• europages
  • >
  • COMPANIES - SUPPLIERS - SERVICE PROVIDERS
  • >
  • electric equipment

Results for

Electric equipment - Import export

Germany

Verified by Europages

CSN® Protection Resistors are used for protection of electric equipment in case of shortterm peak currents. Due to the high capacity of energy absorption, CSN® Protection Resistors can absorb several kiloamperes for a limited period of time, protecting connected modules.

Request for a quote

Germany

Verified by Europages

Cold rolled strip is used in a variety of applications. It meets high demands on forming behaviour, dimensional tolerances and surface finish, which offers our customers decisive advantages! HFP cold rolled strip is ideally suited for all stamping, bending, drawing and deep drawing purposes. From ball bearing housings to roll cutting and punching strips, hose clamps, headlight reflectors, electrical equipment, office supplies and tubes to safety parts of all kinds, a wide variety of components can be manufactured for various industries. DC 01, DC 03, DC 04 according to DIN EN 10139 / mild steel - St 37/ special grades on request Depending on the customer's requirements, we supply treatment states from LG to C690.

Request for a quote

Turkey

Verified by Europages

"High-speed automatic transfer switches 1 phase input / 1 phase output automatic transfer switches. These high-tech and high efficient devices primarily intended for industrial, marine and information technology applications. These devices transfer the load as automatic or manual between two different sources, in a safe manner, without interruption. When user defined threshold current exceeded, audible and visible alarm alerts. All necessary operations for these fully DSP-controlled devices can be done through the keypad or web interface, the primary source can be selected."

Request for a quote

United Kingdom

Verified by Europages

Heatshrink Tubing & Sleeving is a popular choice of product due to its shrinking ability, allowing the material to constrict around whatever is placed in between. Often used inside Electronics industries with cables and wires, Heatshrink is perfect for repairing a faulty connection quickly and easily. Also available in caps, these are excellent for sealing off the end of an application, whether it is a wire or piece of tubing. For our full selection of Heatshrink product please see our website where you can request samples, view sizes, prices and even talk to our expert support.

Request for a quote

France

Verified by Europages

We manufacture rough or fully machined circuit breaker ring for electrical motors in copper alloys or pure copper

Request for a quote

France

Verified by Europages

We manufacture rough or fully machined circuit breaker bush for electrical power plant in copper alloys or pure copper

Request for a quote

France

Verified by Europages

We manufacture rough or fully machined collectors and tubes for electro galvanization lines in pure copper

Request for a quote

France

Verified by Europages

We produce different electrical connections in pure copper, aluminium bronze, tin and lead bronze as well as brass. Pieces are delivered as-cast, rough or fully machined.

Request for a quote

France

Verified by Europages

We manufacture finish machined rings or rough machined bushes in bronze, brass, copper alloys, special alloys

Request for a quote

Poland

Verified by Europages

Mounting rails used for assembly of modular equipment, wires and cables. Bars ideally meet installation requirements and harmonize with the interior. Steel mounting rails are applicable in a wide range of home and industrial installations. Product application: - assembly of electrical modular equipment and other electrical and electronic devices. - lighting assembly

Request for a quote

Germany

Verified by Europages

Screw plug for the secure sealing of unused threaded or clearence holes. Features: — Temperature range depends on the material of the o-ring VMQ: -55 °C / + 120 °C EPDM: -40 °C / + 120 °C NBR: -40 °C / + 100 °C — Protection grade IP66 / IP68 - 10 bar (6h) / IP69K

Request for a quote

Germany

Verified by Europages

The PERFECT cable gland made of polyamide is the perfect cable entry solution for many industrial applications. Features: — integrated anchorage for cables — wide sealing and clamping range — for cables from 3 to 44 mm — easy-to-install — temperature range -20 °C / +100 °C (dynamic) -40 °C (static, short term) — Protection grade IP68 - 5 bar — Test standard UL 514B — many variations and accessories available

Request for a quote

Germany

Verified by Europages

The PERFECT cable gland with multi-hole insert is the perfect cable entry solution for the installation of several single cables. Features: — easy-to-install — temperature range -20 °C / +100 °C (dynamic) -40 °C (static, short term) — Protection grade max. IP65

Request for a quote

Germany

Verified by Europages

The WADI one EMC cable gland made of nickel-plated brass is the perfect cable entry solution for cables with shielding. Features: — quick and easy EMC connection — large-area sealing protects the cable — integrated anchorage with high retention — wide sealing and clamping range — for cables from 3 to 53 mm — the inner sealing ring can be removed easily for larger cables — high UV, ozone and weather resistancy — temperature range -40 °C / +100 °C (dynamic) — protection grade IP 66 / IP68 up to 15 bar (30 min.) / IP69 — material of sealing insert fulfils UL 94 HB — with metric thread from M12 to M63

