Diodes - Import export

We offer a Very Wide Range of Brands, please send me enquiry via liamm@merefields.com or enquires@merefields.com 

We have over 10 Million Lines of Components in our Supply. We Supply the FULL Range of Bourns Components Contact me on liamm@merefields.com

Merefields Supply a very wide range of DIODES, please send email to liamm@merefields.com for a Quote. We have over 10 Million Lines of Components in our Supply!

The AZ1117IH-3.3TRG1 is a low dropout (LDO) linear voltage regulator with an output current of 1.35 A, a power supply ripple rejection (PSRR) of 70 dB, and an input voltage of up to 15V. It has a positive fixed regulator topology and a voltage regulation accuracy of 1%. The current limit is 1A and the output current is 800mA. The output voltage is 3.3V and the packaging is Digi-ReelR Alternate Packaging. This linear voltage regulator is suitable for a wide range of applications, including power supplies, battery chargers, and portable electronics. It is also suitable for automotive applications, such as power management systems, and industrial applications, such as motor control systems.

Description:The AP1533SG-13 is a DC switching regulator based on a buck topology with a maximum operating temperature of +85°C. It has a voltage output of up to 23V, a minimum supply voltage of 4V, and a switching frequency of 300kHz. It is part of the AP1533 series and has an operating temperature range of -25°C to +85°C (TA)

Diodes - Rectifiers - Arrays Products within the diode and rectifier array family incorporate two or more discrete diodes within a single package. They are characterized in terms similar to those used for single discrete diodes, with the addition of a "Diode Configuration" attribute indicating the presence and character of any internal connections between the diodes in the device. Note that arrays with a full-bridge configuration are specifically excluded, and listed as a separate product family.

Yingxinyuan International (Group) Co., Ltd. was established in 2001. It is one of the largest authorized agents and distributors of electronic components in the world. Its headquarter is located in Shenzhen, China, and it has branches and warehouses in Hong Kong and Taiwan. The company distributes and represents more than 700 brand manufacturers, and there are more than 3 million categories of spot products in warehouses all over the country for a long time, and they can be shipped within 24 hours. The products we promise to sell are guaranteed to be brand new, original and authentic products and provide 365-day warranty service. Please contact our sales team or send the model and quantity you need to yingxinyuan@yxsmd.com.

IC LOAD SWITCH SOT25 Digi-Key DIST Single 5.5V 3A 5-Pin SOT-25 T/R Arrow

The 74LVC1G08 is a single 2-input positive AND gate with a standard push-pull output. The device is designed for operation with a power supply range of 1.65V to 5.5V. The inputs are tolerant to 5.5V allowing this device to be used in a mixed voltage environment. The device is fully specified for partial power down applications using IOFF. The IOFF circuitry disables the output preventing damaging current backflow when the device is powered down

Knight Optical We can offer Custom Moulded Aspheric Lenses for use with Laser Diode Collimators. Aspheric lens surfaces are used to correct spherical aberration (where the converging light from a lens does not have a common focal point, resulting in a distorted image) in lasers and imaging. Traditional spherical lenses cannot collimate light effectively because even small angles of incidence can produce spherical aberrations. This can mean that several components may be required to get the desired result. The non-spherical surface of an aspheric lens allows a single component to effectively focus or collimate even highly divergent emissions, potentially replacing a multi-lens system with a single aspheric lens. Therefore Aspheric Lenses that are moulded are ideal for use within laser diode-to-fibre coupling applications. For more information read the PDF..

Knight Optical We can offer Custom Moulded Aspheric Lenses for use with Laser Diode Collimators. Aspheric lens surfaces are used to correct spherical aberration (where the converging light from a lens does not have a common focal point, resulting in a distorted image) in lasers and imaging. Traditional spherical lenses cannot collimate light effectively because even small angles of incidence can produce spherical aberrations. This can mean that several components may be required to get the desired result. The non-spherical surface of an aspheric lens allows a single component to effectively focus or collimate even highly divergent emissions, potentially replacing a multi-lens system with a single aspheric lens. Therefore Aspheric Lenses that are moulded are ideal for use within laser diode-to-fibre coupling applications. For more information read PDF ….

Knight Optical supply custom laser mirrors for use at specific laser lines from the UV (200 to 400nm) to the IR (1to 40µm) wavebands. The laser mirrors can be custom made to include the following range: 1 YAG laser mirrors (High power grade) 2 Excimer laser mirrors (High power grade) 3 Argon-ion laser mirrors (High power grade) 4 Diode & broadband (Ti:Sapphire) These mirrors are made from vacuum depositing thin films of material that have differing refractive indices & thickness onto suitable substrates. Typical custom laser mirror substrates are calcium fluoride, germanium, sapphire, fused silica and Zinc Selenide which produce a high efficiency reflecting surface at the laser wavelength. Read PDF for more information.

