Digital gauges - Import export

The LEO3 digital manometers also output the pressure values as an analog signal for display purposes and have an RS485 interface for integration in bus systems and communication with computers. The current 4...20 mA measured value is shown on the display at the same time as the pressure value. The minimum or maximum value since the last reset can also be displayed at the touch of a button. Power is supplied directly via the 4...20 mA circuit.

The compact ECO2-Ei digital manometers are budget-friendly and provide a good resolution. The minimum or maximum value since the last reset can be displayed at the same time as the current pressure value in a wide variety of units of pressure. The swivel adapter allows the device to be optimally positioned. Power is supplied by a conventional CR2430 coin cell battery (provided). Intrinsically safe – suitable for use in explosive atmospheres.

The compact LEO2-Ei digital manometers are budget-friendly and provide high accuracy. The minimum or maximum value since the last reset can be displayed at the same time as the current pressure value in a wide variety of units of pressure. The swivel adapter allows the device to be optimally positioned. Power is supplied by a conventional CR2430 coin cell battery (provided). Intrinsically safe – suitable for use in explosive atmospheres.

The LEO1-Ei digital manometers have a measuring interval of 5000 individual measurements per second, which allows them to record fast pressure peaks. The minimum or maximum value since the last reset can be displayed at the same time as the current pressure value in a wide variety of units of pressure. Power is supplied by a conventional CR2430 coin cell battery (provided). Intrinsically safe – suitable for use in explosive atmospheres.

The high-accuracy LEO-Record-Ei digital manometers can record pressure and temperature autonomously for long periods thanks to their memory function. The data logger can be connected to a computer via the RS485 interface for configuration and for reading out the recorded data. The current pressure value can be displayed in a wide variety of units of pressure. Power is supplied by a high-quality 3,6 V lithium battery. Intrinsically safe – suitable for use in explosive atmospheres.

The high precision of the LEX1-Ei digital manometers makes them ideally suited to calibration and test applications. The minimum or maximum value since the last reset can be displayed at the same time as the current pressure value in a wide variety of units of pressure. Power is supplied by a conventional CR2430 coin cell battery (provided). Intrinsically safe – suitable for use in explosive atmospheres.

The compact ECO2 digital manometers are budget-friendly and provide a good resolution. The minimum or maximum value since the last reset can be displayed at the same time as the current pressure value in a wide variety of units of pressure. The swivel adapter allows the device to be optimally positioned. Power is supplied by a conventional CR2430 coin cell battery (provided).

The compact LEO2 digital manometers are budget-friendly and provide high accuracy. The minimum or maximum value since the last reset can be displayed at the same time as the current pressure value in a wide variety of units of pressure. The swivel adapter allows the device to be optimally positioned. Power is supplied by a conventional CR2430 coin cell battery (provided).

The LEO1 digital manometers have a measuring interval of 5000 individual measurements per second, which allows them to record fast pressure peaks. The minimum or maximum value since the last reset can be displayed at the same time as the current pressure value in a wide variety of units of pressure. Power is supplied by a conventional CR2430 coin cell battery (provided).

The high precision of the LEX1 digital manometers makes them ideally suited to calibration and test applications. The minimum or maximum value since the last reset can be displayed at the same time as the current pressure value in a wide variety of units of pressure. Power is supplied by a conventional CR2430 coin cell battery (provided).

1 or 2 channel multifunctional display for DT series probes. Perfectly suited for quick and easy measured value evaluation in assembly and production plants. The display has a comparator function with switching outputs for connection to the PLC for fast pass/fail evaluation. The displays can be easily installed in the front panel Measuring modes: ACTUAL, MAX, MIN, P_P Addition and subtraction function: A+B, A-B Comparison function: setting of upper/lower limits; GO / NO GO via NPN open collector output Start/hold function

QE QUALITY 2-Way digital manifold gauges are extremely advanced yet user friendly. This manifold offers a large easy to read lCD screen which displays pressure, saturated temperature, ambient temperature, superheat and subcoolirg temperature for 82 different refrigerants. To ensure durability and performance, the manifold gauges are protected oy rugged ruboer boots.Manifold Set Specs: 82 different refrigerant options High & Low Quick Coupler Set with Adapters Hose Adapters (S/16" Male to 1/4' Female) 1/4' Access Valve & connection on body Sight Glass Easy Grip Handles Carrying Case

Spare Dial Gauges are available for all Digital Thickness Gauges. They will be supplied without contact point and without lifting device. For Digital Thickness Gauges the data cables illustrated below are available. Data cable DCMD 232 This Opto_RS cable allows a fast connection of Digital Dial Gauges via a RS 232 data output directly to a PC or to other peripheral devices. Standard version 2 m long, maximum length 15 m optionally available. SUB-D jack 9 – pin / F. Cable for data output for series MD / FMD XX TB or FMD XX TA. Data cable DCMV 232 In standard version 2 m long. SUB-D jack 9 – pin.

Digital differential pressure gauges and controls are the natural evolution from mechanical differential pressure gauges and are now being used to replace this older technology. Digital differential pressure gauges and controls take advantage of the technology available to offer more features, better performance and in general a more accurate and complete product compared to mechanical differential pressure gauges. Sensocon is the market leader in digital differential pressure gauges and has the most complete offering of products currently available. Our products range from low cost digital differential pressure gauges that are ideal for upgrading existing mechanical gauges to digital differential pressure controllers with relay outputs to all stainless steel room pressure monitors.

