamination Ironing Heat treatment rollers

Request for a quote

Germany

Verified by Europages

Using the DEBUGGER method (heat treatment) from FrigorTec, the DEBUGGER DB18 has proven its effectiveness in killing insects, larva, and eggs, for decades. This method increases the air temperature to a range between 45°C and 60°C, and keeps it there, so that pests die off without using chemical substances, thus preventing damage to buildings and their fittings. A power distributor is required depending on the size of the installation site or the number of devices, and we recommend using one or more SCRAMBLER SC 6000s to save energy. Fields of application > Specially developed for large spaces, e.g., mills, bakeries, the food-processing industry > Often used in spice and coffee processing, as well as in the tobacco industry, muesli manufacture, and small animal feed production > Combine several DEBUGGER DB18s in very large rooms and halls

Request for a quote

Germany

Verified by Europages

Infrared Heaters - Highly efficient infrared-technology. Economical heating, exactly on point, with Schultze Infrared-heaters. Specially designed halogen heating elements emit short-wave infrared and provide instantly noticeable comfort heat, similar to the sun. Heating people directly without the need to build up and maintain a body of warm air is economical and flexible as well, especially for applications like outdoors, with high ceilings or huge spaces. The field of application includes for example work-shops, sport-facilities, pub gardens, patios, but also industrial or commercial appliances like drying paint or heating machinery. The HA-series are IP22 rated for indoor use and provide the most economic means of heating intermittently used buildings. The case includes M6 holes for optional suspension.

Request for a quote

Austria

Verified by Europages

New device for pool water desinfection with magnesium, the salt electrolysis unit ADVANCED-PRO MAGNESIUM combines the natural properties of magnesium salt with the benefits of an electrolysis, It disinfects the pool water and provides a relaxing bath, softens skin and hair, without unpleasant chlorine odors. Magnesium ions penetrate the skin and provide therapeutic benefits for muscles and tendons as well as for the immune systemwith IP65 housing, with digital display, low energy consumption

Request for a quote

Slovenia

Verified by Europages

At our company, we offer comprehensive heat treatment services for both steel and aluminum products. Our team consists of expert associates who are leaders in their respective fields, ensuring top-notch quality and precision in every project. Additionally, we provide valuable consultation to help you determine the best available options or optimize processes to achieve your desired results efficiently.

Request for a quote

Italy

Verified by Europages

M.E.G.A.’s forging and heattreatment division is capable of forging fittings (in a closed die) up to 4” 16 kg. The heat treatment furnaces and tanks are all certified to Norsok M650 and ASTM A991 standards and can treat any product that M.E.G.A. produces (large and small forgings, pipes and any other type of part).

Request for a quote

North Macedonia

These products will not corrode from the inside and outside too. There are no pieces of rust that may damage the inner membrane. The outside moisture and chemically active environment may not damage it too. That’s why these are long lifetime vessels compared to conventional steel vessels.

Request for a quote

United Kingdom

ISPM15 is an international standard for phytosanitary measures which is being progressively implemented throughout the world. Already some 28 countries have adopted the standard; a further 21 are in the progress of doing so and about another hundred countries have signalled their intension to bring the requirement to their national regulations. Countries which have signed up to ispm-15 are entitled to refuse entry at their frontiers to goods on wooden pallets, crates, spools or any other wood packaging unless it has been treated, marked and certified in accordance with their regulations. Associated Pallets Ltd has been providing a heat treatment which meets the demands of ISPM-15 and since the introduction of the plant some four years ago, has become experienced in all needs of the wood packaging producer and user.

Request for a quote

Ukraine

Dimensions up to 600x600x900 mm, weight up to 800 kg. LPC (vacuum cementation) option. Hardening, heating in a gas environment and isothermal cooling.

Request for a quote

Turkey

Workpiece carriers guarantee safe workpiece handling - especially when it comes to reliably protecting sensitive workpieces from damage during transport and cleaning. We develop and produce workpiece carriers for high-precision and sensitive components. This means that the components are carefully embedded and positioned in customer-specific automation magazines in such a way that they are easily accessible for a gripper. In addition to being used with manual handling, the workpiece carriers are particularly suitable for customers with a high degree of automation. The tailor-made solutions are mainly used in production with automatic parts removal and in the material flow of the automotive supplier industry.

Request for a quote

Turkey

Our range of products includes welded charging aids such as guide grids, charge carriers, tempering baskets, traverses, basket inserts, wire mesh baskets, charging baskets, heat-resistant workpiece carriers, as well as hardening boxes for the heat treatment of steel or other metals. good strength properties at high temperatures Continuous operation in air up to approx. 1150 ° C with temperature changes up to approx. 1000 ° C perfectly suitable for heat treatment We use according to customer requirements .EN 1.4845 / AISI 310S .EN 1.4841 / AISI 314 Both materials are heat-resistant steel. Due to the higher chromium and nickel content and have a good resistance to oxidation. The good strength properties are still present even at higher temperatures. Both also have excellent chemical resistance up to 1100°C.

