Humidity sensors - Import export

Micro Environment Monitoring System, Integrated Temp/Humidity Sensor, POE. The ENVIROMUX® Micro Environment Monitoring System (EMS) monitors critical environmental conditions, such as temperature, humidity, liquid water presence, power, intrusion, and smoke. When a sensor goes out of range of a configurable threshold, the system will notify you via email, web page, network management (SNMP), and/or SMS messages (via external USB 3G modem). The system functions independently or as an IP-connected remote sensor for the ENVIROMUX-2D/5D/16D. The ENVIROMUX-MICRO-T features an integrated temperature sensor, two RJ45 sensor ports for external temperature/humidity sensors, and two dry contact inputs. The ENVIROMUX-MICRO-TRHP features an integrated temperature/humidity sensor, two RJ45 sensor ports for external temperature/humidity sensors, two dry contact inputs and built-in Power over Ethernet (PoE).

SNMP card DL802 (art. CNDL802) is designed to monitor and control the UPS over a local area network or the Internet. Monitoring, control and configuration are carried out through the builtin WEBinterface, TelNet or NMS, with the provision of automatic correct shutdown of servers and workstations connected to the UPS. The SNMP card allows you to remotely monitor the values ​​of the input and output parameters of the UPS, the battery charge level, notify the user about system events and alarms through the builtin WEB interface, via the SNMP protocol (including by sending Trap messages in the event of emergency situations) and by sending messages by email. It also provides the ability to remotely control the UPS (reboot, activation of tests, on / off sound notification)

SHT75DK Digital, High Precision Sensor for Humidity and Temperature The digital humidity sensor SHT75DK comes fully calibrated and is easy to install thanks to its pin-type package (for 1.27mm sockets). Individual calibration and digital output make it a fully exchangeable option and also spare you the painful and intricate recalibration after changing it. Its sensor head is connected to the pins only through a thin bridge isolating it thermally which further improves its response time. A sealing ring in front of the pins protects against humidity and corrosion. The sensor element can completely seal openings with a diameter of 7mm.

The DKRF300 and DKRF300-0835 probes are based on the combined humidity and temperature Sensor SHT75 by Sensirion. Their filter protects the sensor against splash water and dust. Being of robust design the stainless steel probe body offers additional protection. This humidity/temperature sensor provides the digital two-wire signal by Sensirion (see SHT75DK data sheet for further information).

Based on the combined humidity and temperature sensor SHT21 by Sensirion we offer you the DKRF310XXS probe. The sensor is either integrated into a miniaturized stainless steel sleeve (d=4mm, l=20mm) or can be delivered as a tube probe. It provides an I2C output signal.

The humidity sensor DKRF4001 comes with two analog outputs. Its micro-module is specifically designed for OEM applications. High accuracy as well as excellent long-term stability are among its features. The calibrated, linear outputs offered are 0..1/0..5/0..10VDC. The sensor modules can perform measurements at 0...100%RH and between -20...+80C. With the right configuration measurement applications which demand higher temperatures can be performed.

The micro-module DKRF4002 is designed for humidity measurements withing the range of 0...10%. Its humidity sensor offers high accuracy and excellent long-term stability and was specifically developed for OEM applications which require a RS232 interface Signals both for temperature and relative humidity can be output through the serial interface. Two models differing in measuring accuracy are available: DKRF4002 with +/-3.5RH and DKRF4002-P with +/-2%RH.

The Vaisala HUMICAP® Humidity and Temperature Transmitter Series HMT330 is designed for demanding industrial applications where stable measurements and extensive customization are essential. With multiple optionsto choose from, the instrument can be tailored to meet the specific needs of each individual application.

Having a very low energy consumption the humidity loggers can be used for up to a few years without any battery change. While DCXP-RH8 is a 16 channel datalogger for humidity and temperature, whcih means up to 8 combined probes can be connected, the DCXP-RH16 has twice as much chenels ready to connect up to 16 combined humidity and temperature probes. For your application Driesen + Kern GmbH offers a range of probes: miniature probes (D=4mm, L=20mm) , Probes for pressurised pipes (DKRF374), Standard probes D=8mm und L=40/100mm (DKRF300) and many more.

