Conveyor belt connections - Import export

Stock conveyors can be produced as radial type according to the location of the facility, land conditions and customer demand. The Belt Conveyor chassis is connected to the ground from the tail module with a fixed joint. High-strength steel construction feet made to support the weight of the intermediate modules and the drive module are attached to the axle located on the wheels. These wheels are preferred as filled wheels in order to be loose-proof. The gearbox is driven by a coupled motor. It is equipped with a special brake system to prevent movement due to environmental effects during operation or stopping. The center of rotation is the fixed hinge point in the tail module. It is provided to turn clockwise and counterclockwise by the angle allowed. In this way, the stock amount is much more than a fixed stock belt conveyor.

NIR LED– Technology, Continuous InLine density measurement Description The HK8 Series are NIR (Near Infrared) LED InLine measurement devices with state–of–the–art technology. The devices are used on conveyor belt, in pipelines (connection via flowthrough measuring cell or flange) and in tanks / vessel. Through the modular construction (Sensor and evaluation unit are separate), the sensor can be installed at a difficult accessible places and the evaluation unit can be installed at a well accessible place. This ensure the easy handling. The modular construction makes the operation of the HK8– Series very easy.

NIR LED– Technology, Continuous InLine measurement of two organic components Description The HK3 Series are NIR (Near Infrared) LED InLine measurement devices with state–of–the–art technology. The devices are used on conveyor belt, in pipelines (connection via flow through measuring cell or flange) and in tanks / vessel. Through the modular construction (Sensor and evaluation unit are separate), the sensor can be installed at a different accessible places and the evaluation unit can be installed at a well accessible place. This ensure the easy handling. The modular construction makes the operation of the HK3– Series very easy.

PRODUCT: -Lasagne with respective layers of pasta, bolognese, béchamel and cheese on top. -Two product sizes. MACHINE CHARACTERISTICS: -Three distinct zones connected by conveyor belts: oCutting area for the pasta sheet, placed by the operators in the moulds. oDosing area with five multi-purpose dosing machines, alternately positioned to apply the different layers of the lasagne. Volumetric dosing, equipped with servomotor for a homogeneous dosage. o Spun cheese dosing area. -From the control panel and by means of a touch screen we configure the speeds and accelerations of each belt to comply with the desired production. ADVANTAGES -Automated production for high volume processing. -All the processes are completed in a reduced space. -The entire line is easily disassembled for easy and effective cleaning, and its components are suitable for cleaning with pressurised water.

Product handling for randomly fed parts requires a recognition of the position and orientation of each single part. Depending on the application, vision sensors with integrated processor or networked cameras with centralized processor can be used. Demanding algorithms for inspection, sorting and grading require the recognition of additional product characteristics for each single part. Critical and validated applications in the medical, pharmaceutical or semiconductor industry may even require multiple inspections or advanced data matching with an external data base. VELTRU specifies a simple minimal standard interface for machine vision to allow integrating any vision system. This interface makes use of the existing calibration routines to determine the sensor location relative to the robot and to communicate product location and orientation on a conveyor belt. The VELTRU V10 Vision Connection is a tight integration for the Matrox Design Assistant, a flow chart based configuration to

PU timing belts with easy joint as strong as a welded joint The easy joint timing belt fastener is the perfect solution, for a quick and easy mechanical endless connection of PU timing belts. Assemble without disassembling, without stopping your production line Replace your belts in few minutes without disassemble your hoods, pulleys, axis. Reduce your production downtimes. The method of mechanical assembly and fastening system easy joint offers unique solutions for easy and fast repairs of power transmission belts or conveyor belts. Pitches: H / T10 / AT10 / T20 / AT20 / 8M / 14M Standard: Polyurethane 90° Shore A grey Versions: Standard, PAZ, PAR Cords: reinforced with a Polymercord around the Pin in each tooth joint, arranged in parallel Width: from 10 to 150mm, (wide belts possible on request)

