Circulating pumps - Import export

Evaporative closed loop cooling towers : For temperatures above 32°C. Cooling capacities are selected to suit the local site wet bulb temperature, up to 30°C ( Wet Bulb ) to provide the most efficient cooling system. The tower and the water pump are controlled by the compressor’s electrical cabinet. Option : two speeds fan motor for winter and summer, antifreeze protections, tracing. Radiator cooling systems. Selected for maximum ambient temperatures up to 32°C, other selections accepting temporary heat peaks up to 36°C and 40°C during some hours per day. These specific versions are equipped with an automatic spray system with thermostatic control The radiator fans and the water pump are controlled by the compressor’s electrical cabinet. The water pump. is mounted on the compressor’s base plate. The cooling system, its functions (automatic spray system for radiators and antifreeze protections for cooling towers) and the water circulating pump are thermostatically monitored by...

The Topstart (Bio)diesel & Oil is an electrical preheating system with forced circulationmade to warm up the (bio)diesel or oil of the engine. It is universal, reliable, easy-to-install and maintenance-free. The system has also following advantages: fuel savings, decreasing pollution, reduced engine wear, no more difficult cold starts. (Bio)diesel & Oil preheater with circulation pump Heavy machined aluminium body 100% recyclable Very compact product with integrated circulating pump for quick and homogeneous preheating Integrated powerful circulating pump saving electricity andimproving the life cycle of engine components Heating element with top-quality shielding and low specific power, increasing its life-cycle Control thermostat with high cutout power for an optimized life cycle Safety thermostat with manual re-set option to protect the heating element if (bio)diesel or oil levels in the circuit are low or if the control thermostat fails High waterproofness Easy replacem

The FlowStart is an electric coolant engine heater for all types of water-cooled engines. It is a system universal, reliable, easy to install and maintenance free. The FlowStart are suitable for all industrial applications either stationary (generator sets) or mobile (heavy-duty vehicle). The engine heater can be put into service a few hours before starting the engine or it can work in standby, in order to keep the engine permanently at the required temperature. This ensures an easy full power start whatever the ambient temperature and avoids cold start mechanical damages. The system has also following advantages: fuel savings, decreasing pollution, reduced engine wear, no more difficult cold starts. Download the technical sheet Advantages: Heavy aluminium injected body 100% recyclable Very compact product with integrated circulating pump for quick and homogeneous preheating Integrated circulating pump saving electricity and improving the life cycle of engine components Low watt den

The Aqualine v2 is a heating and circulating unit for stall drinking bowls. It ensures the supply of temperate drinking water in winter time and prevents the water from freezing in the bowls. Water temperature is a determining factor for the transformation of food into energy. Cattle always prefer warm water. For example, to heat 50 liters of water of 0°C to 39°C, the animal will spend 1950 calories, which is approximately the third of its daily needs. It can be connected to any drinking bowl line for cows, calves, sheep, pigs, horses, etc. The Aqualine v2 can be supplied in 3 versions : without control box, with control box or with digital control box. Download the technical sheet Advantages: Very strong heating body made in stainless steel, 100% recyclable Low watt density heating element made of Incoloy 800 (7,5W / cm²) what increases its lifetime and those of the coolant Integrated circulation pump into the heating body allowing a fast and homogenous preheating. Very compact pro

The Aqualine v2 is a heating and circulating unit for stall drinking bowls. It ensures the supply of temperate drinking water in winter time and prevents the water from freezing in the bowls. Water temperature is a determining factor for the transformation of food into energy. Cattle always prefer warm water. For example, to heat 50 liters of water of 0°C to 39°C, the animal will spend 1950 calories, which is approximately the third of its daily needs. It can be connected to any drinking bowl line for cows, calves, sheep, pigs, horses, etc. The Aqualine v2 can be supplied in 3 versions : without control box, with control box or with digital control box. Advantages: Very strong heating body made in aluminium with coating Abcite , 100% recyclable Low watt density heating element made of Incoloy 800 (7,5W / cm²) what increases its lifetime and those of the coolant Integrated circulation pump into the heating body allowing a fast and homogenous preheating. ...

The TopStart 0.5 – 4Kw is an electric coolant heater for all types of water-cooled engines. The heater can be put into service a few hours before starting the engine or work continuously in order to keep the engine permanently at the required temperatur. This ensures an easy full power start whatever the ambient temperature and avoids cold start mechanical damage. The system has the following advantages: fuel savings, decreasing pollution, reduced engine wear, no more difficult cold starts. It is universal, reliable, easy-to-install and maintenance free. The TopStart heaters are suited for all industrial applications, either stationary (generator sets) or mobile (emergency vehicles, trucks, vans, etc.). Download the technical sheet Advantages: Strong die-casted aluminium body, 100% recyclable Low watt density heating element made of Incoloy 800 (7,5W / cm²) what increases its lifetime and those of the coolant Integrated circulation pump into the heating body allowing a fast and homo

An indirect dry cooling system is characterized by the use of a condenser and air-cooled heat exchangers.The cooling system consists of the following main components :condenser (surface or spray type),cooling water circulating pumps and recovery turbines, if applicable,heat exchanger deltas including louvers,natural draft cooling tower,piping and valves,water storage tanks and transfer pumps,electrical equipment,instrumentation and control,accessories such as cleaning system, nitrogen blanketing system,The warm water from the condenser is delivered to the natural draft cooling tower by the cooling water circulating pumps and an underground piping network. After the cooling in the heat exchangers, the cold water returns to the condenser.