Low cost - Import export

There is now a reliable, low-cost range of robots available on the market. Produced in large numbers by reputable manufacturers, these robots can perform simple, repetitive tasks consistently and efficiently. They can easily be integrated into a production process, offering simple and flexible operation. Following an in-depth analysis, in collaboration with robot manufacturers and according to the technical constraints specific to your project, we provide the simplest robotic solution that offers the best compromise between technical compliance and overall financial cost.

25 dimensions - ex stock iglidur® Plain bearing - Product overview New as standard range: iglidur® J4 is the new low-cost material for long lifetimes for low to medium loads. Zero lubrication, zero maintenance Low-cost-material for large volumes Low coefficients of friction Media resistant Lowest humidity absorption Bearings made of iglidur® J4 in a satellite receiving unit material data: iglidur® J4 Density 1,48 g/cm 3 Colour Gray Max. moisture absorption at 23°C and 50% r.h.: 0,3 weight-% Max. water absorption 1,3 weight-% Upper long-term application temperature 90°C Upper short-term application temperature 120°C Lower application temperature -50°C Bending E-module 2.350 MPa Max. surface pressure 35 MPa Surface resistance >10 12Ω 25 dimensions - ex stock

iglidur® D: low cost material with silicon Low-cost-material with low coefficients of friction and good wear resistance at low loads. iglidur® D is available as cylindrical bearings and plain bearings with flange. Low coefficients of friction at high speeds For low loads Very cost-effective Vibration-damping Lowest humidity absorption

Other information Series 14040 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 14240 Inner height hi: 62 mm Inner widths Bi: 50 - 400 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Serie 14550 Inner height hi: 70 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 600 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 15050 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Serie 15250 Inner height hi: 86 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 14140 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 14340 Inner height hi: 62 mm Inner widths Bi: 50 - 400 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Serie 14650 Inner height hi: 70 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 600 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 15150 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Serie 15350 Inner height hi: 86 mm Inner widths Bi: 50 - 400 mm bending radii R: 150 - 600 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series R18840 Inner height hi: 56 mm Inner widths Bi: 75 - 462 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Tube, swivel lid Series R19050 Inner height hi: 70 mm Inner widths Bi: 50 - 600 mm bending radii R: 200 - 600 mm Pitch: 91 mm E-Tube, swivel lid Series R19850 Inner height hi: 80 mm Inner widths Bi: 75 - 462 mm bending radii R: 200 - 500 mm Pitch: 91 mm E-Tube, swivel lid Assembly tool for E4-series For the practical opening and closing of the E4 series. Big savings in assembly time Assembly tool for E4-series Special design Electrically conductive ESD/ATEX versions on request "Mounted on the side" unsupported application possible High torsionalstiffness Other information Series 14040 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 14240 Inner height hi: 62 mm Inner widths Bi: 50 - 400 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Serie 14550 Inner height hi: 70 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 600 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 15050 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Serie 15250 Inner height hi: 86 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 14140 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 14340 Inner height hi: 62 mm Inner widths Bi: 50 - 400 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Serie 14650 Inner height hi: 70 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 600 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 15150 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Serie 15350 Inner height hi: 86 mm Inner widths Bi: 50 - 400 mm bending radii R: 150 - 600 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series R18840 Inner height hi: 56 mm Inner widths Bi: 75 - 462 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Tube, swivel lid Series R19050 Inner height hi: 70 mm Inner widths Bi: 50 - 600 mm bending radii R: 200 - 600 mm Pitch: 91 mm E-Tube, swivel lid Series R19850 Inner height hi: 80 mm Inner widths Bi: 75 - 462 mm bending radii R: 200 - 500 mm Pitch: 91 mm E-Tube, swivel lid Assembly tool for E4-series For the practical opening and closing of the E4 series. Big savings in assembly time Assembly tool for E4-series E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Joining, separating and opening of the E-Chain® and E-Tubes. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. E4/light New E4/light version with the proved and tested "tongue and groove" system of the Series E4/4 Low weight Optimized interior-exterior dimensions ratio Cost efficient Manifold interior separation potentials Large accessory kits Thin external links Max. travel distance: 150 - 400 m Typical industrial sectors and applications Machine tools (closed E4/light tubes and open E-Chain®) Material processing Stone cutting machines Woodworking machines General mechanical engineering Vehicles Construction machinery Limited application of long travels Special design Electrically conductive ESD/ATEX versions on request "Mounted on the side" unsupported application possible High torsionalstiffness