The term "diode lines" dates back to the early days of hi-fi technology, when tubes were used in the output stages. Even today it is still used to describe cables for recording and/or playback connections between stereo equipment. Our diode cables with individually shielded wires are suitable for Chinch connections, pickup systems, stereophony and general applications in the LF range. Due to the relatively high-impedance input resistances, low-capacitance supply lines are required to avoid unwanted drop in height. 1- to 8-core constructions, each of which has low-capacitance PE insulation with individual core screening, meet these requirements. Core cross-sections of 0.08 mm² and 0.14 mm² are used.

The term "diode lines" dates back to the early days of hi-fi technology, when tubes were used in the output stages. Even today it is still used to describe cables for recording and/or playback connections between stereo equipment. Our diode cables with individually shielded wires are suitable for Chinch connections, pickup systems, stereophony and general applications in the LF range. Due to the relatively high-impedance input resistances, low-capacitance supply lines are required to avoid unwanted drop in height. 1- to 8-core constructions, each of which has low-capacitance PE insulation with individual core screening, meet these requirements. Core cross-sections of 0.08 mm² and 0.14 mm² are used.

The term "diode lines" dates back to the early days of hi-fi technology, when tubes were used in the output stages. Even today it is still used to describe cables for recording and/or playback connections between stereo equipment. Our diode cables with individually shielded wires are suitable for Chinch connections, pickup systems, stereophony and general applications in the LF range. Due to the relatively high-impedance input resistances, low-capacitance supply lines are required to avoid unwanted drop in height. 1- to 8-core constructions, each of which has low-capacitance PE insulation with individual core screening, meet these requirements. Core cross-sections of 0.08 mm² and 0.14 mm² are used.

LAS 5000XD uses Tunable Diode Laser Spectroscopy (TDLS) and comes in various models for measuring parameters such as NH3 + H2O, HF, CO + CO2, O2, HCl + H2O, etc. It combines robustness, fast response time (1 s) and high accuracy measurement in harsh environments.

Whatever you are in concert,nightclub,stadium. Let us rock and scream with LED flashing by sound control.

We have over 10 Million Lines of Components in our Supply. We Supply the FULL Range of AVX Components Contact me on liamm@merefields.com

We can make our 3D letters for you only from plexiglass. In this case, they are thermally welded with the additional use of colorless glue. The back is made of a 10 mm PVC board, which is both a base for the letters and their load-bearing element. It is possible to obtain not only right angles, but also curves. This creates the opportunity to make a letter in any shape, which, after installing LED diodes, will illuminate not only its front, but also its sides.

The LM5050MK-1/NOPB from Texas Instruments is a N+1 ORing Controller in a Digi-ReelR Alternate Packaging package. This controller features internal switches, a 130 μA operating supply current, a logic level input control, a -40 °C to 125 °C operating temperature range and a 0.001270 oz unit weight. Features: • Internal switches • Operating Supply Current: 130 µA • Logic Level Input Control • Operating Temperature Range: -40 °C to 125 °C • Unit Weight: 0.001270 oz • Packaging: Digi-ReelR Alternate Packaging • Product Category: Controllers & Switches • Type: N+1 ORing Controller • Mounting Style: SMD/SMT Applications: The LM5050MK-1/NOPB controllers are ideal for use in applications such as power supplies, computing, and telecommunications. Additionally, these controllers are suitable for use in data centers, distributed power systems, and anywhere high-reliability power distribution is required.

The AP2139AK-3.3TRG1 is a positive fixed linear voltage regulator with a single regulator and a voltage output of 3.3V. It has a maximum input voltage of 6.6V and a typical voltage dropout of 0.4V at 250mA. It is packaged in a SC-74A, SOT-753 and has an operating temperature range of -40°C to 85°C. Features: • Positive fixed linear voltage regulator • Single regulator • Voltage output of 3.3V • Maximum input voltage of 6.6V • Typical voltage dropout of 0.4V at 250mA • Packaged in a SC-74A, SOT-753 • Operating temperature range of -40°C to 85°C Applications: • Power supplies • Battery-powered devices • Automotive electronics • Industrial electronics • Telecommunications equipment