Our endless turned round belts are wound either out of one homogeneous strand or one cord and spliced endlessly without thickening. For special applications, it is possible to vulcanize the inner splice or to make a special splice based on our in-house engineering methods. This increases the tensile strength by up to 60%. In elastic types, the core is welded. In view of their special structure, twisted round belts exhibit very quiet running properties, are extremely flexible and, thus, make possible very small minimum pulley diameters of 3x belt diameter. For several types, speed up to 70,000 rpm is possible; however, the speed of 60m/s should not be exceeded. Elastic types: PU, Vulkollan Semi-elastic types: PA.6, Set-Polyester, Nylon, HE Types with limited extensibility: Polyester, Nomex, Nomex-PTFE, Polyester-PTFE, Kevlar/Twaron, PA.6 anti-static, PBO

Endless extruded round belts Our endless extruded round belts are ideal for low power requirements. They are elastic power transmission elements that do not need cost-intensive tensioning devices. In view of the special production process, they do not have any welding seams or terminal connections and run very smoothly. Moreover, they allow a minimum pulley diameter starting from 5.5 x belt diameter. Our types E80, V75, C70 and P82 are made of specially selected and dynamically tough materials. In addition, type E80 also is antistatic to a limited extent and has a resistance value of about 106 Ohm; thus, it is excellent for use in electronic devices and chip production. Available diameters: 1.8mm - 7mm Available lengths: 40mm – 1,610mm Temperature resistance: -20°C - +160°C Coefficient of friction: 0.35µ - 0.9µ* Maximum tension: >100N

With an adjustable incline, the ascending conveyor belt adjusts to the height differences between the upstream and downstream machines

PU V-belts run individually or alongside one another and convey products on slightly ascending or descending conveying systems without allowing the products being transported, e.g. boxes, tiles, glass slabs, cardboard articles etc., to slip. In addition, PU V-belts are used for driving live roller conveyors. Standard stock program: 75° Sh.A red 80° Sh.A transparent, FDA 80° Sh.A sky-blue, FDA 85° Sh.A green 90° Sh.A white Profiles 6x4 / 8x5 / 10x6 / 13x8 / 17x11 / 22x14 Smooth or notched

Hollow core belts for nipple connections when quick and easy installation is needed. Standard stock program: 75° Sh.A red, smooth 80° Sh.A sky-blue, smooth, FDA 85° Sh.A green, smooth Available diameters: 4.8mm - 15mm Available lengths: starting from 110mm Available hardness: 75° Sh.A – 85° Sh.D Temperature resistance: -30°C - +70°C Coefficient of friction: 0.3µ - 0.7µ

We have a complete range of polyurethane round belts for conveying and power transmission applications. PU round belts, extruded in open lengths, are homogeneous round profiles that can be welded for use as high-quality power transmission and conveying elements. Our stock mainly comprises solid profiles with a smooth or slightly roughened surface and hollow profiles for nipple connections. Several types have FDA/USDA approval and comply with EU Directive 2007/19/EC. Although we generally produce in open lengths, we can also produce all belts according to your specifications. Our round belts convey a wide range of products such as foodstuffs, glass, roof tiles, PC boards and many more. The standard range of round belts is rounded off with aramid, polyester or glass-fiber reinforcements. If an appropriate quantity is purchased, we also produce special types with PES or aramid reinforcements.

Polyester felt belt antistatic

Polyester felt belt antistatic

Polyester felt belt antistatic

Silicone conveyor belt 2-ply white

Silicone conveyor belt 1-ply light blue

Overview to the technical datas of KEIPER conveyor belt product range RAPID

PU conveyor belt 2-ply white, structure

PU conveyor belt 2-ply light blue

PU conveyor belt 2-ply white

PU conveyor belt 2-ply light blue, fabric

PU conveyor belt 2-ply white, fabric

PU conveyor belt 1-ply light blue, structure

PU conveyor belt 1-ply white, structure

PU conveyor belt 1-ply light blue

PU conveyor belt 1-ply white

PU conveyor belt 1-ply white

PU conveyor belt 1-ply white