Air-conditioning technology - Import export

The SFS01 is particularly suitable for low flow velocities up to 3.5 m/s (in gases). It shows very fast measurement results of the flow rate as well as the flow direction. The Silicon Flow Sensor SFS01 offers three main characteristics: — Very fast response time <5 ms — Very low energy consumption — Easy system integration including temperature compensation Well-adapted channel geometries allow the performance of the sensor to be optimally aligned to the desired application. The SFS01 flow sensor is ideally suited for space-limited applications, but can also be easily upgraded to complete ready-to-use systems. Suitable application areas for the SFS01 flow sensor are flow measurements in battery-operated / portable devices, air conditioning technology (HVAC), automation technology as well as process and control engineering.

Whether in your own home, flat or office: air conditioning is a real boon in the hot summer. With a powerful wall-mounted device, staying in the living room or bedroom becomes bearable even in case of tropical outside temperatures. Moreover, modern inverter air conditioners with heat pump technology are recommended as a cost-effective additional heating system for the cold season. The only sticking point: the installation of an energy-saving split air conditioner always requires a hole to be drilled into the exterior masonry as well as the installation of an unsightly external unit. This structural change to the exterior facade is not only unattractive, but also subject to approval. As a tenant or flat owner, you have to obtain the consent of the homeowner before installation – an often tedious process.

High-quality and precise humidity sensor with integrated measuring transducer (output 0-10V) suitable for building automation, drying and air-conditioning technology (HVAC), outdoor or industrial applications.

Our B+B cable probes are a favourable alternative to measure temperature in liquid and gaseous media. Ideally suited for application in heating and air-conditioning technology as well as in building automation.

Our B+B cable probes are a favourable alternative to measure temperature in liquid and gaseous media. Ideally suited for application in heating and air-conditioning technology as well as in building automation.

Our B+B cable probes are a favourable alternative to measure temperature in liquid and gaseous media. Ideally suited for application in heating and air-conditioning technology as well as in building automation.

High-quality and precise humidity / temperature sensor with integrated measuring transducer (output 0-10V) suitable for building automation, drying and air-conditioning technology (HVAC), outdoor or industrial applications.

High-quality and precise humidity / temperature sensor (passive, Pt1000) with integrated measuring transducer (output humidity 0-10V) suitable for building automation, drying and air-conditioning technology (HVAC), outdoor or industrial applications.

High-quality and precise humidity / temperature sensor with integrated measuring transducer (output 0-10V) suitable for building automation, drying and air-conditioning technology (HVAC), outdoor or industrial applications.

Our B+B cable probes are a favourable alternative to measure temperature in liquid and gaseous media. Ideally suited for application in heating and air-conditioning technology as well as in building automation.

Protection of pipes and channels in the whole range of air-conditioning and ventilation technology In the cladding and metal construction, e.g. at railings, bridge parts or supports Advantages and benefits High efficiency through excellent adhesive properties and high resistance of the cured film to impact and scratches Best use as decoration layer of all metallic sur Economically due to low consumption and self-cleaning valve

Universal use for a wide range of applications Ice stores are used in more and more areas of technology. In addition to the classic areas of application in refrigeration, air conditioning and commercial kitchen technology, ice storage systems and cold water systems are increasingly being used in process engineering systems. Cold water for subsequent production processes is generated with ice storage tanks. Ice storage systems thus provide stored cold. Use of cheap night electricity tariffs With the help of ice storage technology, cheap nighttime electricity tariffs can be used. During the night, ice is continuously built up on the plates or on the pipe coils. This ice is then available during the day as stored cooling capacity. This can significantly reduce energy costs. The cooling units can also be made smaller when using ice storage systems.

Specifi cation: BRN M5x7x26 KK steel, hose connection, galvanized Grip range: 0,50 - 2,50 mm Predrilled hole ø: 7,1 + 0,1 mm Use: Connection of a pneumatic hose (ø 4 mm) for use with liquids and gases Customer advantages: • Reduction in variety of parts • Better look (single colour) • Reduced assembly effort • Simplified assembly process • Access to component from one side • Saving on material and assembly costs Sectors: • Ventilation and air conditioning technology • Pneumatics accessories • Housing and container manufacturing

The OPTO multigrip blind rivet with his especially embossed rivet shaft, is distinctly different to a standard blind rivet. Due to his constructive structural, the rivet guarantees lots of excellent performance characteristics: — large grip range — good filling capacity of the borehole — non-positive locking of the captive mandrel without clearance — no rattling sounds — dustproof and splash water-tight Preferred applications for OPTO multigrip blind rivets can be found in the field of vehicle manufacturing, in air conditioning technology as well as in the production of tanks and cntainers. Furthermore, this rivet type is excellently suited for use as a repair rivet. Honsel develops for this blind rivet type special variants for the serial producti on, too, e. g. large grip range low grip range with a diameter up to 8,0 mm!