This Stand converts the Dial Thickness Gauges e.g. K50, K100, J50, J100 and F1101/30 as well as the respective digital models, designed for hand-held use, to table models. Retrofitting this Stand to models already in use is possible.

The large display has a good visual perception for easy reading of the measuring result. The use of aluminium for the body of the instruments makes them light and easy to handle. The Digital Thickness Gauges are switchable from metric reading to inch reading.

The base is dull chromed, hardened and lapped. The metal collet attachment guarantees reliable fixing of the dial gauge. An additional internal hexagon screw makes exchanging the dial gauge easier. Each of our mechanical dial depth gauges is equipped with the 10 mm long special contact point 573/21.

General Information The STAUFF SPG-DIGI digital pressure gauges are designed for digital measurement and display of pressure in hydraulic systems, especially for oils, lubricants and water. Current measured values as well as min and max values can be displayed with a precision of 0.5% of the full scale value. The SPG-DIGI is optionally available in the USB version, equipped with an internal data memory. A measurement started on the measuring device is automatically stored in the internal data memory in the universal .csv file format. The measurement data can then be transferred to the PC using the supplied mini USB cable. The device shows up on the PC as a USB data storage medium, so that no additional software is required for transferring the data. This allows easy export of the data, e.g. into Microsoft Excel®. The measurement data are stored in the internal memory with a resolution of up to 100 ms for short measurements and a pressure peak monitoring of 10 ms. Up to ten...

The Series A2 digital differential pressure gauge is a patented microprocessor based digital pressure gage for positive, negative, and differential measurement designed to be a direct replacement for mechanical gauges. The Series A2 differential pressure gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the A2 is also available with 0.5% or 0.25% accuracy. The A2 digital differential pressure gauge also has an optional 4-20 mA output for applications requiring an output signal. The A2 features a bright ½" LED display and process arch, which gives the gauge improved readability and precision. The A2 digital differential pressure gauges also feature 5 user selectable engineering units including in. w.c., mm w.c., cm w.c., kPa, and Pa. The Series A2 offers an improved look, and performance compare to mechanical gauges.

The Series A1 Digital Differential Pressure Gauge is a patented microprocessor based digital pressure gage for positive, negative, and differential measurement designed to be a direct replacement for mechanical gauges. The Series A1 digital differential pressure gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the A1 is also available with 0.5% or 0.25% accuracy. The A1 pressure gauge also has an optional 4-20 mA output for applications requiring an output signal. The A1 features a bright ½" LED display, which gives the gauge improved readability and precision. The A1 digital differential pressure gauges also feature 5 user selectable engineering units including in. w.c., mm w.c., cm w.c., kPa, and Pa. The Series A1 offers an improved look, and performance compared to mechanical gauges.

To conduct airtightness tests in large buildings, simply combine several BlowerDoor fans (BlowerDoor MultipleFan): With up to three fans per door opening, Germany’s leading measuring system for airtightness easily masters even large air-flow rates! The BlowerDoor MultipleFan system consists of three BlowerDoor fans and two digital DG-1000 pressure gauges, and was developed for airtightness measurements of large buildings with an envelope area of approximately 7,000 to 36,000 m² or an internal volume of up to 440,000 m³. As a modular system, the MultipleFan system can be used for testing larger industrial and administrative buildings, but also for single-family homes and apartment buildings using one or two BlowerDoor fans.

Model 5214 Standard Test Gauge Our 0.25% accuracy Standard Test Gauge is undoubtedly recognised as a world leader for its accuracy and, of course, Budenberg Quality. This gauge incorporates a base test gauge accuracy with to a maximum of 500 graduations where possible, along with a knife edged pointer and an anti parrallax mirror to help reduce the chance of human error. Model 5314 MasterTest Gauge The 5314 now provides a higher specification and incorporates many additional features as standard. Housed in a new die-cast safety pattern case, the 5314 meets the full requirements of EN837 including a brighter anti-parallax mirror scale & knife-edge pointer for accurate repeatable readings. Model 5414 Super Test Gauge The 5414 now provides a higher specification and incorporates many additional features as standard. Housed in a new die cast safety pattern case, the 5414 meets the full requirements of EN837.

PRODUCT INFORMATION Digital Length Gauge As an option for our miter saw machines, and an alternative to the expensive gauges available in the market, we developed our DLG series Digital Length Gauges for measuring long-length profiles. The listed prices of the new DLG series including DLG 100 (1 meter), DLG 200 (2 meters), and DLG 300 (3 meters) Videolar TECHNICAL SPECIFICATIONS

The Series DPT Multi-Range Differential Pressure Transmitter was designed specifically for the building automation and HVAC industry. With field selectable ranges down to 0.1 inches w.c., this product is ideal for monitoring building pressure, static pressure, differential pressure, or air velocity and flow. The Series DPT Differential Pressure Transmitter also has jumper selectable outputs for 4-20 mA or 0-10 V and unit selection giving additional flexibility. For a virtually maintenance free transmitter, order the optional automatic zero and the transmitter will perform its own zero point maintenance. The Multi-Range Differential Pressure Transmitter also has an optional backlit LCD for giving local indication.