Ballistic equipment and testing - Import export

Safe, reliable and easy measurements of the exit speed made at the muzzle of firearms. Special design to be integrated into safe test rigs for material testing. Examples of application: Simulation of hailstorm on solar cells, simulation of stone-chipping on coated surfaces or on windscreens, examinations concerning the effect of projectiles on bulletproof vests, bulletproof doors and other security equipment. All models can be equipped with various possibilities to draw up test reports automatically.

Ballistic Block Damping Bricks Ballistic Rubber Block Specially formulated with rubber supported by flame retardant chemicals. Due to the fact that rubber is produced by vulcanizing under high pressure and high temperature, the rubber is able to trap bullets much higher than its volume. The hardness of the produced blocks was adjusted to protect the projectile from splashing on the surface. Blocks on the side walls are produced in such a way that the projectiles do not bounce the bullet for interactive targets. It is designed to be used in Homeland Security, Military and Police Schools, Security and Special Protection Systems and in all shooting ranges.

For checking the gas detection and gas measuring devices. All gases can be connected in 12 liter aluminum pressurized gas cans.

Test gas set for testing gas detection and gas measuring devices GPL and GPD. According to the DVGW rules, a weekly check with 1 vol% CH4 is necessary. With screw-on extraction adapter and display of the flow. Delivered with conditioning filter in a carrying case (not including GasPen).

You can find the gas concentration needed for each device in the user's manual. There are additional costs for shipping by air freight. We recommend using the test gas set or a sampling valve.

Test station for checking the gas detection devices according to G465. The control of the minimum sensitivity (10ppm) and the control of the display accuracy 1Vol% - 2.2 Vol.% -100 Vol% -5 Vol.% CO2 are possible. All gases can be connected to 1 liter aluminum compressed gas cans. The remaining pressure of the bottle is always displayed. If larger quantities of gas are required, a steel pressure gas bottle can also be connected via an adapter and the pre-pressure reducer. Rather than a pressure gauge, the PS 403-US has a vacuum manometer. In the PS 403-US model, the control buttons are replaced by toggle switches. With flow measurement. The test gas is conditioned (humidified)

Test station for revising gas detection devices. The control of the minimum sensitivity (10ppm) and the control of the display accuracy 1Vol% - 2.2 Vol.% -100 Vol% -5 Vol.% CO2 are possible. All gases can be connected to 1 liter aluminum compressed gas cans. The remaining pressure of the bottle is always displayed. If larger quantities of gas are required, a steel pressure gas bottle can also be connected via an adapter and the pre-pressure reducer. Rather than a pressure gauge, the PS 403-U has a vacuum manometer. With flow measurement. The test gas is conditioned (humidified)

Test station for checking the gas detection devices according to G465. The control of the minimum sensitivity (10ppm) and the control of the display accuracy 1Vol% - 2.2 Vol.% -100 Vol% -5 Vol.% CO2 are possible. All gases can be connected to 1 liter aluminum compressed gas cans. The remaining pressure of the bottle is always displayed. If larger quantities of gas are required, a steel pressure gas bottle can also be connected via an adapter and the pre-pressure reducer. With flow measurement. The test gas is conditioned (humidified)

Test station for checking the gas detection devices according to G465. The control of the minimum sensitivity (10ppm) and the control of the display accuracy 1Vol% - 2.2 Vol.% -100 Vol% -5 Vol.% CO2 are possible. All gases can be connected to 1 liter aluminum compressed gas cans. The remaining pressure of the bottle is always displayed. If larger quantities of gas are required, a steel pressure gas bottle can also be connected via an adapter and the pre-pressure reducer. With flow measurement. The test gas is conditioned (humidified)

Test station to review the gas detection devices. The control of the display accuracy 1Vol% - 2.2 Vol.% -100 Vol% -5 Vol.% CO2 is possible. All gases can be connected to 1 liter aluminum compressed gas cans. If larger quantities of gas are required, a steel pressure gas bottle can also be connected via an adapter and the pre-pressure reducer. With flow measurement. The test gas is conditioned (humidified)

The FlowFlex Rapid Lateral Flow Antigen Test Kit uses the latest patented technology to detect proteins, ensuring that it can detect new strains of the COVID-19 virus. Using a simple nasal swab within 2cm of the nose makes it extremely easy to administer an accurate test.

The Poppe + Potthoff impulse test stands test the operating or fatigue strength of various metal and plastic components. The endurance test in our high-pressure test systems simulates the life-cycle under varying loads. The failure tests thus show the potential weaknesses of the components with respect to design and material. The pressure is optionally modulated as a sine wave, trapezoid curve or needle pulse. Our test stands are characterized by a special ergonomics and are designed by Poppe + Potthoff machine design. Due to our flexible modular design, our machines are very variable, so that the pressure and volume range is designed according to the customer’s requirements. Of course, our systems are UL or CE compliant as required. In addition, we offer you service and support directly on-site.

