Copper sheets and bands - Import export

Product Name: Brass Strips Coil Foil for Decoration Application: Electronic, telecommunications Width: 3mm-1220mm Material: Brass Grade: Brass Coil Cu (Min): 64.0-68.0% Model Number: C2680,C2680,C2700.etc. Place of Origin:  China Processing Service: Bending, Welding, Decoiling, Cutting, Punching Shape: Strip Coil Roll Temper: O, 1/4H, 1/2H, 3/4H, H, EH, SH Alloy brand: C2680, C2600, etc Standard: JIS ASTM DIN EN ISO Surface: Mill,Polish,Bright,Hair line,Brushed,etc. Package Type: Standard export seaworthy package,or as required. Payment term: T/T,L/C etc. Port of shipment:Xiamen,China Lead time:15-30days

hemical Composition: Total concentration of all impurities ≤ 65ppm (typical value ≤ 25ppm). Copper obtained by the difference between 100% and total impurities. ELEMENT SPECIFIED TYPICAL Se < 1.0 ppm < 1.0 ppm Te < 1.0 ppm < 0.5 ppm Bi < 0.5 ppm 0.20 ppm Sb < 1.0 ppm < 1.0 ppm As < 3.0 ppm 1.2 ppm Pb < 1.0 ppm 0.3 ppm Fe < 5.0 ppm 2.8 ppm S < 10.0 ppm 4.5 ppm Ni < 5.0 ppm < 1.0 ppm Sn < 1.0 ppm < 0.5 ppm Ag < 12.0 ppm 8.0 ppm

BARE MATERIAL The strips must be clean and free of detrimental defects, which must be specified by agreement between the customer and the supplier when requesting the quote and in the order. Normally, a small residual layer of lubricant is left on cold-rolled products, which is authorised unless otherwise specified. ROUGHNESS EN 1654 This must be agreed between the customer and the supplier when requesting the quote and confirming the order. SURFACE CONDITION EN 13599 The strips must be clean and free of detrimental defects, which must be specified by agreement between the customer and the supplier in the request for quotes and in the order. Normally, a small residual layer of lubricant is left on cold-drawn products, and this is acceptable unless otherwise specified. Discolouration is acceptable, provided that it is not detrimental to the use of the product. TIN COATINGS Tin coatings for strips and copper strips and copper alloys: Electrolytic s/EN 14436 and Hot dip s/EN 13148

BARE MATERIAL The strips must be clean and free of detrimental defects, which must be specified by agreement between the customer and the supplier when requesting the quote and in the order. Normally, a small residual layer of lubricant is left on cold-rolled products, which is authorised unless otherwise specified. ROUGHNESS EN 1654 This must be agreed between the customer and the supplier when requesting the quote and confirming the order. SURFACE CONDITION EN 13599 The strips must be clean and free of detrimental defects, which must be specified by agreement between the customer and the supplier in the request for quotes and in the order. Normally, a small residual layer of lubricant is left on cold-drawn products, and this is acceptable unless otherwise specified. Discolouration is acceptable, provided that it is not detrimental to the use of the product. TIN COATINGS Tin coatings for strips and copper strips and copper alloys: Electrolytic s/EN 14436 and Hot dip s/EN 13148

BARE MATERIAL The strips must be clean and free of detrimental defects, which must be specified by agreement between the customer and the supplier when requesting the quote and in the order. Normally, a small residual layer of lubricant is left on cold-rolled products, which is authorised unless otherwise specified. ROUGHNESS EN 1654 This must be agreed between the customer and the supplier when requesting the quote and confirming the order. SURFACE CONDITION EN 13599 The strips must be clean and free of detrimental defects, which must be specified by agreement between the customer and the supplier in the request for quotes and in the order. Normally, a small residual layer of lubricant is left on cold-drawn products, and this is acceptable unless otherwise specified. Discolouration is acceptable, provided that it is not detrimental to the use of the product. TIN COATINGS Tin coatings for strips and copper strips and copper alloys: Electrolytic s/EN 14436 and Hot dip s/EN 13148