Diameter [mm]: length [mm]: Polymer bearings applications overview Polymere bearings application examples overview Polymer bearings applications overview iglidur® J4 - low cost and low wear Lubricant- and maintenance-free Low-cost-material for large volumes Low coefficients of friction Media resistant Lowest humidity absorption Diameter [mm]: length [mm]: Polymer bearings applications overview Polymere bearings application examples overview Polymer bearings applications overview

We supply tailored, special parts manufactured with our state-of-the-art cold-moulding and extrusion equipment. We can press cold-moulded articles – whether solid, semi-hollow or hollow – according to your drawings. Complex moulded parts and individual, special projects are our strengths. Our cold-moulding competence covers flanged bolts, studded parts, stepped bores and parts with an internal or external thread. Possible materials: Regular steel, stainless steel, brass, copper, light metals. Available with all standard surfaces.

The one pole indoor used disconnector of the MI-UNEL series. Besides this standard execution there's even a invertor-switch with mechanical interlock, special low-cost version, etc. develloped.

Low-Cost Humidity and Temperature Probe DKRF4050/DKRF4060 With the DKRF4050 and DKRF4060 Driesen+Kern GmbH well-priced instrument for humidity and temperature. With its G3/8” connection thread the compact cable probe (d=24.5mm, l=46mm) can easily be installed in plants and facilities. Alternatively, an extension for the probe is available with which the probe can be attached to a compression fitting. Two models are available: The DKRF4050 with 2 linear analogie outputs 0...1V/0...5V or 0...10V and the DKRF4060 with a CMOS-UART interface.

Product Features: • The RID series is a general purpose inlet filter with fast-on tags for termination, giving good performance for both common mode and differential mode interference. • A standard IEC inlet filter available from Roxburgh EMC, available in 4 standard current ratings, 1A, 3A, 6A and 10A. Rated at 250V. Also available with increased x and y caps for optimum performance. • Meets overvoltage category II of IEC664 and complies with BS EN 60950. All products are RoHS compliant and approvals include UL and CSA. • Typical applications are computers and computer peripherals, digital equipment, measuring instruments, monitors and display units, vending machines, gaming machines, printers and copiers.

Product Features: • The RES5 series is low cost single stage chassis mounted filter from Roxburgh EMC and has good performance as standard. • Available in 5 current ratings form 3 to 15 Amps, these single stage chassis mounted filters have a good performance for both common mode and differential mode interference. Also available with increased x and y caps for optimum performance. • Meets with the requirement of UL1283 and overvoltage category II of IEC664. All products are RoHS compliant and approvals held include UL and CSA. • Typical applications are communications equipment, measuring and testing instruments, industrial equipment such as UPS, inverters, converters, printers, copies and fax machines.

Product Features: • RES3 is a two stage low cost filter from Roxburgh EMC which offers high performance in compact housing. • Available in 2 current ratings from 3 and 5 Amps, these two stage chassis mounted filters offer high performance of both common mode and differential mode interference in a very compact size. Also available with increased x and y caps for optimum performance. • Meets with the requirement of UL1283 and overvoltage category II of IEC664. All products are RoHS compliant and approvals held include UL and CSA. • Typical applications are digital equipment point of sale equipment, measuring and testing instruments, industrial equipment such as UPS, inverters, converters, printers, copiers and fax machines.

Product Features: • Quite simply, the ABF range are low cost single phase drive filters with low leakage. • The ABF range, available in 6 Amps and 10 Amps, are low cost drive filters. • Typical applications include inverters, SCR phase angle firing power control. • All products are RoHS compliant.

