Cable-ties - Import export

Blow guns, bleeder valves, spray guns, professional cleaning guns and special compressed air and liquid guns also belong to the RIEGLER product spectrum, as well as hand-held tyre gauges, hose clamps, sealing material and various supply units. You are always on the safe side with RIEGLER industrial adhesives, sprays and sticks.

Hook-and-loop cable ties for quickly organising and bundling cables. Cut to size and use again and again. • Hook-and-loop cable ties for tidy cable management • Quickly organise and bundle cables • Can be cut to any length • Reuse again and again • Ensure added safety at the workplace • Dimensions: 100 x 1 cm (L x W)

Capture and retention of all dusts at the source. The solution is suitable for all types of dust harmful or not (Asbestos / Lead / Silica / Dusts,…). Our Easygel Protect® cutting solutions guarantee a dusting <to 10f / L. This performance is achieved in compliance with the product instructions, in a regulatory operations and adequate staff training. SPECIFICATIONS • Capture and retention of all dusts at the source (Asbestos / Lead / Silica / Dusts,…) • Predosed and ready to use product • Transparent and nonharmful gel • Suitable for contact with drinking water BENEFITS • Cheap Solution • Suitable in cramped environments • Easy to use • Reproducible operating mode

The ideal storage temperature is around 23°C with the humidity over 50%. 2. Do not open the bag before use. Please try to finish the whole package of cable ties shortly once it's opened. Do seal the bag if there will be the remaining pieces in the bag without using at once. 3. Do not expose directly under sunlight except UV weather resistant cable ties. 4. Avoid storing cable ties next to warm objects like heaters.

Cable ties are made by high quality of Nylon 6.6. resin. The property of this material is in moisture absorbed and released. Cable ties require to be contained the moisture and packed in the sealed packaging to have optimal performance. Hence, the conditions for keeping the packaging of cable ties are very important.

Cable ties are made by high quality of Nylon 6.6. resin. The property of this material is in moisture absorbed and released. Cable ties require to be contained the moisture and packed in the sealed packaging to have optimal performance. Hence, the conditions for keeping the packaging of cable ties are very important

Cable ties are made by high quality of Nylon 6.6. resin. The property of this material is in moisture absorbed and released. Cable ties require to be contained the moisture and packed in the sealed packaging to have optimal performance. Hence, the conditions for keeping the packaging of cable ties are very important

Cable ties are made by high quality of Nylon 6.6. resin. The property of this material is in moisture absorbed and released. Cable ties require to be contained the moisture and packed in the sealed packaging to have optimal performance. Hence, the conditions for keeping the packaging of cable ties are very important.

Cable ties are made by high quality of Nylon 6.6. resin. The property of this material is in moisture absorbed and released. Cable ties require to be contained the moisture and packed in the sealed packaging to have optimal performance. Hence, the conditions for keeping the packaging of cable ties are very important.

Cable ties are made by high quality of Nylon 6.6. resin. The property of this material is in moisture absorbed and released. Cable ties require to be contained the moisture and packed in the sealed packaging to have optimal performance. Hence, the conditions for keeping the packaging of cable ties are very important.

Cable ties are made by high quality of Nylon 6.6. resin. The property of this material is in moisture absorbed and released. Cable ties require to be contained the moisture and packed in the sealed packaging to have optimal performance. Hence, the conditions for keeping the packaging of cable ties are very important

Cable ties are made by high quality of Nylon 6.6. resin. The property of this material is in moisture absorbed and released. Cable ties require to be contained the moisture and packed in the sealed packaging to have optimal performance. Hence, the conditions for keeping the packaging of cable ties are very important.

NSPV Stainless steel cable ties They have an unique ball locking with Plastic jetting mechanism that allow easily and quickly installed and High tensile strength; Non-flammability. Stainless steel cable ties are a quick effective way of securing cables.They can be used in virtually all indoor outdoor,heavy industrial and underground applications.

Category Compressed-air technology / Cable ties / Black / Typ S Product number supplier 31144202

Category Compressed-air technology / Cable ties / Black / Typ S Product number supplier 31144201

Retaining clip with metal reinforcement. For easy fixation of solar cables and plugs with cable ties.

For almost all objects and surfaces Fastening with cable ties, clamps and pinspe Opening on longitudinal or narrow side Optional rain protection flap Different colours

Belit Elektronik makes wire harnesses in various configurations, density and according to demands. 100% control of cable assemblies are done with various test equipments as a result preventing future damages and loss of time. In line with customer demands, Belit Elektronik can use one or more of materials together that hold cables such as cable ties, tubing, heat shrink tubing, cloth tape together.

