Deep groove ball bearings - Import export

The use of high-precision radial groove ball bearings is especially recommended when axial forces are supported in two directions, but the installation space makes the use of a spindle bearing pair impossible; plus when the best-possible guide for rotating components is needed, but the RPM requirements are less important. Depending upon the load capability and the installation space available, GMN provides deep groove ball bearings in sizes 60 and 62 as per DIN 625. A large selection of various cages, lubricants and covers make it possible to adapt GMN deep groove ball bearings to any application.

Deep groove ball bearings, bearing, ball bearing

Load capacity of up to 60 kg possible

Plastic ball bearing featuring a polyacetal (POM) outer race, and steel inner race. Its main applications are: office furniture, furniture, vending machines, and refrigerators. There are 3 different types of D-Series Bearings, each serving a different use of application: Hole, Screw, and Riveting bearings. In addition, there are 6 different types of outer housing shapes, which can be seen below. Dimensions range from φ9 to φ48, and load capacity ranges from 2kgf (4.40 lb) to 20kgf (44.0lb).

Using the D-series as a foundation, the K-series was developed as a more precision focused version of the D-series. The K-series offers closer tolerances and better accuracy. The outer races can be custom designed for your application. The assembly can include timing pulleys, sprockets, and gears that may be required in sophisticated appliances such as copy machines, printers, and vending machines.

Special bearings for ･ Chemical resistance ･ Heat resistance ･ Corrosion resistance ･ Anti-static

Load capacity of up to 80 kg possible Allowable rotation speed 300+ rpm

Load capacity of up to 80 kg possible

Single row deep groove ball bearings (Typ: 6000/6200/6300) Double row deep groove ball bearings (Typ: 4200) RDEEP GROOVE BALL BEARING Single row deep groove ball bearings (Type: 6000/6200/6300) Double row deep groove ball bearings (Type 4200) Deep groove ball bearings are wide ranging, non-separable bearings with solid outer rings, inner rings and bearing housings. These simply built products, steadfast in operation and maintenance friendly, are available as single and double row as well as sealed and open. In technical production, open bearings can have a recess on the outer ring for seals or cover rings. Due to their low moment of friction, deep groove ball bearings are suited to high speeds. Single and double row ball bearings are the most utilised anti-friction bearing. They are simple in construction, non-separable, suited to high speeds and unsusceptible in operation and maintenance. Narrow lubrication between running grooves and balls.

Deep groove ball bearings are the most commonly used type of bearing. Coming in many versions, varieties and dimensions, they are particularly versatile and can be used in a wide range of applications. They can withstand both radial and axial loads in both directions, even at high speed. They are especially suitable for all situations where high speed and low power loss are required. Features of deep groove ball bearings: ideal for high and very high speeds able to bear medium radial and axial loads in one or both directions easy to assemble, with minimal maintenance requirements Series: 600, 6000, 6200, 6300, 6400, 1600 Thin ring: 61800, 61900 APPLICATIONS: Earth Moving Machinery Electrical Motors and Gearboxes Iron and Steel Industry Agricultural Machinery Oil Industry Papermaking Machinery Wind Turbines Railways Semiconductors General mechanics Industrial Transmissions Pumps and Compressors Medical devices Food Processing Machinery

Although single row radial bearings are designed primarily to support a radial load, they perform relatively well under thrust or combined radial and thrust load with the added advantage of low noise, vibration, and drag torque. The internal architecture and cage selection can be designed to meet the specific needs of the application, from high speed to high load. Thin section deep groove ball bearings have a small radial cross-sectional thickness that are used when compactness is required. We manufacture deep groove ball bearings with a minimum bore diameter of 3 mm to a maximum outer diameter of 47 mm.

Inner ring, outer ring and rolling elements, bearing steel. Cage sheet steel. Labyrinth seal sheet steel. Lip seal NBR. Version 2Z = sealed both sides with noncontact labyrinth seals. 2RSR = sealed both sides with contact lip seals. Note Deep groove ball bearings accept high radial and axial loads. Axial loads are absorbed in both directions. The versions 2Z and 2RSR are lubricated for life with a high quality grease. The main dimensions of the deep groove ball bearings conform to DIN 6251. Dimensional and running tolerances correspond to tolerance class PN acc. to DIN 620. The radial internal clearance corresponds to the clearance CN acc. to DIN 6204. These tolerance classes are standard and well suited for most applications.

Based on our many years of experience in developing and manufacturing high-quality machine components, GMN has specialized in the area of high-precision ball bearings as well as the production of high-performance and long-lived deep groove and spindle ball bearings to meet – or even exceed – the highest precision classes P4 and ABEC 7. Certification under international standards ensures the highest precision in the development and manufacturing of GMN ball bearings and guarantees constant, outstanding qualities related to speed suitability, stability and longevity. The broad product range includes a large selection of standard solutions as well as requirements-tailored special designs.

The axis height of the spindle bearings matches the fixed bearing unit 2407801. The floating bearing units consist of a housing with deep groove ball bearing, which adapts axially to the linear expansion of the spindle.