EGE flow sensors for gaseous mediums without integrated amplifier permit the space-saving flow measurement on site and the comfortable setting of the limit value using separate amplifier, e.g. within a control cabinet. The measurement takes place without mechanically moving parts using a thermal measuring element. The current flow state is displayed at the amplifier using LEDs. The devices are used wherever a safe, robust and low-maintenance monitoring of flow values is required. This includes e.g. air conditioning technology, monitoring of exhaust air systems and ventilation monitoring.

EGE compact devices for the flow monitoring of gaseous media contain measuring and amplifier in a single housing. They are used where a visualisation of the flow rate on site is required. EGE flow sensors for gaseous media feature two pins which contain the thermal measuring elements. The sensors are set up directly at the device. EGE sensors for gaseous media are characterised by a rapid response capability and reliable operation. Based on the principle, there are no moving parts in the air flow monitors and they can, therefore, also be used in aggressive environments. Devices for air conditioning technology have smooth measuring surfaces and need not protrude far into the flow duct.

• Very slim, light-weight construction for shirt or coat pocket, with clip • Universal key for almost all common switch cabinets & closures • Key profile for these applications: electrical engineering, heating and sanitary installations, air-conditioning and ventilation, industry, building technology, e.g. switch cabinets, mains switchboards, locking systems, technical installations and many more • Bit (1/4") made from high-quality tool steel and specially hardened • Universal 1/4" bit holder for standard bits, with permanent magnet to hold bit in place • With ultra-bright LED torch in the clip • The twist mechanism allows four different profiles to be activated. • Made of reinforced fibreglass plastic • Made of zinc casting (GD-Zn)

• Universal key for almost all common switch cabinets & closures • Key profile for these applications: electrical engineering, heating and sanitary installations, air-conditioning and ventilation, industry, building technology, e.g. switch cabinets, mains switchboards, locking systems, technical installations, for venting heating systems and many more • The twist mechanism allows eight different profiles to be activated. • Universal 1/4" bit holder for standard bits, with permanent magnet to hold bit in place • Made of reinforced fibreglass plastic • Made of zinc casting (GD-Zn)

• For almost all common closures • Key profile for these applications: electrical engineering, heating and sanitary installations, air-conditioning and ventilation, industry, building technology, public services e.g. switch cabinets, mains switchboards, locking systems, technical installations, for venting heating systems and many more • With strong chain and snap hook • Universal 1/4" bit holder for standard bits, with permanent magnet to hold bit in place • The twist mechanism allows eight different profiles to be activated. • Made of zinc casting (GD-Zn)

• For almost all common closures • Key profile for these applications: heating and sanitary installations, air-conditioning and ventilation, industry, building technology, e.g. doors & windows in new buildings, locking systems, technical installations, for venting heating systems and many more • Universal key for almost all common switch cabinets & closures • Universal 1/4" bit holder for standard bits, with permanent magnet to hold bit in place • With bottle-opener • Made of zinc casting (GD-Zn)

• Very slim, light-weight construction for shirt or coat pocket, with clip • For almost all common closures • Key profile for these applications: heating and sanitary installations, air-conditioning and ventilation, industry, building technology, e.g. doors & windows in new buildings, locking systems, technical installations and many more • Bit (1/4") made from high-quality tool steel and specially hardened • Universal 1/4" bit holder for standard bits, with permanent magnet to hold bit in place • The twist mechanism allows three different profiles to be activated. • With ultra-bright LED torch in the clip • Made of reinforced fibreglass plastic • Made of zinc casting (GD-Zn)

• Universal key for almost all common switch cabinets & closures • Key profile for these applications: electrical engineering, heating and sanitary installations, air-conditioning and ventilation, industry, building technology, e.g. switch cabinets, mains switchboards, locking systems, technical installations, for venting heating systems and many more • Universal 1/4" bit holder for standard bits, with permanent magnet to hold bit in place • With bottle-opener • Made of zinc casting (GD-Zn)