BARE MATERIAL The strips must be clean and free of detrimental defects, which must be specified by agreement between the customer and the supplier when requesting the quote and in the order. Normally, a small residual layer of lubricant is left on cold-rolled products, which is authorised unless otherwise specified. ROUGHNESS EN 1654 This must be agreed between the customer and the supplier when requesting the quote and confirming the order. SURFACE CONDITION EN 13599 The strips must be clean and free of detrimental defects, which must be specified by agreement between the customer and the supplier in the request for quotes and in the order. Normally, a small residual layer of lubricant is left on cold-drawn products, and this is acceptable unless otherwise specified. Discolouration is acceptable, provided that it is not detrimental to the use of the product. TIN COATINGS Tin coatings for strips and copper strips and copper alloys: Electrolytic s/EN 14436 and Hot dip s/EN 13148

BARE MATERIAL The strips must be clean and free of detrimental defects, which must be specified by agreement between the customer and the supplier when requesting the quote and in the order. Normally, a small residual layer of lubricant is left on cold-rolled products, which is authorised unless otherwise specified. ROUGHNESS EN 1654 This must be agreed between the customer and the supplier when requesting the quote and confirming the order. SURFACE CONDITION EN 13599 The strips must be clean and free of detrimental defects, which must be specified by agreement between the customer and the supplier in the request for quotes and in the order. Normally, a small residual layer of lubricant is left on cold-drawn products, and this is acceptable unless otherwise specified. Discolouration is acceptable, provided that it is not detrimental to the use of the product. TIN COATINGS Tin coatings for strips and copper strips and copper alloys: Electrolytic s/EN 14436 and Hot dip s/EN 13148

BARE MATERIAL The strips must be clean and free of detrimental defects, which must be specified by agreement between the customer and the supplier when requesting the quote and in the order. Normally, a small residual layer of lubricant is left on cold-rolled products, which is authorised unless otherwise specified. ROUGHNESS EN 1654 This must be agreed between the customer and the supplier when requesting the quote and confirming the order. SURFACE CONDITION EN 13599 The strips must be clean and free of detrimental defects, which must be specified by agreement between the customer and the supplier in the request for quotes and in the order. Normally, a small residual layer of lubricant is left on cold-drawn products, and this is acceptable unless otherwise specified. Discolouration is acceptable, provided that it is not detrimental to the use of the product. TIN COATINGS Tin coatings for strips and copper strips and copper alloys: Electrolytic s/EN 14436 and Hot dip s/EN 13148

BARE MATERIAL The strips must be clean and free of detrimental defects, which must be specified by agreement between the customer and the supplier when requesting the quote and in the order. Normally, a small residual layer of lubricant is left on cold-rolled products, which is authorised unless otherwise specified. ROUGHNESS EN 1654 This must be agreed between the customer and the supplier when requesting the quote and confirming the order. SURFACE CONDITION EN 13599 The strips must be clean and free of detrimental defects, which must be specified by agreement between the customer and the supplier in the request for quotes and in the order. Normally, a small residual layer of lubricant is left on cold-drawn products, and this is acceptable unless otherwise specified. Discolouration is acceptable, provided that it is not detrimental to the use of the product. TIN COATINGS Tin coatings for strips and copper strips and copper alloys: Electrolytic s/EN 14436 and Hot dip s/EN 13148

Copper Strips are manufactured from highly conductive and thin thickness. They are windly used in automotive industry; radiators, cable industry, electronic and electrical industries; decorative components and Building industry: roofings.etc. Coper Strips are ideally used in applications where the salt content in the soil is very high, with a width of 5mm to 160mm, Thickness of 0,10mm to 10mm. Copper strips are produced, hot and cold rolling , by extruded OF busbars and they are accordıng with TS EN 1652, DIN EN 1652, DIN EN 13599 also EN 13601

We offer wide range of copper sheets that are made with accuracy to suit the client’s specification. We manufacture these copper sheets soft, hard and semi hard optionally for use in electrical industry, Roofing and for other applications.They are produced that Copper fluid is casting to the moulds and follows to the rolling machines, to be Copper sheets. They are according with TS EN 1652, DIN EN 13599. General Properties Material with minimum copper content 99.95%. Width : 1000 mm Length : 2000 mm Thickness : 0.40 mm to 4 mm

We offer a wide range of rods, which are used for electroplating, switchgear, ship building and power generating equipment, as they are high-conductivity. On the other hand, they are widely used as radiator in electrical product, as its high- thermal conduction. They are produced that copper fluid is casting to the billet moulds and follows to the extrusion press, after that annealed rods are drawn, to be copper rods, 2000 mm to 6000 mm length, 10 mm to 175 mm diameter and they are according with TSE 435, DIN EN 12163 and DIN EN 13601. General properties material with minimum copper content 99.95%

