Cable cutters - Import export

To cut electrical cables max ¯ 18mm, Cu + Al, Length 180mm

To cut electrical cables max ¯ 18mm, Cu + Al, Length 180mm

• For cutting flat cables without squeezing • Improved cutting geometry for simple cutting and higher operating times • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Precision cutting edge for a smooth and clean cut without any burrs • Re-adjustable screw-joint • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Ergonomic handle position and shape for optimum power transmission • Professional design for easy handling under permanent load • Made of special tool steel, forged, oil-hardened

• For stripping and cutting copper and aluminium cable • Improved cutting geometry for simple cutting and higher operating times • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Precision cutting edge for a smooth and clean cut without any burrs • Not suitable for steel wire, aluminium alloys and hard-drawn copper conductors • Re-adjustable screw-joint • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Ergonomic handle position and shape for optimum power transmission • Professional design for easy handling under permanent load • Made of special tool steel, forged, oil-hardened

• For cutting copper and aluminium cable with strong rubber or plastic sheathing • Special cutting geometry and precision cutting for a clean cut without any burrs • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Not suitable for steel wire, aluminium alloys and hard-drawn copper conductors • Opening of the blade in each position possible • Optimum leverage, easy handling and minimum effort by ratchet action • Made of special steel, high-strength parts that are especially subject to wear and tear are additionally hardened and tempered

• For stripping and cutting copper and aluminium cable • Improved cutting geometry for simple cutting and higher operating times • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Precision cutting edge for a smooth and clean cut without any burrs • Not suitable for steel wire, aluminium alloys and hard-drawn copper conductors • Re-adjustable screw-joint • Handles coated with plastic • Professional design for easy handling under permanent load • Made of special tool steel, forged, oil-hardened

• For stripping and cutting copper and aluminium cable • Improved cutting geometry for simple cutting and higher operating times • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Precision cutting edge for a smooth and clean cut without any burrs • Not suitable for steel wire, aluminium alloys and hard-drawn copper conductors • Re-adjustable screw-joint • Handles coated with plastic • Professional design for easy handling under permanent load • Made of special tool steel, forged, oil-hardened

• For stripping and cutting copper and aluminium cable • Improved cutting geometry for simple cutting and higher operating times • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Precision cutting edge for a smooth and clean cut without any burrs • Not suitable for steel wire, aluminium alloys and hard-drawn copper conductors • Re-adjustable screw-joint • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Professional design for easy handling under permanent load • Made of special tool steel, forged, oil-hardened

The powerful "universal cutting machine" with superior pulling and cutting strength. The contact pressure between the conveyor belts is pneumatically controlled and opens and closes automatically when the cover is opened and closed. Ideal for solid and dimensionally stable materials. Metzner also offers the Variocut in three “Red – Green – Blue" equipment lines. Each equipment variant is based on the same basic model with the same high-quality mechanical components. The individual models differ in speed, control and the interfaces for peripherals.

Device details: ■ Ideal cutting results ■ Improved sample quality through an exact and reproducible sample thickness ■ Suitable for a wide variety of materials ■ Robust and durable blade with double wear time (2-sided usable) ■ Exact adjustment of the rotating speed ■ The influence of the operator is minimized by the predefined blade feed ■ Fine, manual dosing of the progessive feed Area of application: ■ Sample preparation according to IEC EN 60811 ■ Cutting device for samples with an outer diameter up to 65 mm (2.56 Inch) ■ Optimal preparation of samples before the precise analysis on the offline cable meaurement device ■ Use of the O-Ring Cutter VC is essential for your Quality Management ■ Precise and repeatable measuring results possible with conistent cut samples ■ The VC65 supplements the measurement devices of the VCP series with even and consistently cut samples ■ Compact and light device for laboratories and in the production

Save up to ⅔ measuring uncertainty with well prepared samples ■ Easy and fast operation ■ Robust, compact device out of stainless steel - no corrosion ■ 4 different adapters to stabilise the samples (on request more adapters of different sizes available - Product No.: 402.0007.13) Area of application: ■ Sample preparation according to IEC 60811 ■ Sample cutting device for cutting very small samples up to 3.5 mm (0.14“) outer diameterdepending on material and wall thickness ■ Optimal cable preparation device for measurements with offline cable measurement devices ■ Use of the Cable O-Ring Cutter is essential for your Quality Management ■ Compact and light device to easily use in laboratories and production halls