Profiles for Industrial Applications. In the large group of industrial applications (refrigeration and air-conditioning technology, machines, production lines, switchgear housings, wind power, tracked crane systems, containers, etc.) we produce individual sealing systems tailored to our customers’ needs. Special designs made on short notice--even in small series--made of diverse plastic or elastomer qualities, or combinations of both materials or assemblies lets us be your technical problem solver. Our huge stock of standard profiles makes us a reliable partner for a wide-range of applications. Sealing Profiles Through application-specific production of rings, frames or fixed lengths, the product is precisely tailored to any purpose. The function of the profile is optimally executed even in the radiuses or corners. We manufacture ready-made profiles in various processes, from cold bonding, film bonding, injection molding to sealing.

Gronemeyer Heliflex storage systems store general cargo that is up to 400 mm wide and 160 mm high. The products are transported on a plastic Heliflex chain. The chain is wound around two rotating towers in a spiral. The products are later re-fed into production by operating the system in reverse. The machine works according to the First In-Last Out principle. Technical data: —Chain width: up to 400 mm —Usable chain length: up to 1,000 m —Independent electrical control system Optional equipment: —Loading and unloading belts —Insulated module with air conditioning technology for perishable goods

The Gronemeyer FIFO spiral buffer stores general cargo and bulk goods. The products are transported on a plastic mat conveyor chain. The chain is wound around one or two rotating towers in a spiral. The design of the machine permits storing unpackaged food. The machine works according to the First In-First Out principle. Technical data: —Chain width: up to 1,400 mm —Usable chain length: up to 1,000 m —Independent electrical control system Optional equipment —Loading and unloading belts —Insulated module with air conditioning technology for perishable goods

The Gronemeyer revolving storage is the space-saving solution for storing solid, cube-shaped general cargo. The storage process occurs in cycle operation. The products move into the machine batch-by-batch and are stored vertically in compartments. The machine works according to the First In-Last Out principle. Technical data: —Length of batch: up to 3000 mm —Number of batches: up to 50 —Independent electrical control system Optional equipment: —Complete machine cover made of Makrolon with maintenance doors —Loading and unloading belts —Insulated module with air conditioning technology for perishable goods

The Gronemeyer accumulation table can store large quantities of glasses, bottles or tins. The products are pushed to the accumulation table if there is backlog. The products are later re-fed into production by operating the system in reverse. The machine works according to the First In-Last Out principle. In case of malfunction, the electrical control system activates the accumulation table based on sensor messages. After the malfunction ends, the stored products are automatically fed into the line. Technical data: —Chain width: up to 3,000 mm —Usable chain length: up to 20 m —Independent electrical control system Optional equipment: —Complete machine cover made of Makrolon with maintenance doors —Loading and unloading belts —Insulated module with air conditioning technology for perishable goods

Control cabinets form the technical "central nervous system" of every production plant. They supply machine and plant components with electrical energy, protect electrical circuits, control drives and network machines with the Internet. In addition, they act as an interface for all information on the current plant and processing status and link production exactly where processes need to be accelerated and efficiency increased. Our subsidiary ATR Industrie Elektronik GmbH is your competent partner for the construction of switchgear and switch cabinets. We supply a wide range of different versions based on all current national and international standards. Switchgear is used in almost all industries, in addition to the wood-based panel and metal industry, e.g. in the automotive sector, in turbine and compressor technology, in energy supply or also in cooling and air-conditioning technology.

Our custom blow molded parts such as containers, air conduction tubes, connection tubes and drainage tubes are 3D blow molded, suction blow molded and manipulated by a robot (3-D Roboter Blow Moulding Machine). They are 100 percent leak-proof and guarantee consistent wall thickness. Since the blow molds are developed by and tailored to customer specific requirements, a perfect fit is guaranteed, the number of assembly steps is reduced, weight is reduced and the risk of leakage is minimized. Available materials / maximum operating temperature: PE / -40°C up to + 70°C PP / -40°C up to +105°C Dimensions: max: 900x500x300mm min: 50x20x100mm eight/pc.: 10-3.000 Gramm diameter: min. 8-10 mm Application: Industrial applications, such as home appliances, air conditioning, medical technology, etc.