Electric lifting equipment - Import export

CA 400 P - Universal portable electric lift suitable for any vertical lifting for safe work. For the installation of cassette, air conditioning, duct or other load Load capacity 150 kg - Lift height 4 m Lightweight portable device Immediate use on site Put into action without any tools Only 2 elements: the mast and the plate With 4 individually adjustable feet Use on stairs or sloping ground Special foot kinematics for working close to the wall (UPTER system) 230 V mono electric motor Variable speed at will Integrated torque limiter Manual use possible in the event of a power failure using the crank provided

BD 400 is the universal portable electric lift for raising heavy loads safely. Thanks to its unique construction, lifting loads as close as possible to a wall is also possible It is the lifting device suitable for all construction sites or workshops Thanks to its very small footprint and low weight, it can be easily transported for immediate use. Mast with aluminum anti-twist rails Only 2 elements: the elevator and the lifting accessory Immediate use on site, activated in a few seconds without tools 230 V single-phase electric motor with speed variator Possible use in the event of a power outage using the crank provided (or battery-powered screwdriver) Integrated torque limiter, cuts off lifting in case of overload Easy transport on site thanks to transport wheels Stabilizer with adjustable length wheels By design, the feet are placed in front of or behind the mast (for facade work)

BD 400 is the universal portable electric lift for raising glass or windows Thanks to its unique construction, lifting loads as close as possible to a wall is also possible. It is the lifting device suitable for all construction sites or workshops Thanks to its very small footprint and low weight, it can be easily transported for immediate use.

for raising the height of glazing on a veranda roof. Portable device for immediate action on site.

Portable electric plate lifter for raising any plasterboard or placo up to a height of 5.2 m. Avoids physical fatigue and is 10 times faster than a manual plate lifter.

CM 520 - Portable electric lift, load capacity: 140 kg up to 3 m 130 kg at 4 m 90 kg at 4.9 m Low weight portable device - only 38 kg Immediate use on site Put into action without any tools Only 2 elements: the mast and the plate With 4 individually adjustable feet Use on stairs or sloping ground Special foot kinematics for working close to the wall (UPTER system) 230 V single-phase electric motor Variable speed at will Integrated torque limiter Manual use possible in the event of a power outage using the supplied crank or screwdriver on batteries

"CM 340 universal portable electric lift suitable for any vertical lifting for safe work. For the installation of cassette, air conditioning, duct, awning, pergolas or other load Lightweight portable device Immediate use on site Put into action without any tools Only 2 elements: the mast and the plate With 4 individually adjustable feet Use on stairs or sloping ground Special foot kinematics for working close to the wall (UPTER system) 230 V mono electric motor Variable speed at will Integrated torque limiter Manual use possible in the event of a power failure using the crank provided.

Numerically-controlled hydraulic press brake, numerically-controlled hydraulic shearing machine, numerically-controlled machining centres, numerically-controlled lathes and milling machines, mortising machines, presses, drilling machines, rolling machines, semi-automatic welding station, TIG/Plasma/Oxycutting workstation, paint booth, assembly workshop (mechanics, hydraulics, pneumatics, electrics, automation), lifting equipment, testing and programming workstations, etc. With our diverse range of facilities and modular covered areas, we can manufacture practically any type of installation or equipment, with unlimited space and technological expertise. Our multidisciplinary team of highly qualified specialists, combining long-standing experience with the technical skills of youth, guarantees the optimal operation of our equipment and the quality of the facilities delivered to you.

In addition to being able to work on site in an emergency to diagnose an unexpected breakdown and repair your installation, we are equipped with: a comprehensive machine fleet (numerically-controlled machining centres, lathes and milling machines, mortising machine, press, drilling machines, rolling machines, semi-automatic welding station, TIG/Plasma/Oxycutting station) meaning that we can manufacture products to measure and supply all your replacement and wear parts in an emergency an assembly workshop (mechanics, hydraulics, pneumatics, electrics, automation), lifting equipment and testing and programming stations, where mechanical and electrical assemblies and sub-assemblies can be produced urgently and with a high degree of flexibility

BATTERY LIFTER FOR BOXES AND REELS FP PS 04 E - LOAD 400 kg Lifter with manual pushing and lifting with electro-hydraulic pump, allows to lift loads (axis, bags, containers, minipallet, etc.) with maximum weight of 400 kg up to a height of mm. 1510. The elevator FP PS 04 E is compact and easy to handle. Is equipped with polyurethane wheels of large diameter for a high smoothness (two fixed and two steerable complete with brake). It is supplied with loading forks with a length of 650 mm. The battery 12 V-80 Ah. without maintenance, combined with the robust engine and control electronics with overload protection ensures safe and reliable operation. The battery charger is integrated.