Request for a quote

Germany

Verified by Europages

The WADI one cable gland made of stainless steel is the perfect cable entry solution for demanding applications. Features: — large-area sealing protects the cable — integrated anchorage with high retention — wide sealing and clamping range — for cables from 3 to 53 mm — the inner sealing ring can be removed easily for larger cables — high UV, ozone and weather resistancy — temperature range -40 °C / +100 °C (dynamic) — protection grade IP 66 / IP68 up to 15 bar (30 min.) / IP69 — material of sealing insert fulfils UL 94 HB — with metric thread from M12 to M63

Request for a quote

Germany

Verified by Europages

The PERFECT cable gland with spiral top is the perfect cable entry solution for movable flexible cables. Features: — integrated anchorage for cables — wide sealing and clamping range — for cables from 3 to 18 mm — easy-to-install — temperature range -20 °C / +100 °C (dynamic) -40 °C (static, short term) — Protection grade IP68 - 5 bar — Test standard UL 514B — with metric, Pg- or NPT-thread

Request for a quote

Germany

Verified by Europages

The PERFECT cable gland made of nickel-plated brass is the perfect cable entry solution for many industrial applications. Features: — integrated anchorage for cables — protection against twisting — wide sealing and clamping range — for cables from 3 to 44 mm — easy-to-install — temperature range -20 °C / +100 °C (dynamic) -40 °C (static, short term) — protection grade IP68 - 5 bar — many variations and accessories available

Request for a quote

Do you sell or make similar products?

Sign up to europages and have your products listed

Add my business

Germany

Verified by Europages

The PERFECT cable gland made of stainless steel 1.4305 is the perfect cable entry solution for many industrial applications. Features: — integrated anchorage for cables — protection against twisting — wide sealing and clamping range — for cables from 3 to 42 mm — easy-to-install — temperature range -20 °C / +100 °C (dynamic) -40 °C (static, short term) — Protection grade IP68 / IP69 — Test standard UL 514B — with metric thread M12 - M63

Request for a quote

Germany

Verified by Europages

The PERFECT AirVent cable gland: protection for hermetically sealed electro-technical and elecronic enclosures against condensation water from alternating temperature and pressure. Features: — continuous ventilation — adaptation of the inner pressure — water entry pressure of the Membrane > 0,3 bar — available in sizes M20, M25 — for cables from 5 to 16 mm — temperature range -20 °C / +100 °C — protection grade IP66 / IP68

Request for a quote

Germany

Verified by Europages

The CLAMPING JAW cable gland made of nickel-plated brass is the cable entry solution for applications where increased anchorage is required. Features: - increased centrical anchorage - for cables from 5,5 to 45 mm - temperature range -30 °C / +100 °C - Protection grade IP54 - with metric or Pg-thread

Request for a quote

Germany

Verified by Europages

The WADI heat cable gland made of stainless steel 1.4404 / AISI 316L is the perfect cable entry solution for high temperature applications up to +200°C. It has also a very good resistance against many chemicals. Features: — large-area sealing protects the cable — integrated anchorage with high retention — wide sealing and clamping range — for cables from 3 to 53 mm — the inner sealing ring can be removed easily for larger cables — very high UV, ozone and weather resistancy — temperature range -40 °C / +200 °C (dynamic) — protection grade IP 66 / IP67 / IP69 — very good resistance against many chemicals — with metric thread from M12 to M63

Request for a quote

Germany

Verified by Europages

Waterproof enclosures with protection grades IP67 or IP68 for outdoor use are not automatically sealed against vapour and humid air. To avoid negative pressure, high humidity and condensation inside the enclosure a continuous Ventilation and pressure equilibrium is necessary. This function can be achieved by using a venting element made by Jacob. Features: - Continuous ventilation and adaptaion on the inner pressure - Hydrophobic and oleophobic PES- membrane - Body from stainless steel 1.4305 - Theoretical air flow through usable surface up to 75 l/h at Delta-p = 0,07 bar - Water entry pressure >= 0,83 bar (dynamic WEP, 30 seconds) - Temperature range -40°C / +100°C - Protection grade IP66 / IP68 - 0,6 bar (60 min.) / IP69

