Blocks - Import export

NSPV Terminal block 2P-20P Features: Heavy duty, corrosion resistant screws.

PEEK material performance Polyetheretherketone (PEEK) is a high-performance, engineering thermoplastic characterized by an unusual combination of properties. These properties range from high temperature performance to mechanical strength and excellent chemical resistance. Material Grade ARKPEEK-1000: 100%PEEK ARKPEEK-CF30: 30% Carbon Fiber + 70% PEEK ARKPEEK-GF30: 30% glass fiber + 70% PEEK ARKPEEK-MOD: 10% Carbon Fiber + 10% PTFE +10% Graphite

The material is beech wood. The process is CNC milling. The finish is clean oil painting.

INNOVACERA is good at yttria stabilized zirconia. Unlike other ceramic materials, zirconia is a material with very high resistance to crack propagation. Zirconium oxide ceramics also have very high thermal expansion and are therefore often the material of choice for joining ceramic and steel. Features: > high fracture toughness > thermal expansion similar to cast iron > extremely high bending strength and tensile strength > high resistance to wear and to corrosion > low thermal conductivity Ceramic material composition: . TTZ: Magnesia partially stabilized Zirconia (ZrO2) · YTZP: Yttria partially stabilized Zirconia (ZrO2) · ZDY: Yttria fully stabilized Zirconia (ZrO2)

Silicon Nitride (Si3N4) is 60% lighter than steel but strong enough to survive some of the most demanding applications in a variety of industries. This lightweight, high-strength ceramic material is used as an alternative to stainless steel, super alloys, tungsten carbides and first-generation ceramics such as Al2O3 and ZrO2. It offers excellent thermal shock resistance and high fracture toughness, compatibility with nonferrous metal melts, and improved structural reliability compared to other ceramic materials. Silicon Nitride (Si3N4) Characteristics: 1. Good thermal shock resistance 2. Creep resistance 3. Low density 4. High fracture toughness 5. High hardness and wear resistance 6. Electrical resistivity

Alumina cearmic bar is used when conditions exclude the use of metal, either for chemical reasons or because of excessive temperatures.Their main applications are between 1000 and 1800°C. They may be in directly contact with the medium or may be used as a gas-tight inner sheath to separate the thermocouple from the actual metal protection tube. Ceramic tubes should be mounted in a hanging position above 1200°C to prevent distortion or fracture due to bending stresses. Evenhair-line cracks can lead to contamination of the thermocouple resulting in drift or failure. High purity ceramic strip provide a broad range of engineering properties: High Temperature-Superior Strength-Corrosion Resistance-Thermal & Electrical Insulation along with other specialized characteristics. -Precision Close, Tight Tolerances, -Ceramic Bar & Ceramic Strip machined to customer specifications-Prototype to Production-Intricate ceramic machining -Alumina is widely used in automotive,petro-chemical

Silicon Nitride Ceramic Bar: Silicon Nitride (Si3N4) is 60% lighter than steel but strong enough to survive some of the most demanding applications in a variety of industries. This lightweight, high-strength ceramic material is used as an alternative to stainless steel, super alloys, tungsten carbides and first-generation ceramics such as Al2O3 and ZrO2. It offers excellent thermal shock resistance and high fracture toughness, compatibility with nonferrous metal melts, and improved structural reliability compared to other ceramic materials. Silicon Nitride (Si3N4) Characteristics: >Good thermal shock resistance >Creep resistance >Low density >High fracture toughness >High hardness and wear resistance >Electrical resistivity

Machinable Glass Ceramic has a continuous use temperature of 800ºC and a peak temperature of 1000ºC. Its coefficient of thermal expansion readily matches most metals and sealing glasses.It processes good machinability and can be lathed, milled, planed, ground, bored, incised and threaded. It also has the advantages of insulation, pore-free, high/low-temperature resistant, acid and alkali resistant and thermal impact resistant.