SEMI-ELECTRIC LIFTER MOD. FPE 150 A/200 H Manual traction and electric lifting, suitable for lifting loads weighing up to 150/100 kg. up to a height of 1500/2000 mm. Practical and easy to handle with manual traction and electric lifting, the mod. FPE 150 A is able to lift loads with maximum weight of 150 kg to a height of 1500 mm, while mod. FPE 200 H lifts loads up to 100 kg to a maximum height of 2000 mm. The small size and light weight makes it suitable in shops, workshops, offices, kitchens, etc.. The battery 24 V-12 Ah. maintenance free, combined with a robust motor and electronic control with overload protection ensures safe and reliable operation. The battery charger is integrated. To ensure maximum safety, the lifting system is equipped with fall arrester belt.

Introducing the K3100 Electric Roll Lifting and Handling Equipment from KEDY – the ultimate solution for safe and efficient handling of rolls of material in your facility. With a maximum load capacity of 1100 kg, the K3100 is able to handle even the heaviest of rolls with ease. Its state-of-the-art clamping system, featuring jaws and arms, can easily adjust to accommodate rolls of different sizes and weights, ensuring a secure grip and safe movement every time. It also features a user-friendly control system that allows for easy operation and automation, increasing productivity and reducing the risk of operator error. Safety is of the utmost importance to KEDY, and the K3100 is no exception. It is equipped with a range of safety features including emergency stop buttons, load limiters, and sensors, ensuring the safety of the operator and those around the equipment at all times. Upgrade your material handling operations with the K3100 Electric Roll Lifting and Handling Equipment!

MANUAL TRACTION LIFTER WITH BATTERY LIFTING SERIES FPTX SEMI-E - shipped fully assembled! The price shown includes 1 battery 12V or 24V and high-frequency charger Practical, handy and high quality forklift. The forklifts FPTX series are featured with manual advancement and electric lifting. Their great stability is suitable for lifting very heavy loads safely. The version FPTX 12 is equipped with the standard polyurethane wheels, for maximum smoothness even with higher loads and 24 Volt batteries. Operating conditions 0-40 °C Degree of electrical protection IP 20 Available in the following versions: FPTX 1009 max. load 1000 kg, lift height 810 mm FPTX 1016 max. load 1000 kg, lift height 1510 mm FPTX 1020 max. load 1000 kg, lift height 1910 mm FPTX 1225 max. load 1200 kg, lift height 2410 mm FPTX 1229 max. load 1200 kg, lift height 2810 mm FPTX 1235 max. load 1200 kg, lift height 3410 mm

PLIERS FOR DRUMS MOD. DL FP 350 The clamp DL 350 for drums used to lift quickly and safely metal drums Lt. 200 and diameter mm. 600 and maximum weight of 350 kg. The pantograph structure for weight effect applied closes blocking with a strong grip on the drum board. The pliers can be attached directly to a crane or you can attach to the forks of a forklift truck using appropriate lifting straps (not supplied). If you use a forklift we recommend pairing with forks hook MKFP 1000.

When it comes to hygiene, the stainless steel lifter meets the rigorous requirements of food, cosmetics, chemical and pharmaceutical production (IP66). This is due to its elaborately electropolished surface finish that permits only minimal particle adhesion. Thanks to numerous manual and electric lifters, the E300 can be used for a wide range of applications, including handling drums, tubs and vessels up to a height of 2.35 metres. For example, it can be used as an efficient reel lifter with a boom or roller grab, as a drum tipper or for stacking crates using a fork. The E300 lifter makes it possible to grip, lift, turn and tip very heavy loads of up to 300 kg. The E300 is also equipped as standard with a removable battery unit and antistatic ESD wheels to prevent discharge.

Made of electropolished stainless steel, the INOX 200 handles loads of up to 200 kg. It was specially developed for industries with rigorous requirements in terms of cleanliness and hygiene (IP66) and is therefore frequently used in the pharmaceutical and food industries. The model can be equipped with electric or manual tools, for example to move reels, Euro stacking containers or barrels – depending on the lifting task in question. All tools for the INOX 200 are made of pure stainless steel.

The INOX 90 is your perfect aid in sensitive work areas that have rigorous standards in terms of hygiene and the cleaning of production equipment (IP 66). With a capacity of up to 90 kg total weight, this stainless steel minilift reliably lifts, moves and transports goods from A to B in your containers. The properties of the INOX 90 are crucial for a smooth manufacturing process – especially in the production of food, cosmetics and medicine. Overload protection, a safety coupling, various shields for all moving parts and an accurate charge indicator also contribute to enhanced safety. The INOX 90 has electropolished surfaces and all tools are made of pure stainless steel. You can adjust its speed to two different levels by remote control.

When the going gets tough, the IMPACT 200 is the most reliable and durable lifter. This is because it effortlessly copes with of up to 200 kg total weight. And with amazing stamina, too. Thanks to its exchangeable batteries, it can work 24 hours a day for you without loss of power. We have designed a range of electrical and manual tools for really heavy tasks, and you can configure these as required. You can easily move reels or drums by remote control for example, according to your choice. This not only makes your processes more fluid, it also gives you a whole new level of flexibility in terms of the efficiency of your existing production processes. In addition, you can choose the right mast height, undercarriage and platform to suit your operations.