Request for a quote

Germany

Verified by Europages

The WADI heat cable gland made of nickel-plated brass is the perfect cable entry solution for high temperature applications up to +200°C. It has also a very good resistance against many chemicals. Features: — large-area sealing protects the cable — integrated anchorage with high retention — wide sealing and clamping range — for cables from 3 to 53 mm — the inner sealing ring can be removed easily for larger cables — high UV, ozone and weather resistancy — temperature range -40 °C / +200 °C (dynamic) — protection grade IP 66 / IP67 / IP69 — very good resistance against many chemicals — with metric thread from M12 to M63

Request for a quote

Germany

Verified by Europages

The PERFECT cable gland made of polyamide V-0 is the perfect cable entry solution for areas where superior claims on fire protection are required. Features: — Polyamide material fulfils UL 94 V-0 and EN 45545-2, R22: HL3, R23: HL3 — integrated anchorage for cables — wide sealing and clamping range — for cables from 3 to 42 mm — easy-to-install — temperature range -20 °C / +100 °C (dynamic) -40 °C (static, short term) — Protection grade IP68 — Test standard UL 514B — with metric or Pg-thread

Request for a quote

Germany

Verified by Europages

Waterproof enclosures with protection grades IP67 or IP68 for outdoor use are not automatically sealed against vapour and humid air. To avoid negative pressure, high humidity and condensation inside the enclosure a continuous Ventilation and pressure equilibrium is necessary. This function can be achieved by using a venting element made by Jacob. Features: - Continuous ventilation and adaptaion on the inner pressure - Hydrophobic and oleophobic PES- membrane - Polyamide material fulfills UL 94 V-0 and EN 45545-2, R22: HL3 / R23: HL3 - Theoretical air flow through usable surface up to 170 l/h at Delta-p = 0,07 bar - Water entry pressure >= 0,83 bar (dynamic WEP, 30 seconds) - Temperature range -40°C / +100°C - Protection grade IP66 / IP68 - 0,6 bar (60 min.) / IP69

Request for a quote

Germany

Verified by Europages

Whenever pre-assembled cables need to be led into a housing, the cable entry system KADL is the perfect solution. KADL is installed with one click - easy and timesaving. The modular structure allows a step-by-step installation of 3 to 25 cables. With 16 different grommets a wide clamping range from 3 to 32,5 mm can be covered. - For applications where you need to insert and seal pre-assembled cables with connectors into housings - Tool-free entry and connecting technology for machines and equipment - Temperature range -30 °C to +100 °C - Protection grade IP65 - UL 514B - 12 different frame combinations with 16 sizes of grommets (accessory) - Click-in assembly at wall thickness from 1,5 - 2,0mm - For walls with thickness larger 2,0 mm the KADL can be fixed with standard screws

Request for a quote

Germany

Verified by Europages

The WADI rail cable gland made of nickel-plated brass is the perfect cable entry solution for railway and low temperature applications down to -60°C. Features: — large-area sealing protects the cable — integrated anchorage with high retention — wide sealing and clamping range — for cables from 3 to 53 mm — the inner sealing ring can be removed easily for larger cables — high UV, ozone and weather resistancy — halogen-free — temperature range -60 °C / +100 °C (dynamic) — protection grade IP 66 / IP67 / IP69 — material of sealing insert fulfils superior claims on fire protection according to UL 94 V-0 and EN 45545-2, R22: HL3 / R23: HL3 — with metric thread from M12 to M63

Request for a quote

Germany

Verified by Europages

The PERFECT EMC-cable gland made of nickel-plated brass is the perfect cable entry solution for shielded cables to ensure trouble-free operation of electrical devices and systems. Features: - quick and easy EMC Connection - integrated anchorage for cables - wide sealing and clamping range - for cables from 3 to 48 mm - temperature range -20 °C / +100 °C (dynamic) -40 °C (static, short term) - Protection grade IP68 - 5 bar - Test standard UL 514B

Request for a quote

Germany

Verified by Europages

The Cable Entry Plate KADP is used to insert and seal cables in enclosures, machines and control cabinets. It provides a high flexibility for varios applications. KADP is perfect in tight spaces, as several cables can be inserted into the plate. Due to the ideal placement of the close-fitting insertion points, a high packing density with a protection grade of IP66 is achieved. The installation of the KADP into the enclosure is time-saving, by simply snapping the plate in with a single click. The cables are simply plugged in and the job is done. The "pushout" membrane re-seales almost by itself after removing the cable.

Request for a quote

Request for quotes

Create one request and get multiple quotes form verified suppliers.

  • Only relevant suppliers
  • Data privacy compliant
  • 100% free
Filters

Results for

Electric equipment - Import export

Number of results

632 Products