KIS deep groove ball bearings are characterised by their high load carrying capacity and speed stability. Depending on the requirements of your application, they are available in different variants and in both radial and axial design. Our single row deep groove ball bearings are available in open and sealed designs. Open bearings are maintenance-free, while sealed bearings offer better corrosion protection. Single row deep groove ball bearings can support both radial and axial forces. Our double row deep groove ball bearings feature a higher radial load carrying capacity. They are used when the radial load carrying capacity of single row deep groove ball bearings is not sufficient. Axial deep groove ball bearings are suitable for supporting particularly high axial loads. They are available in both single and double direction. Single direction thrust ball bearings can only support axial forces, while double direction thrust ball bearings can support both radial and axial forces.

Deep groove ball bearing W 6003-2RS1 stainless steel with contact seal Key Features: Made from stainless steel for superior corrosion and chemical resistance. Seals on both sides maintain lubricant and prevent contaminants from entering, ideal for challenging environments. Low friction, optimized for low noise and vibration, allows rotational speeds of up to 13,000 r/min. Supports radial and axial loads in both directions. Dimensions: Hole Diameter: 17 mm. External Diameter: 35 mm. Width: 10 mm. Performance: Basic dynamic load of 4.94 kN and basic static load of 3.15 kN. No need for relubrication. Cage: Laminated metal, providing durability and support in high-speed operations. Properties and Sealing: Single row design with CN radial internal clearance and Normal tolerance class. Contact seal on both sides with grease lubrication.

Deep Groove Ball Bearing 6005-2RSH SKF Main Features: This high-performance bearing, made from bearing steel, features superior resistance with contact sealing on both sides, which prevents contaminants from entering and retains lubricant. Designed to support radial and axial loads in both directions, with low friction, optimized to reduce noise and vibration, allowing a high rotational speed. Dimensions: Hole Diameter: 25 mm. External Diameter: 47 mm. Width: 12 mm. Performance: Basic dynamic load of 11.9 kN and basic static load of 6.55 kN, with a limit speed of 9,500 r/min. Properties: Single row design with CN radial internal clearance, tolerance class Normal, rolled metal cage, no lubrication required. Product Detai

Pallet dolly (Tugger trains) have a robust welded steel construction and are equipped with 4 catch corners. The surface of the trolleys is galvanized or powder-coated, has permanent surface protection and is impact and scratch resistant Swivel and fixed castors: polyurethane tires, hubs with deep groove ball bearings, brakes on the swivel castors, in accordance with the European standard EN 1757-3. Housing galvanized. Standard wheels for medium loads. Quiet running, spring-loaded drawbar.

Pallet dolly (Tugger trains) have a robust welded steel construction and are equipped with 4 catch corners. The surface of the trolleys is galvanized or powder-coated, has permanent surface protection and is impact and scratch resistant Swivel and fixed castors: polyurethane tires, hubs with deep groove ball bearings, brakes on the swivel castors, in accordance with the European standard EN 1757-3. Housing galvanized. Standard wheels for medium loads. Quiet running, spring-loaded drawbar.

In the mining sector severe operating and environmental conditions require extremely robust bearings. Bearings for mining industry are used for bucket wheel excavators, draglines, conveyor belts, trucks, stackers, transport equipment, loaders, longwall shearers and hoists. The mining industries use many types of bearings: roller bearings, deep groove ball bearings, spherical roller bearings and tapered roller bearings. DEEP GROOVE BALL BEARINGS The mining industries use belt conveyors for transporting bulk materials. The conveyors run on idlers and a lot of them extend over many kilometers; thus the number of idlers needed may be very large. The deep groove bearings (design 2ZR and 2RS) are sealed by dust shields and seals on both sides, and filled with grease for a long service life. SPHERICAL ROLLER BEARINGS In the mining sector severe operating and environmental conditions require extremely robust bearings. Mining machinery faces some of the toughest terrains.

Our PLQE is uncomplicated and powerful. It can be connected directly to your installation without the need for an intermediate flange. The large deep groove ball bearing at the output can absorb large axial and radial forces. In the process, only little heat is generated, so reliable operations are assured even in complex production cycles.

In addition to precision deep groove ball bearings, ROS also employs self-aligning ball bearings and spherical roller bearings for its heavy load rollers with internal bearings. In addition to a selection of different tube and shaft designs, powered rollers are also available for use.

In addition to precision deep groove ball bearings, ROS also employs self-aligning ball bearings and spherical roller bearings for its heavy load rollers with internal bearings. In addition to a selection of different tube and shaft designs, powered rollers are also available for use.

Spare parts for conveyor systems Bearing inserts from — galvanized sheet steel (with oiled ball bearing, in antistatic design) — Plastic, grey (polypropylene), with black plastic seal (polyamide) and stainless steel balls — Plastic, black (polypropylene), with black plastic seal Labyrinth (polypropylene) and RS deep groove ball bearing (in antistatic design) — Plastic, blue (polypropylene) with blue (polypropylene) and double stainless steel ball row Pipe diameter: — 20x1.5 mm — 30x1.5 mm — 30x2 mm — 40x1.5 mm — 40x2.3 mm — 50x1.5 mm — 50x2.8 mm — 60x2 mm Axle diameter: — 6 mm — 8mm — 10mm — 12mm