In order to prove the quality of the fluid-carrying parts, all hoses, pipes, pressure vessels and other components are put under pressure until they burst. The process is precisely measured and documented in order to optimally design the components for specific applications.

Development of rotating components require intensive testing. While the main goal may be reaching durability and life targets,noise , vibration, temperature and other parameters may play an important role for the customer expectations. Therefore, Novosim offers a customizable testing dynamometer which may be used to in the product development of passenger, commercial, heavy duty or even military vehicle components. Software is easy to use and also highly customizable allowing different product lines to be tested under a single system. With the help of regenerative braking, electricity is recovered and loops back to the test system providing efficient operation. Assuming the tests may run about 1 month, the consumption can be an important parameter for cost control. Different types of data can be collected and stored in a database for further comparisons and tracking of the development process. System automatically generates a report which is also customizable.

Alpha Cabins (Determination of acoustic properties of materials) Cabins are used to determine the acoustic absorption properties of materials and are generally called "acoustic test cabins" or "reverberation rooms". These cabins are designed to detect the sound absorption properties of materials against frequency, measure their acoustic performance and determine their properties. Here are some of different types of cabins: ​ Reverberation Rooms: In these rooms, sound waves hit and reflect on surfaces and resonate for a while. In this process, the acoustic absorption capabilities of the material are measured. Acoustic Test Booths: These booths are designed to evaluate the acoustic performance of specific materials or products. They often include high-sensitivity microphones, sound sources and measuring devices. Acoustic Rooms: These rooms are generally large and can be specially designed. It is used for larger-scale or special tests of the acoustic properties of materials.

This system is very valuable for testing the durability and expected life of the transmissions, axles, gears, transfer cases and shafts under various scenarios. It is hard to do vehicle level durability tests and without the need of getting the vehicle on the road for replicating claims caused by the powertrain, such type of a custom system help replicate the driving conditions where problems occur and the engineering team can develop a solution and iterate on the bench. Easy to use user interface; simplicity in get the system running in a target time is our most important goal. Operators in a test center can quickly receive training and begin running a variety of scenarios. Data from low speed channels such as sensors including thermocouples, RTD temperature sensors, pressure sensors and others can be collected whereas data from fast channels such as acceleration or microphone are collected through data collection (DAQ) systems, depending on the customer's preference.

This test bench for filtering fabrics is a unique instrument conceived and manufactured by us. This product has been designed in order to test filtering fabrics and identify any filtration leaks. The testing process is executed using paraffin oil aerosol. This device complies with UNI EN 149 -143. Price: €18.000,00

The Box Opening Pressure Tester has been designed to measure the opening force of flat stacked carton boxes. The Box Opening Pressure Tester is used for the development and quality control of cartons during production, there for speeding up production set-up time. This motorized test stand is a highly configurable single column force tester for tension and compression measurement applications up to 300 lbF (1.5kN). It has a rugged design suitable for laboratory and production enviroments. With generous travel, clearance and depth dimensions, a wide range of tests can be performed, including break testing, cycling, limit testing to a load or distance, loadholding, elongation testing, tensile testing, compression testing and more.

The Foam Porosity Tester is used for monitoring the porosity of flexible cellular polyurethane. The machine determines how easy air passes through a cellular structure. Airflow values may be used as an indirect measurement of certain cell structure characteristics. The F0031 model foam porosity tester is made with reference to international standards for measurement of a flexible cellular test piece, 50mm x 50mm x 25mm, it is placed in a vacuum chamber cavity and a specified automatic constant differential air pressure is applied. The F0031’s Pa Pressure can be digitally set on the display and once the FPT reaches the Pa automatically the rate of airflow at the set Pa is locked in and (Held) on the Flow display automatically completing a test in seconds.

Mechanical Devices is pleased to offer its customers with the first direct phase change TCU with DUAL head. Each head can be controlled individually. This DUAL head unit makes it possible to reduce the cost per workstation, saves space, reduces power consumption and heat emission in the laboratory or production hall. Temp. range: -30°C to 200°C Super economical Reduced cost per workstation Fully programmable for automation Fits 19″ rack cabinet Maintenance FREE Perfect for QSFP, QSFP-DD..

There are several different methods used for the evaluation of innersprings and boxsprings, testing for measurements regarding firmness, firmness retention, durability, effect of impact etc. The Cornell Type Tester is used to test the long term capacity of bedding to resist cyclic loading. The machine consists of a double hemispherical ram head on a manually adjustable shaft. A load cell is located on the ram head to measure the force being applied to the mattress. The shaft is connected to an adjustable eccentric which is rotated by an electric motor at up to 160 cycles per minute, variable. The bedding is located below the ram, and the eccentric and shaft position adjusted so that the maximum load of 1025N and the minimum load of 22N is applied when the eccentric is rotated to the lowest and highest positions respectively. A position transducer is located so the position of the ram head can be measured automatically.