Product Features: • The RES1 range of filters offers single stage product with medium performance - still economically priced. • Available from stock, these products are UL and CSA approved. All products are RoHS compliant. • Similar to the popular RES5 single stage chassis mounted filters, but the RES1 range offers increased performance. • Typical applications are communications equipment, measuring and testing instruments, industrial equipment such as UPS, inverters, converters, printers and copiers.

The low cost industrial ICP® / IEPE vibration sensor, model 601A02, is suitable for slow speed applications such as slow moving roller element bearings in a paper mill. Increasing the sensitivity of the sensor to 500 mV/g can improve the signal resolution in these applications. Despite their economical name, low-cost accelerometers are ideal for applications where the sensors are permanently mounted to collect vibration data 24/7, monthly or even quarterly. Low-cost accelerometers are all hermetically sealed in stainless steel housings and most are covered by IMI Sensors' Lifetime Warranty Plus programme. — Industrial ICP® vibration sensor — Measuring range 10 g — Sensitivity 500 mV/g — Frequency range 0.17 ... 10,000 Hz — Single point calibration at 100 Hz — 2-pin connection socket on top For an individual offer, please contact us directly.

Cost-effective industrial ICP®/ IEPE accelerometers are ideal for fixed installations and use in continuous on-line monitoring systems. This improves safety when installed in hazardous or inaccessible locations. Connection can be made via switches or junction boxes for route-based data acquisition systems. The Model 601A01 is suitable as a low-cost industrial ICP®/ IEPE accelerometer for a general purpose. It has a very good signal-to-noise ratio and a ceramic sensing element. The low-cost ICP®/ IEPE accelerometers have an economical design and are ideal for fixed mounting. Their rugged stainless steel housing with hermetic sealing and housing-isolated electronics, eliminate noise problems. — Industrial ICP® vibration sensor — Measuring range 50 g — Sensitivity 100 mV/g — Frequency range 0.27 ... 10,000 Hz — Single-point calibration at 100 Hz — 2-pin connection socket on top For an individual offer, please contact us directly.

The 603C01 ICP® is one model in a very diverse line of 603-Series accelerometers. The 603-Series includes alternative sensitivity models, hazardous area approved models, dual output models and models with an integral cable. For monitoring systems with many input channels, robustness, reliability and a favourable sensor price are of great importance. Low-cost sensors with ICP®/IEPE technology are used when a large number of measuring points are to be continuously monitored and an evaluation of the vibration spectrum is required. is required. — Industrial ICP®/IEPE vibration sensor — Measuring range 50 g — Sensitivity 100 mV/g — Frequency range 0.5 ... 10,000 Hz — Single-point calibration at 100 Hz — 2-pin connection socket on top — With metric (M) or inch mounting bolt If you have any further questions about this sensor model, please do not hesitate to contact us. We will be pleased to help you.

The Lattice LCMXO3LF-6900C-6BG256C is a low-cost, low-power, high-performance Field Programmable Gate Array (FPGA) device. It is a member of the Lattice MachXO3LF family of FPGAs and is designed to provide a cost-effective solution for a wide range of applications

Streamlines workflow and boosts efficiency The CipherLab 1070 1D Barcode Scanner offers an affordable solution to help businesses streamline workflow and boost efficiency on shop floors and at checkout stands. Lightweight and ergonomic, this CCD contact 1D scanner fits nicely in your grip and within any retail settings. Together with 3-year warranty, the 1070 1D Barcode Reader ensures long-lasting performance with a significantly lowered total cost of ownership, as well as a high return on investment for any retail business. ** Click for more **

Color stains in the CE series have been specially formulated for the colouration of glazes used in the production of ceramic tile and satisfying the following criteria: ease of use, constancy and homogeneity, minimum reaction with the glaze, intense colouration, wide cromatic range and low cost.

The 30g silicone swim cap is a perfect all-round cap, we can offer printing services on all caps.