The DK8040 is a robust and flexible stationary data logger for measuring climate parameters. The inputs can be configured for voltage signals and special sensors such as PT100 temperature probes, soil moisture and humidity sensors or condensation detectors. In additon, connection of sensors for rainfall and solar radiation is also possible. The logger comes in a robust, IP65 splash water protected housing which allows for measurements even under rough conditions, e. g. in the rain or snowfall.

The DKRF417 humidity and temperature transducer ist the best choice for measurements at very high pressure levels. It is pressure-resistant up to 30 bar. Thanks to its small dimensions and M8 thread it is very well suited for applications within compressed air lines with small diameter. The probe’s operating range is 0...100% RH and it tolerates temporary condensation. It delivers highly accurate readings of up to 1.8%RH / 0.3°C. The DKRF417 humidity/temperature probe provides reliable readings even in challenging environmental conditions: · Compressed Air Systems · Engine Test Benches · Industrial Automation Technology We offer the compact, pressure-resistant transducer DKRF417 for relative humidity and temperature as well as the pressure-resistant humidity sensor EXT-D of the DKRF470 Series and the humidity and temperature Probe DKRF400.

Multi-Channel Data Logger DK650 “rugged-Visual” with Internal and External Sensors The “rugged-Visual” series by Driesen+Kern GmbH sets standards for customizable data acquisition. In addition to ist five integrated sensors for humidity, temperature, barometric pressure, light, and differential pressure the device offers three input slots for external probes or analogue signals. All three slots can be completely configured by the user - hence you don’t need to tie yourself down beforehand, but rather you can customize the “rugged-Visual” according to your measuring task. The robust logger stores up to 4 million readings and its freely selectable sampling interval reaches from 32 Hz to 24 hours. Using modern low power technologies the device can perform continuous operation for up to 4 years with only one standard lithium battery. An internal back up system provides several days of continued logging in case the battery is completely drained. Of course, you can always replace the...

Multi-Channel Data Logger DK650 “rugged-Visual” with Internal and External Sensors The “rugged-Visual” series by Driesen+Kern GmbH sets standards for customizable data acquisition. In addition to ist five integrated sensors for humidity, temperature, barometric pressure, light, and differential pressure the device offers three input slots for external probes or analogue signals. All three slots can be completely configured by the user - hence you don’t need to tie yourself down beforehand, but rather you can customize the “rugged-Visual” according to your measuring task. The robust logger stores up to 4 million readings and its freely selectable sampling interval reaches from 32 Hz to 24 hours. Using modern low power technologies the device can perform continuous operation for up to 4 years with only one standard lithium battery. An internal back up system provides several days of continued logging in case the battery is completely drained. Of course, you can always replace the...

Micro Sensor for Humidity and Temperature The Micro Sensor DKRF410 is available as one of two models which are especially suitable for humidity and temperature measurements in areas difficult to access such as insulation, concrete walls, floor screed, product and packaging tests. The DKRF410 probe has a range of 0...100% RH and offers an accuracy of up to 2% RH. At the same time temperature measurements with a range of -40...+80°C can be undertaken. Two separate analogue outputs each provide a linear signal f 0...1V / 0...5V or 0...10V. A passive output signal for temperature (PT100) can also be provided. If you require a 4-20 mA output signal the DKRF 473 industrial transmitter can be used with the -XS and -XXS probe. The DKRF410 is also available with digital outputs (RS232, USB, RS485).

The Driesen + Kern GmbH DKRF425 probe series for flush-mounting is designed for controls and automation such as in HVAC. The sensors measure tempeature, humidity, CO2 concentration and light intensity. They fit into standard flush-mounted boxes and are compatible to switch product ranges of several manufacturers. This makes them well suited for integration in existing building concepts.

Moisture meter Name: HT-4000F thermo hygrometer - Flooring Material: Flooring, concrete slab Mc: Temperature: -40°C - 124°C (-40°F - 255°F) Dew Point: -40°C - 80°C (-40°F - 176°F ) GPP Range: 0.1 - 3820 GPP (0.01 - 545 GPK) Vapor pressure: 0 - 7 PSI (0 - 47 KPA) Calibrations: Temperature, Dew Point, GPP Range, Vapor Pressure Overview The HT-4000F is a stand-alone thermo-hygrometer for flooring installers and restoration contractors alike The HT-4000F has the same fast acclimating RH/T sensor found in our popular TotalCheck and Navigator Pro 3-in-1 moisture meters For flooring contractors who prefer having separate meters to one combination meter, the HT-4000F is the perfect solution. The meter’s sensor is also detachable, making the HT-4000F ideal for testing a concrete slab (if needed, even according to the ASTM F2170 standard) Your Benefits: Bright, clear digital display Relative Humidity Range: 0% - 100%, sensor can be used for in-situ concrete testing following the ASTM F1