Request for a quote

Germany

Plasma systems from Diener electronic have long since established themselves in a wide range of industrial sectors. With the Tetra 45 low-pressure plasma system, you can rely on modern and future-proof cold plasma technology in a vacuum. The chamber volume of approx. 45 litres of this plasma system offers enough space to serve series production / automation. Low pressure plasma treatment is a proven technique for controlled ultra-fine cleaning, adhesion enhancement (activation and etching) and coating of thin films on substrate surfaces. Plasma is generated by applying high-frequency voltage in the vacuum chamber. In the process, the process gas introduced there is ionised. Fields of application: VOC-free cleaning of organic residues Activation before painting, gluing, potting, ... Etching of PTFE, photoresist, oxide layers, ... Super-hydrophobic and -hydrophilic coatings

Request for a quote

Do you sell or make similar products?

Sign up to europages and have your products listed

Add my business

Germany

Plasma systems from Diener electronic have long since established themselves in a wide range of industrial sectors. With the Tetra 30 low-pressure plasma system, you can rely on modern and future-proof cold plasma technology in a vacuum. The chamber volume of 34 up to 50 litres of this plasma system offers enough space to serve series production / automation. Low pressure plasma treatment is a proven technique for controlled ultra-fine cleaning, adhesion enhancement (activation and etching) and coating of thin films on substrate surfaces. Plasma is generated by applying high-frequency voltage in the vacuum chamber. In the process, the process gas introduced there is ionised. Fields of application: VOC-free cleaning of organic residues Activation before painting, gluing, potting, ... Etching of PTFE, photoresist, oxide layers, ... Super-hydrophobic and -hydrophilic coatings

Request for a quote

Germany

Plasma systems from Diener electronic have long since established themselves in a wide range of industrial sectors. With the Nano low-pressure plasma system, you can rely on modern and future-proof cold plasma technology in a vacuum. The chamber volume of 18 up to 24 litres of this plasma system offers enough space to serve laboratory and also series production. Plasma treatment in low-pressure plasma is a proven technique for controlled ultra-fine cleaning, improvement of adhesion (activation and etching) and coating of thin layers on substrate surfaces. Plasma is generated by applying high-frequency voltage in the vacuum chamber. In the process, the process gas introduced there is ionised. Fields of application: VOC-free cleaning of organic residues. Activation before painting, gluing, potting, ... Etching of PTFE, photoresist, oxide layers, ... Super-hydrophobic and -hydrophilic coatings

Request for a quote

Russia

The СГИ 1200 cylinder head test stand is designed to detect micro cracks and air-tightness of the engine cylinder heads. The stand is equipped with a turntable for rotating the cylinder head in an aqueous solution and detecting tightness defects in different planes. This is a professional stand with pneumatic lifting and lowering of the turntable and electric 360-degree platform rotation drive. The cylinder head is sealed and placed in a heated aqueous solution. Thermal expansion of a heated part allows you to detect microcracks between valve seats, damaged plugs and other places in the cylinder head. Air is supplied through the opening in the cylinder head at a pressure of 4-6 bars. The presence of air bubbles allows you to detect a defective spot in the head.

Request for a quote

Germany

Plasma systems from Diener electronic have long since established themselves in a wide variety of industrial sectors. With the PlasmaBeam DUO atmospheric pressure plasma system, you can rely on modern and future-proof plasma jet technology under atmospheric pressure. Due to the treatment width of 8 - 10 mm, substrates can be precisely treated locally. PlasmaBeam technology can be used for inline processes. With the help of robots, 2 or 3-dimensional surfaces can be treated. PlasmaBeam enables local surface cleaning without masking the rest of the surface. For example, cleaning before wire bonding and various processes in the electronics industry. Furthermore, the PlasmaBeam is suitable as a pre-treatment device for the following processes: Gluing, bonding, printing, laminating, soldering, welding, flocking. The following surfaces can be treated with PlasmaBeam: Plastics, rubber, metal, glass, ceramics, hybrid materials.

Request for a quote

Germany

The effect achieved by the corona treatment is an increase in surface tension to values between 38 to 60 mN/m. Since the surface tension is caused by dispersive and polar interaction components the introduction of polar functional groups in particular increased the polar component of the surface tension.