If there's something heavy to lift somewhere, the IMPACT 130 is certainly a reliable help. The IMPACT 130 is a powerful lifter that easily lifts loads of up to 130 kg for a variety of lifting tasks. Not for nothing is it the most popular lifter in our entire product range – and a great support in day-to-day work and manufacturing processes. For added protection and comfort, the IMPACT 130 is equipped with overload protection, a safety clutch and a soft start function for easy operation. For more specific requirements, the IMPACT 130 can be customised with a choice of five mast heights, different leg types and different wheels.

The IMPACT 90 is not only the fastest lifter in this product range, it is also one of the most resilient. Designed for maximum daily use, it effortlessly moves, lifts and transports objects weighing up to 90 kg. The lifting speed easy to regulate by means of a handy remote control. To protect your employees and colleagues, the IMPACT 90 has overload protection, a safety clutch, shielding for all moving parts and a battery indicator for better planning capability. Configure the fastest Impact lifter according to your needs with a versatile selection of lifters, trolleys and mast heights.

The IMPACT 80 is designed to lift and move a wide range of different objects, including reels, boxes, cartons and crates with a total weight of up to 80 kg. The particular feature out this lifter is that it works almost silently. In order to enable even more prolonged use, it has a built-in charger and battery indicator. One for (almost) everything: thanks to its quick-change adapter, you can use a wide variety of tools with just one lifter, allowing flexible deployment at the workplace. This makes your daily work processes even more efficient and cost-effective.

The battery-powered IMPACT 70 lifter is incredibly versatile. With its wide range of applications, it makes work processes more efficient, ergonomic and safe across many industries. It effortlessly moves, lifts and transports goods weighing up to 70 kg. Its "Commander" push-button control unit is easy to understand and can be operated from any position. For increased safety, the IMPACT 70 is additionally equipped with overload protection and safety clutch, and you can combine it with four different leg types, three mast heights and more than 15 different tools.

When it comes to handling large and heavy paper, cardboard and plastic reels, COMPACT is the right choice. The smallest battery-operated lifter on the market features a combined boom with wheel for easy lifting of rolls up to 100 kg and a rotating V-block for special reels with axle up to 60 kg. A cost-effective alternative for those who like to keep things simple. This ensures your reels are transported safely from A to B – and all the way to the packaging machine (perhaps better: further processing machine?). Our COMPACT lifter is a simple, self-explanatory lifting solution, specially developed for the printing and packaging industry. And it’s so simple: pick up the reel on the boom or the V-block, run to the machine, apply the brakes and then comfortably push the roll from the boom or V-block into the machine.

Three identical vacuum lifting devices to lift and transport precast concrete piles at the outside storage facility in the United Kingdom. The Aerolift vacuum lifters ensure fast, efficient, and safe handling. Expected time saving of 70%!

Mounting rails used for assembly of modular equipment, wires and cables. Bars ideally meet installation requirements and harmonize with the interior. Steel mounting rails are applicable in a wide range of home and industrial installations. Product application: - assembly of electrical modular equipment and other electrical and electronic devices. - lighting assembly

We produce different electrical connections in pure copper, aluminium bronze, tin and lead bronze as well as brass. Pieces are delivered as-cast, rough or fully machined.

The medium voltage switchgear with double bar system is designed for the primary distribution on the medium voltage part of transformation stations from the power distribution systems and combines the new technologies with the existing infrastructure. The medium voltage switchgear with double bar system is an indoor electrical equipment, in metallic compartments cabinet, with insulation in the air, being formed of a vacuum breaker and air bar separator.

The Electroalfa primary distribution switchgear are designed for 7,2 and 24 kV rated voltages and rated currents up to 4000 A. Compliant with the technical standards of nationwide power generation, transport and distribution companies such as Transelectrica (the national transmission operator), CEZ Group, E.ON Group, Electrica Group (area distribution operators). The Electroalfa switchgear for primary distribution, of the S 12xx range, for a maximum voltage of 12KV c.a., have been tested for values of the continuous rated current of up to 5,000A and values of the rated peak withstand current of 50 KA/ 1s. This type of gear withstands the action of the internal electric arc, with a classification index of up to IAC AFLR 50KA, 1s. The switchgear from the range of S 24xx, for a voltage of 24 KV c.a. have been tested for values of the continuous rated current current of up to 2.500A and values of the rated peak withstand current of 25 KA/ 1s.

The 400/230 Vac and 48…220Vdc auxiliary services cabinets are designated to supply the low voltage consumers within the 110/20(6)kV transformer substations of the power supply and distribution companies: Electrica SA, CEZ Group, ENEL Group, E.ON Group; Transelectrica’s 400/220/110kV connection and transformer substations; hydro power plants; thermal power plants.