laserXtens Array HP features a measuring head incorporating seven fixed high-resolution cameras. The overlapping fields of view of the seven cameras are combined into a single large image, giving a very large measuring range.Advantages of laserXtens Array - laserXtens Array HP possesses an extremely large measuring range, combined with a resolution of 0.10 μm. - laserXtens Array HP has no moving parts and is completely maintenance-free. - laserXtens Array HP satisfies the requirements of Class 0.5 of ISO 9513 (Class B2 of ASTM E83). - Used for strain-rate-controlled tests to ISO 6892-1 Method A1 (closed loop) for gage lengths from 30mm. Different gage lengths can be set in fractions of a second. laserXtens Array HP can also measure transverse strain with no need for additional markings; biaxial measurement is additionally possible. Determination of strain distribution and strain at break as per Annex H of ISO 6892-1

With a maximum impact speed of 4.4 m/s and a drop weight of 23,5 kg, this drop weight tester is ideally suited for puncture tests to ISO 6603-2. A standout feature is the excellent test area accessibility, enabling rapid completion of test series including direct feeding of temperature-conditioned test plates. This drop weight tester is unbeatable when it comes to efficiency and operator-friendliness. Range of application: The Amsler HIT230F is ideally equipped for multiaxial impact puncture tests on plastics. Its range of application includes material characterization of standard specimens in accordance with established standards in research and development and quality assurance. • Multiaxial impact puncture tests to ISO 6603-2, ASTM D 3763, at room temperature and in extended temperature range.

FlexTC Thermal Forcing System stimulates DUT to the desired temperature by direct contact/conduction between a thermal head’s plunger and the DUT. Soldered down or socketed DUT’s are accessed through a selection of interfaces such as adapter plates, boom stands, vacuum and pneumatic systems. . Powerful stand-alone Thermal control unit, Features: o Greatest cooling power 21W@-40⁰C o Extended temperature range enable to reach easily -40⁰C or less at Tj o Fastest time to temperature ratio o Very short stabilize soak time o Excellent temp. stability 0.2⁰C o Operated by a smart controller which is accessed through a 7” color touch-screen with extensive menu o Can be remotely controlled via an Ethernet Flex TC System suits your device test at: o Your test bench o ATE in your lab. & can be seamlessly integrated in production with handlers and ATE’s o MaxTC can also be used to test multi-site DUT’s o Also as a thermal chuck with probe station

The Kappa creep testing machine is a flexible and highly-precised creep testing machine used for maximum cost-effectiveness. It is fully equipped with a test frame having four steel columns for high lateral and axial stiffness. It is powered by top-quality components that includes testXpert® II testing software and test control measurement and control devices. It has attained success due to its successful installations worldwide. It features an intelligent sensor technology which recognizes and calibrates all the sensors that are connected including their projected force limits and environments. It generally focuses on the most essential requirements of creep testing which include load, temperature, strain and data security.

Cranage has multiple testing facilities, accredited by UKAS, to test for EMC as well as radio communication, electrical safety, mechanical and environmental performance. Our Engineers have experience of testing hundreds of different products, including wheelchairs, ECG Monitors, hair styling appliances, household appliances, PCB's, Vacuums, Information point systems, Electric gates, metering systems. We can test and evaluate within the following sectors- Lab and Scientific equipment, Medical Devices, Household appliances, IT equipment, Industrial and Machinery Equipment, Lighting, Electrical Fittings, Road and Rail equipment, Security, Fire and Smoke equipment, Mobility aids and Stairlifts. If your equipment is large or in-situ we can also offer EMC testing at your premises. Our pre-compliance testing is used to identify potential issues during product development.

The TP platform system is a breakthrough product that introduced the use of refrigerant for active cooling & heating of components with no need of chiller, CDA, or consumable refrigerants such as liquid nitrogen and liquid carbon dioxide. It can be a perfect replacement system in the industry for uncompromising thermal and mechanical performance with a temperature ranging from -60 to 220°C. Each system contains a thermal chuck and a self-contained thermal control unit. Features: * Temperature range of -60°C to +220°C, * No LN2 or CO2 required * No chiller or CDA required * Temperature stability +/-0.1 * Fully programmable for automation * Quite & portable * Maintenance FREE

The MP Computer is a comfortable, comprehensive and easy-to-handle evaluation, display and control unit for different types of engine test beds. Its clear and ergonomic arrangement fascilitates the work with the test bed. Desired loads can be adjusted quickly and easily. Specialists are not required. Many optional additional functions increase enlarge the comfort of the MP Computer. Maintaining permanent accuracy of torque measurement is facilitated by a semi-automatic calibration routine. Existing engine/motor test beds can be modernized by an MP Computer. Examples of optional additional functions: - Automatic gravimetric determination of the specific fuel consumption. - Several possibilities of output and documentation of measured values. - Acquisition of non-electric and electric measuring values on combustion engines, electric machines, etc. - Special functions required by certain measuring tasks.