Linear Voltage Regulators

Ceramic reflectors supplied by us work particularly well in Ruby and Nd:YAG laser pumping chambers and can be a highly cost effective alternative to metal coated reflectors. They are also used extensively as reflectors in housings for high intensity lamps. > resists chemical attack > has high strength > has a high reflectivity over a broad wavelength band > has good thermal conductivity and > excellent dimensional and electrical stability at all operating temperatures. Specification: - - BAB192 (TCT97, BAB349) - - Material: 99% Alumina - - Specification: Φ31.00xΦ12.00x97.00 - - Application: welding, cutting, marking and in medical lasers (2) Single lamp and single rod - - Ceramic reflector TCT117 used - - Matchable YAG rods: φ(3-7)x140mm or longer - - Matchable lamps: ST256 (maximum OD is 8mm, overall length >270mm.) - - Suitable for 80W to 150W YAG lasers - - Dimension: 260x55x40mm

The test and certification process of the Pergamon series led projector was completed in the first quarter of 2022. The products are manufactured in 4 types as 50W-100W-150W-200W. Case is cast aluminum, impact resistance is increased with 4mm polycarbonate glass. Meanwell driver is used with Samsung led. Ticket ; II 2G Ex eb mb IIC T5 Gb II 2D Ex tb IIIC ( T90' ) Db IP66 document ; IEP 22 ATEX 1061 on sale; It is offered as 1 meter cable, 1 brass-nickel ex-coupling, 1 brass-nickel blind plug and connection apparatus.

The PGR Series was launched in June 2021. The product is designed to be used in Zone1-Zone21 areas against gases and dust. Electric sources are encapsulated in the design and there is no open energy point. Sealing is provided with a plastic gasket at the junction of the cover and the body. Led bars and driver are in aluminum case. Ticket; II 2G Ex eb mb IIC Gb II 2D Ex tb IIIC ( T90') Db IP66 on sale; It is offered with 1 meter cable, 1 brass-nickel ex-coupling and connection apparatus. Product types; They are manufactured in 3 types as 10W - 20W -40W. Document; IEP 21 ATEX 0964

The certification period of Troya Series luminaires was completed in September 2020 and hot sales to the market started. The product is designed to be used in zone2-22 areas against gases and dust. Body and cover are 100% polycarbonate. The materials used in the application have non-sparking properties. Protection is provided with a one-piece gasket at the junction of the cover and the body. The connection points of the lamps are made with pins of our own design and manufacture. The lamps, on the other hand, are attached with handles of our own design and manufacture. Thanks to the handles, the desired angle can be given to the led lamps. The product provides protection between -20 and +40 degrees at IP65 Level. Product types ; 1x18W 1x36W 2x18W 2x36W 2x58W Led fluorescent luminaires with one-sided power (with internal driver)

We’ve perfected our knowledge and experience in diode technology with Red Shein Fein. Elegant design and elegant lines appeal to your visual taste while being small and portable allows you to use practical. Thanks to the enhanced security system, safer handling and 3 different wavelengths, you can achieve much more effective hair root destruction. Thanks to Red Shine Fein’s advantageous cost, ergonomic design and 3 different Wavelength technologies, you can increase the prestige of your business with quality service to your customers.

DIODE CARDINAL, Developed by Mormed, offers a visible effect. DIODE CARDINAL, which offers comfortable hair removal with its specially produced extra cooled handpiece, increases customer satisfaction. DIODE CARDINALE has proven technology for fine and thick hairs. The laser beam targets the hair follicle. Thus, it is an ideal system for applying on the cheeks hairs and beards, genital area, arms and legs. By help of DIODE CARDINALE with a wavelength of 808 nm, you can perform effective and comfortable hair removal by minimizing application time.

The Diamond series LED high-temperature bay light is distinguished from ordinary ufo-style high bay lights. It is environmentally friendly, no mercury, no ultraviolet light, energy-saving, high luminous efficiency, long life, dimming, intelligent control, and has a wide range of applications, including retail stores, warehouses, plants, gyms, shops, supermarkets, food processing factory, fresh food shelf, restaurant, workshops, car wash. Using diamond as the standard UFO LED light, its maximum benefit is 150lm/w and 190lm/w to meet the lighting of the plant, warehouse, retail store, gym, and other places. At the same time, the higher the lumen, the higher the brightness, and the total quantity of UFO LED lights in the entire application area will be less. This is undoubtedly saving you money. So what is the designated lighting? First, due to the smooth surface, IP66 & IP69K rating, no exposed screws, no glass material, Diamond LED high bay light can be used for food processing factory