Moisture meter Name: HT-4000 thermo hygrometer - Building inspection Mc: Temperature: -40°C - 124°C (-40°F - 255°F) Dew Point: -40°C - 80°C (-40°F - 176°F ) GPP Range: 0.1 - 3820 GPP (0.01 - 545 GPK) Vapor pressure: 0 - 7 PSI (0 - 47 KPA) Calibrations: Temperature, Dew Point, GPP Range, Vapor Pressure Overview For building inspectors who prefer having separate meters to one combination meter, the HT-4000 is the perfect solution. The HT-4000, a fast response stand-alone thermo-hygrometer has the same fast acclimating RH/T sensor found in our popular TotalCheck and Navigator Pro 3-in-1 moisture meters. Your Benefits: Bright, clear digital display Relative Humidity Range: 0% - 100%, sensor can be used for in-situ concrete testing following the ASTM F170 standard Temperature Range: -40°C - 124°C (-40°F - 255°F) Dew Point Range: -40°C - 80°C (-40°F - 176°F) GPP Range: 0.1 - 3820 GPP (Grains Per Pound) GPK Range: 0.01 - 545 GPK (Grains Per Kilogram) Vapor Pressure Range: 0 - 7 PSI (P

We offer stand-alone Environmental monitoring appliance that provides dynamic, real-time temperature monitoring, humidity monitoring for server room, Datacentre and computer rooms or any critical environment. It has following features: 1) Real time monitoring of Humidity and Temperature. 2) Includes dry contact for alarms from critical equipment include power monitoring, water sensors, smoke and fire alarms, motion detectors, airflow, and access/entry sensors. 3) Permits remote monitoring of temperature, humidity and digital dry contact. 4) Notification of alarms via email, SMS, SNMP traps when specified temperature and humidity thresholds or the change of status of a digital dry contact signal 5) Simple integration to a Building Management System (BMS). 6) Capable of Modbus over TCP/IP. Built-in Web server. 7) Option of additional humidity & Temperature sensor. https://www.datacenter-serverroom.com/environmental-monitoring-server-room-datacenter-uae

The LF-TA transmitter of Schaller measurement instrumentation, with its robust and easy to mount aluminium housing, is best suited for all applications in this field. For temperatures of up to 60°C for laboratory, climate control and drying technology, wood processing industry, food and animal feed industry, building industry, printing and paper industry, agriculture, biotechnology and pharmaceutical industry.

The water activity of products, especially of food, indicates the amount of unbound water in a material. This quality factor, also called aw value, depends on the water vapour pressure in the material, on the current temperature and on the water vapour pressure of the surroundings. The humimeter RH2 water activity meter enables the quick and easy determination of the water activity. Furthermore, due to the large sample volume of the water activity measuring chamber, higher quantities can be measured within a short time, enables a higher number of taken random samples. The simple handling guarantees a cost-saving and faultless process of measuring the activity of water value of food. + Relative humidity, absolute humidity, dew point, equilibrium moisture content, aw-value + Long stable humidity sensor + Easy data storage at the portable moisture meter + Analysis on the PC and printer available + Optimal documentation of your quality

The humimeter RH5 paper moisture meter is a powerful moisture tester with sword probe (see picture) for humidity measurement in paper stacks. To determine humidity, the sword sensor only has to be inserted into the paper stack and left there for a short conditioning time. Via the integrated datalog the measuring values can be stored on the humimeter RH5 paper moisture meter and additional data can be added. You also have the possibility to use the Autolog function. This function automatically saves measuring values in adjustable time intervals.

The humimeter FLH hops moisture meter can determine the water content of hop bales, hops equilibrium moisture content, air humidity in a kiln or in conditioning chamber as well as long-term recording of temperature and climate data. For connection with the following external sensors: insertion probe for hops, air humidity and temperature sensor, infrared temperature sensor. For determination of water content of loose or compressed hops, hops equilibrium moisture content, air humidity of kiln and conditioning chamber, long-term recording of temperature and climate data. Quick and simple determination of water content of hops with humimeter FLH hops moisture meter.