Request for a quote

Russia

TEPLOPANEL climatic cassette-type panels operate on principle of thermal infrared radiation. Infrared waves, without air heating, turn into heat while contacting with the surface of objects and people. Thus, the heated objects emit heat secondary and give it to the air by means of convection. Functionally it is a low-temperature energy saving infrared emitter. The heat carrier is water preheated by any hot water boiler, central heat supply or alternative source (for example, heat pump). Thus, the water radiant panel is the best and the most effective energy saving infrared appliance, as it operates with water of up to 95°С. Water heating source operates on any type of fuel: gas, electricity, wood, pellets, waste oil, central heat supply. TEPLOPANEL system provides fast room heating, has low lag effect in comparison with any convective systems. Low temperature of heat distribution creates uniform temperature in the room and allows to use infrared heaters in fire-hazardous objects.

Request for a quote

Germany

Plasma systems from Diener electronic have long since established themselves in a wide range of industrial sectors. With the Tetra 2800 low-pressure plasma system, you can rely on modern and future-proof cold plasma technology in a vacuum. The chamber volume of approx. 2800 litres of this plasma system offers enough space to serve series production. Low pressure plasma treatment is a proven technique for controlled ultra-fine cleaning, adhesion enhancement (activation and etching) and coating of thin films on substrate surfaces. Plasma is generated by applying high-frequency voltage in the vacuum chamber. In the process, the process gas introduced there is ionised. Fields of application: VOC-free cleaning of organic residues Activation before painting, gluing, potting, ... Etching of PTFE, photoresist, oxide layers, ... Super-hydrophobic and -hydrophilic coatings

Request for a quote

Russia

TEPLOPANEL climatic cassette-type panels operate on principle of thermal infrared radiation. Infrared waves, without air heating, turn into heat while contacting with the surface of objects and people. Thus, the heated objects emit heat secondary and give it to the air by means of convection. Functionally it is a low-temperature energy saving infrared emitter. The heat carrier is water preheated by any hot water boiler, central heat supply or alternative source (for example, heat pump). Thus, the water radiant panel is the best and the most effective energy saving infrared appliance, as it operates with water of up to 95°С. Water heating source operates on any type of fuel: gas, electricity, wood, pellets, waste oil, central heat supply. TEPLOPANEL system provides fast room heating, has low lag effect in comparison with any convective systems. Low temperature of heat distribution creates uniform temperature in the room and allows to use infrared heaters in fire-hazardous objects.

Request for a quote

Germany

The new Enviro 1000 is an automatic water treatment system that purifies the process water and compound produced after vibratory finishing and reconditions it for renewed vibratory finishing operations. The centrifuge cleans and recycles the process water by separating the solid particles and often also oils from the process water and depositing them as solid sludge on the edge of the centrifuge basket used for this purpose. This cycle of processes: Vibratory finishing, cleaning and recycling the process water and finally reusing the process water in a renewed vibratory finishing process saves costs and is extremely environmentally friendly.

Request for a quote

Slovenia

Installing an air source heat pump is one of the best routes to savings with amazing returns for home and building owners. For every 1kWh of energy consumed the heat pump can produce up to 5kWh of thermal energy. Our heat pumps typically pay for themselves within 3.5 years or even less if you receive government subsidies or a grant for the system. The TermoPlus® air-source heat pumps require a combination of two units – an indoor unit and an outdoor unit. The indoor unit can either be a Hydrobox, which provides heating only, or a Hydrotank which produces both heating and domestic hot water (for showering, dishwashing etc.). The TermoPlus® air source heat pump range is designed to work with Mitsubishi outdoor units that provide both heating and cooling: either a Power Inverter unit or a Zubadan unit. The main difference between the two is that the Zubadan can operate in colder environments than the Power Inverter.

Request for a quote

Germany

"The MBS-Outdoor from SolarSpring is a compact and innovative water treatment plant.The system guarantees a reliable and safe water supply from contaminated and microbiologically contaminated water sources without the use of Chemicals. Tecnical data: Nominal flow rate: 50-200l/h Energy consumption: 40W Weight: 22kg"

Request for a quote

Russia

Electric infrared ceiling panels TEPLIY KVADRAT are low-temperature radiants for efficient heating of residential & office premises up to 4 m high. The system is based on principle of thermal infrared radiation. The advantage of transferring heat by radiation is the immediate effect of heating surfaces of objects that absorb heat from the panels, without preheating the air around them. Thus, all objects in the premises are heated, including floor, walls, furniture, equipment, etc. The heated objects emit heat secondary and give it to the air by means of convection. So, the system provides fast room heating, has low lag effect in comparison with any convective systems. Low temperature of heat distribution creates uniform temperature in the room. TEPLIY KVADRAT panels are designed for comfortable and energy-efficient heating of any kinds of rooms, except rooms with high humidity. The panels can operate directly from the socket or standard thermostat-controller.

Request for a quote

Request for quotes

Create one request and get multiple quotes form verified suppliers.

  • Only relevant suppliers
  • Data privacy compliant
  • 100% free