Copper Strips are manufactured from highly conductive and thin thickness. they offer great resistance to corrosion.They are widly used in automotive industry; radiators, cable industry, electronic and electrical inustries; decorative components and Building inustry: roofings.etc. Coper Strips are ideally used in applications where the salt content in the soil is very high, with a width of 10mm to 160mm, Thickness of 0,20mm to 6mm. Copper strips are produced, hot and cold rolling , by extruded busbars and they are accordıng with TS EN 1652, DIN EN 1652, DIN EN 13599

We offer wide range of copper sheets that are made with accuracy to suit the client’s specification. We manufacture these copper sheets soft, hard and semi hard optionally for use in electrical industry, Roofing and for other applications.They are produced that Copper fluid is casting to the moulds and follows to the rolling machines, to be Copper sheets. They are according with TS EN 1652, DIN EN 13599. General Properties Material with minimum copper content 99.95%.

All size NAB castings for Valves. Total capacity of 15 To enables to accomodate almost any aluminium bronze project

Main products: High-precision tin phosphor bronze strips, copper strips, brass strips and white zinc copper strips Product characteristics: Good yield strength and fatigue strength, good elastic properties, excellent processing and bending properties, good ductility, durability and corrosion resistance Applications: Electrical and electronic devices, communication technology, electrical network, hardware, construction industry, home appliances Production capacity: 104,000 tons Honorary titles: Zhejiang Famous Brand Product, China's Top 5 Copper Strip Company

Arslan Metal offers Sheet Lead for many applications that include Radiation Shielding - laboratories, hospitals, dental offices and veterinary clinics, Construction – flat and pitched roofing, mosques roofing, clading, flashing and waterproofing, gutters, parapets, Corrosion Protection - acid Storage and handling - autoclaves movable lead screens sound barriers and sound proofing, tank lining vibration absorbers and all lead detail work. They are produced that Lead fluid is casting to the moulds and follows to the rolling machines,to be lead sheets.

Any device is only as reliable as the sum of its components. With more than fifteen years of experience in manufacturing tuned and detuned filter reactors for power factor correction, we are now offering our range of line reactors for application in power electronics. Same as with our capacitors, we focus on minimized power losses and maximum durability of the reactor – optimized for your application. Made of high-class transformer sheets and copper wire or aluminium band. Vacuum-impregnated with environmentally friendly, low-styrole resin for long operating life, high voltage strength and low noise levels. Standard terminals: copper terminal lugs, optional with screw-terminal blocks or cables. Integrated reversible thermal switch for monitoring of the reactor and control of external disconnection in case of overheating. Our standard range covers 400V 50Hz up to 300A per phase. Other values are available on request.

Soundproofing is becoming ever more important because of the noise polluting our environment. Sheet lead is one of the basic materials for acoustic control systems, lead is an extremely efficient barrier material by itself or fastened to studs as part of a wall. Arslan Metal’s lead sheet products are widely used in different applications for sound proofing.

Arslan Metal offers Sheet Lead for many applications that include Radiation Shielding - laboratories, hospitals, dental offices and veterinary clinics, Construction – flat and pitched roofing, mosques roofing, clading, flashing and waterproofing, gutters, parapets, Corrosion Protection - acid Storage and handling - autoclaves movable lead screens sound barriers and sound proofing, tank lining vibration absorbers and all lead detail work. They are produced that Lead fluid is casting to the moulds and follows to the rolling machines,to be lead sheets.

It is a well-known fact that X-Rays, unless properly controlled and directed, are very harmful to the human body and have even been known to cause death. As a consequence, various materials are being utilizes for the insulating of the X-Ray tubes. There are two general methods of securing this protection. One is by the use of protective plasters, such as barium sulphate plaster, and the other is the use of sheet lead. In the use of plaster there are couple of disadvantages. But sheet lead has none of these disadvantages and is consequently considered the best possible protection. The Advisory Committee on X-Ray Protection of the International Congress of Radiology specifically warns against the use of protective plasters in installations of over 75 kV.The thickness of lead required varies with the power of the X-Ray apparatus.

Available as rings, bands , stripes or coils for all OEM specifications i.e Samp, Henrich Niehoff..-Nickel (99,2%) Copper / Elmedur in a highly demanding quality cut to exact diameter with precisely cut ends or over lapping ends, exact fit , even roundness, fast and easy exchange , reducing costs due to the very high material

Sorted copper wire scrap & high-purity cathodes. Competitive prices, fast EU delivery. Reliable partner for your copper needs.