Device details: Save up to ⅔ measuring uncertainty with well prepared samples ■ Quick and efficient cut ■ Thin, evenly and parallel cut samples with a smooth surface ■ Is a ideal complement to ORC65 and ORC150 ■ First ORC device which cuts sectors with ease ■ LED light to illuminate the cutting process Area of application: ■ Sample preparation according to IEC 60811 ■ Quick and efficient cut of hard materials (PE, XLPE) with an outer diameter up to max. 80 mm (3.15“) ■ Optimal cable preparation device for measurements with offline cable measurement devices ■ Use of the Cable O-Ring Cutter is essential for your Quality Management ■ Compact and light device to easily use in laboratories and production halls

Device details: ■ Quick and efficient cut ■ Thin, evenly and parallel cut samples with a smooth surface ■ Very robust device made of aluminium and stainless steel - no corrosion ■ By using special chuck jaws it is even possible to cut larger samples with an outer diameter up to 200 mm (7.87“) ■ Light to illuminate the cutting process ■ Precise and repeatable measuring results possiblewith the cut samples Area of application: ■ Sample preparation according to IEC 60811 ■ Optimal cable preparation device for measurements with offline cable measurement devices ■ Cut samples complement the cable measuring devices from the VisioCablePro® series ■ Use of the Cable O-Ring Cutters is essential for your Quality Management ■ Easy use in laboratories and production halls

Device details: ■ Save up to ⅔ measuring uncertainty with well prepared samples ■ Very robust device for quick and efficient cutting of flat cables ■ Exact adjustment of the sample thickness (depending on material) ■ Thin, evenly and parallel cut samples with a smooth surface (especially the very small and many cores require a very thin cut to avoid shadows) ■ Precise and repeatable measuring results due to reproducible samples Area of application: ■ Sample preparation according to IEC 60811 ■ Cutting device for flat cable samples up to a width of max. 75 mm (2.95“) and a height of max. 8mm (0.31“) ■ Optimal cable preparation device for measurements with offline cable measurement devices ■ Use of the FCC75 is essential for your Quality Management ■ Compact and light device to easily use in laboratories and production halls

• For cutting flat cables without squeezing • Improved cutting geometry for simple cutting and higher operating times • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Precision cutting edge for a smooth and clean cut without any burrs • Re-adjustable screw-joint • Handles coated with plastic • Ergonomic handle position and shape for optimum power transmission • Professional design for easy handling under permanent load • Made of special tool steel, forged, oil-hardened

• For cutting flat cables without squeezing • Improved cutting geometry for simple cutting and higher operating times • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Precision cutting edge for a smooth and clean cut without any burrs • Re-adjustable screw-joint • Handles with ergonomically shaped SoftGripp multi-component safety sleeves according to DIN EN/IEC 60900 • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Ergonomic handle position and shape for optimum power transmission • Professional design for easy handling under permanent load • Made of special tool steel, forged, oil-hardened

Cable Cutters

Cable cutting unit in several sizes for cutting cables, in case of failure under voltage.

NSPV Multi-function solar cable stripper for stripping 2.5/4/6mm2 cables

Cable Cutters Wire Rope Cutters Rebar Cutters Steel Cutters Chain Cutters Chain Blasters Cutter for Wire of Prestressed Concrete Flat Bar Cutters Thread Cutters Nut Splitters Nibblers for Sheet Metal Cable Stripping Tools Sheat Peeling Tools

Electrical cabinets contain the electrical and electronic components of a process engineering system, a machine tool, or production equipment that is not directly located in the machine. They are manufactured by special switch cabinet builders or by the machine manufacturers themselves. To save costs, there are automation solutions that are not only worthwhile for large production series, but are also suitable for the more efficient and economical production of individual and small series. Metzner offers a unique and comprehensive system solution to reduce your expenses in switchgear construction. Depending on your requirements, different stripping and crimping machines are available, which differ in terms of design, performance and degree of automation. METZNER TRIATHLON SERIES - for precise cutting to length and one- or two-sided stripping - for crimping the ferrules (single- and double-sided) - for individual labelling of strands with different printing method

The Metzner AM 5000 range includes the flagship models for precise processing of thick cables up to 240 mm² section and 35 mm diameter. Even the basic specification models, with their high torque and powerful three-stage step motors offer the highest level of cutting and haul-off power. All models are equipped with as standard with the Metzner double-knife system that enables very varied and multi-stage processes to be performed. Moreover, with convincing operator-friendliness and long service life. Metzner AM 5000 models are also suited to processing thinner braided cables from 1.5 mm² The stripping full haul-off 1side/2nd side amount to 270-450 mm and 90-270 mm, for partial haul-off 450 mm and 270 mm. For interuption-free automatic production, a number of sensors monitor the material feeding If a material blockage occurs, the production stops automatically and the operator is informed about the cause of the fault.