Safely carries single cables Where single cables are to be routed in a group and supported firmly without the use of trunking, the Single Wire System SWS from PFLITSCH offers a better alternative to cable ties, clamps, hoses or hook and eye fastener tape. Your advantages: Bendable VA stainless steel rod for robust, flexible cable routing support Corrosion-resistant system Easy to clean, open cable routing Easy installation with VA stainless steel or plastic mounts SWS consists of bendable and yet robust 5 mm support rods with open routeing rings into which the cable is simply laid. Lines and hoses up to 16 mm can be safely accommodated – on straight sections or around corners. The support rods are attached with bolted-on plastic mounting plates or VA stainless steel mounts welded on to the machine body for example.

Cable fixation, to secure cables to aluminum profiles different versions: Cable Binding Block univeral or with customized hammer Clip Cable Binder - 1 or 2 chambers, to fix cables without the need for cable ties, can be opened and closed again Cross Cable Binder Block, with / without Velcro (bracket), to secure cables to aluminum profilesin two directions Cross Cable Binder Block D28 for Tubular Frame Profiles, to fasten cables and tubes parallel to the slot Snap-Cable-Binding, to attach of cables securely and quick and without cable ties, with strain relief different assembly: — using a hammer head nut, screw, slot nut, etc. — with Hammer, can be mounted into the slot by a quarter turn — click-in assembly — clampable Material: PA plastic / glass fiber reinforced; Plastic PE; FPM 70; electrostatical discharging Color: black other sizes, other colors on request

In many areas, stud welding is considered to be the most economic fastening method for components and is sometimes even the only technically feasible solution. Because the stud is joined with the substructure over the entire surface of the stud without any hollow areas, a high strength can be achieved. STAUFF is now using this proven principle for the installation of pipe, tube, hose and cable clamps in the Standard and Twin Series (according to DIN 3015, parts 1 and 3) with M6 mounting thread, where female threaded weld studs replace the regular weld plates; distance plates made from plastic provide the necessary spacing between the clamp bodies and the substructure. If required, the system can also be adopted for alternative fastening methods, e.g. for clamping belts, cable ties or corrugated cable protection hoses. In addition to the individual components – weld studs, distance plates, clamp bodies and metal hardware required – the company also provides the correspondingly...

wege® - the flexible cable gland system in brass, stainless steel and plastic. material: stainless steel AISI 316 Ti, sealing insert: TPS, o-ring: NBR-Oz, protection class: IP66/IP68 - 5 bar, test standard: UL 94 V0; DIN EN 45545, strain relief: DIN EN 62444 Tab. 2A, range of temperature: -50 °C to +90 °C (briefly 100 °C), short connection thread with two-piece sealing insert: M16 - M63, short connection thread with one-piece sealing insert: M12 - M63

wege® - the flexible cable gland system in brass, stainless steel and plastic. material: stainless steel AISI 316 Ti, lamellar insert: PA 6, sealing ring: CR, o-ring: NBR-Oz, protection class: IP66/IP68 - 5 bar / IP69k, test standard: UL 514B, strain relief: DIN EN 62444 Tab. 2A, range of temperature: -30 °C to +100 °C, connection thread: M12 - M63

wege® - the flexible cable gland system in brass, stainless steel and plastic. material: stainless steel AISI 316 Ti, sealing insert: TPE, o-ring: NBR-Oz, protection class: IP66/IP68 - 5 bar, strain relief: DIN EN 62444 Tab. 2A, range of temperature: -40 °C to +100 °C, short connection thread with two-piece sealing insert, M16 - M63, short connection thread with one-piece sealing insert, M12 - M63

wege® - the flexible cable gland system in brass, stainless steel and plastic. material: stainless steel AISI 316 Ti, sealing insert: VITON, o-ring: VITON, protection class: IP66/IP68 - 5 bar, strain relief: DIN EN 62444 Tab. 2A, range of temperature: -25 °C to +230 °C, short connection thread: M12 - M40

Self-locking cable ties with specially designed end for easier insertion into the lock and the Partex punched cable marking. Material Nylon 6.6 Colors Black and Natural. Also in Light blue PKB25100A. And in Light Green or Light red for PKB25200A. Temperature range For continuous use between –40°C and +85°C (–40°F and +185°F). Resistance Flame resistance in accordance with UL94V-2. Tensile strength in accordance with mil 2319OE. Good resistance to chemicals, gamma and UV radiation.

Automatic or manual cable tie fixing tool for stainless steel cable ties

Pre-punched cable marker to be mounted with cable ties. Material PVC Colors Standard colour: Yellow and White. Temperature range –30ºC to +60ºC (–22ºF to +140ºF). Resistance Flammability resistance according to UL94-V0. Resistance to chemicals according to Partex Product Test Program.

Holder for marker tags with punched holes for mounting with cable ties. Material PVC Colors Transparent. Temperature range Shape permanence from –30°C to +60°C (–22°F to +140°F). Resistance Flammability resistance according to UL94-V0. Resistance to chemicals meets Partex Product Test Program. Resistance to temperature and ageing meets norms of Partex Product Test Program. Attachment Cable tie