What is a Hydraulic Manifold Blocks? Hydraulic manifold blocks is a hydraulic manifold block made of carbon steel or alloy aluminum. There are many chambers are intergraded inside the hydraulic manifold to meet various requirements in hydraulic systems or install hydraulic valve for modular valves, cartridge valves threaded installation . Hydraulic valve manifold is available to control the fluid direction, hydraulic pressure with hose fittings or adjusting flow rate with its designed chambers and valves. Hydraulic manifold block is easily to maintain, lower cost and standard replacement. Why Our Customers Choose FRIMA hydraulic Manifold blocks: We provide a wild range of manifold blocks for standard of CETOP, NFPF, DIN2430 & ISO4401 or Customized Design available. 100% high quality materials, heavy-duty carbon steel (Pressure Up to Max. 60Mpa(600bar, 8700psi) ) or alloy aluminum (Pressure Up to Max. 21Mpa(2100bar, 3045psi) ) .

Introduction: Eco-colorful metal exterior wall decoration, sound insulation/fire prevention/heat insulation, in line with 75% energy-saving standards, is widely used in tourist attractions, beaches,reservoirs, hillsides, agricultural ecological sharing farms, supporting intelligent systems. Core Technology: All-Aluminum Hidden Assembly Integrated Building, Multi-waterproof, thermal insulation, fire and moisture proof, smart home technical features:(1)The natural surface of exterior aluminium is antioxidant and corrosion resistant, and its life span is 50 years.(2) Fire protection performance: Class A fire protection; heat insulation, warm in winter and cool in summer(3) Earthquake resistance: 8 degree defense; Wind resistance: Typhoon of magnitude 12.(4) Sound insulation: in line with the sound insulation design of civil buildings, less than 40 decibels.(5)The interior adopt environmental protection new material - jute craft soft-fitting, sound insulation and heat insulation.

CNC Milling steel block

Manufacturing Process CNC Machining & Injection Molding PEEK performance Polyetheretherketone (PEEK) is a high-performance, engineering thermoplastic characterized by an unusual combination of properties. These properties range from high temperature performance to mechanical strength and excellent chemical resistance. Material Grade ARKPEEK-1000: 100%PEEK Produced from virgin polyetheretherketone resin and offers the highest toughness and impact resistance of all types. ARKPEEK-CF30: 30% Carbon Fiber + 70% PEEK Carbon fiber reinforcement lends the material a high level of rigidity and creep strength, high mechanical strength and heat conductivity values. ARKPEEK-GF30: 30% glass fiber + 70% PEEK Glass filled PEEK exhibits increased mechanical strength and high rigidity. ARKPEEK-MOD: 10% Carbon Fiber + 10% PTFE +10% Graphite high performance engineering plastic with product characteristics including excellent sliding and abrasion & wear resistance, high mechanical.

CNC machined brass block

The material is stainless steel. The process is CNC milling. The finish is anodizing.

OEM milling balck anodized aluminum block parts for industrial equipment

1000VDC PV4.0 Diode Connector Product description: Insulation material: PPE/PA Rated current(Without Diode): 30A Rated current(With Diode): 10A(Diode Rated Current 15A) Rated voltage: 1000VDC Test voltage: 6kV(50Hz,1min)  Typical contact resistance: ≤0.25 mΩ Contact material: Copper,Tin plated Degree of protection: IP67 Overvoltage category/Pollution degree: CATIII/2 Safety degree: II Flame class: UL94-V0 Insertion force/Withdrawal force: ≤50N / ≥50N Ambient temperature range: -40℃…+85℃(IEC) Upper limiting temperature: 110℃(IEC) Connecting system: Crimp connection Nut cap locking force: 1.5-1.8Nm

OEM educational alphabet puzzle IQ puzzle block jigsaw puzzles for kids

Fieldbus power conditioner applies to Foundation Fieldbus and PROFIBUS PA control system and provides power to bus-powered devices. Matched with Fieldbus terminator, it adopts uniform impedance characteristic to reproduce bus signal perfectly. NCS-BP105 Fieldbus Power Conditioner: NCS-BT105 Fieldbus Terminator: 1. Bus power supply, suitable for fieldbus conforming to IEC 61158-2 standard 2. Comply with the FF-831 bus power supply test specification 3. Support power supply redundant connection 4. Active impedance control method 5. Servo voltage output, meeting the requirements of long distance power supply