The cable processing machines in the AM 3800 range are characterised by their outstanding cutting and haul-off power and their modular, robust and long-life construction for continuous use in industrial applications. These machines outstandingly combine power and versatility. Equipped with cutting power for cables up to 70 mm sectionand 20 mm diameter, they are the ideal solution for an unusually wide spectrum of applications. Depending o the processing demands, numerous knife contours and technologies are available: the patented double-knife system allows different processes to be performed in a single working pass. The circumferential rotary cut offers an exact cutting round cables with very thin or tough insulation outer cover.

Metzner has developed a fully automatic processing machine with outstanding cutting quality and great length accuracy for steel cable wires of up to 20 mm diameter. The steel cable wires are fed by a motorised feeding device in combination with a contact-free loop control. Then, program-controlled and positionally accurate marking tapes are applied to the steel cable – with a cycle time of less than two seconds. In addition, a wax printer marks all the fastening and processing points that will be required for subsequent processing. This labelling method is carried out in a continuous process. The cut is then made using a special cutting process. Precise length accuracy is achieved by a special laser measuring system. A material stacker with a storage area of up to 12 metres ensures that the steel cable wires are deposited in an orderly manner. All cut steel rope can be stored and sorted according to length to allow it to be removed at a later point.

This special Metzner development is able to process cable wires with a diameter of up to 28 mm. The cycle time for this is 2000 mm / 35 seconds. The processing steps include long slitting, sawing, circumferential cutting, stripping, brushing and depositing. An integrated ink jet printer labels the cable wires with information or markings. As the heart of the processing method, Metzner uses a newly developed stripping head that combines a rotary cut with a powerful clamping and simultaneous rotation of the material. This enables a high-precision, multi-stage radial cut through the various layers of material. Microscopic quality inspection confirms that the processing is flawless with no scratches, pressure or abrasion marks. In addition to the high machining quality, the machinery also offers special precision: both the overall length and the machining position are maintained with an accuracy of 0.2 mm. The machine can process cable wires with diameters up to 28 mm.

The specially developed production line can unwind, label, roughen, cut to length, strip, wind, bind and automatically deposit the cable wires. The material to be processed is unwound by a motorised unwinder and fed to a thermal transfer printer via a straightener. The latter prints the cable with two QR codes and a serial number. This ensures that each cable can be identified throughout the entire processing and manufacturing process and assigned to the stations which have already passed through. This traceability offers great advantages – for example in the diagnosis of faults. The cable then passes through a roughening station, which lightly roughens the material surface so that the connector overmoulding adheres better later on. An AM 3550 from Metzner Maschinenbau cuts to length and strips the cable, which is then transported to the winding station and onwards by a gripper to the binding machine. The latter winds the cable to form a cable ring.

Plastic-coated steel cablestrands are cut to length using a special shear cut module and then stripped with the cutting module of the AM3500 without the wires "jumping open".Bare steel cable wires are transported by the modified AM 3500 directly to the special cutting machine, which is coupled between the AM 3500 and the material stacker and which cuts the material to length by a thermal process. Due to the special electric welding process used here, the individual wires do not twist up during cutting, and a smooth rope start and a smooth rope end without thickening are produced. Long steel cable wires/strands are placed in a tray after processing, while short pieces of material fall down a chute into a collecting container. With the high-performance solution developed by Metzner, the customer can process different types of material in different processes. Further advantages of the machinery are high precision, high quality, an increase in productivity and lower personnel costs.

The Super Stripper 600 (SS600), strips cable from 50mm –150mm: - Steel Wired Armoured cable (SWA) - Double Steel Wired Armoured cable (DSWA) - Lead Covered cable - Rubber - Nylon - Steel Tape Length: 1700mm Width: 1200mmHeight: 1800mm Weight: 1800kgMotor: 5.5 k.w Main motor 3phase Cutting Speed: Approx 6 Meters per minute

The Super Stripper 60 (SS60), strips cable from 1mm – 30 / 50mm with bespoke plate: - Steel Wired Armour (SWA) - Twin and Earth - PVC Wired Armour - Singles - PVC - Quadrant Copper cores Length: 500mm Width: 500mm Height: 560mm Weight: 60kg Cutting Speed: Approx 26 Meters per minute. Available in Single or 3 Phase