Electric submersible pumps - Import export

Submersible motor pumps from oddesse are applicable for water supply, irrigation, drainage and dewatering. They convince by their high-quality materials and long maintenance-free running periods. EXECUTIONS - Multi-stage submersible pumps in sectional or jacket design with radial or semi-axial impellers - Rewindable, water-filled motors - Discharge nozzle with pipe thread or flange - High-quality materials for application in service, industrial, geothermal and seawater PERFORMANCE RANGE Delivery volume Q = ... 1200 m³/h Delivery height H = ... 600 m

https://www.sumpas.com.tr/sumpas-pump-motor_4_c_en.html

• Class: F • Frequency: 50 Hz. • Outer Diameter: 141 mm • Motor Power Range: 5,5 HP - 60 HP • Axial load carrying capacity: 20 kN in 5,5HP-30 HP motors and 26,6 kN in 35HP-60HP motors • Based on 6" NEMA standards • Starting: Direct and Star-Delta • Supply Voltage: ~3, 380/415 V (-%6+%10), • Motor protection: IP 68 Mechanical Seal • Submersion depth: Standard upper limit • Temperature of working environment: Max. 30º C • Speed of cooling water around the motor: Minimum 16 cm/sec.

General QJ/QJR Submersible Borehole Pump (Deep Well Pump) designed for pumping clean water from deep wells, rivers, reservoirs and mines etc., as well as applications in industrial water supply , agricultural irrigation projects. Fire fighting and so on. QJR is specially designed for geothermal applications featured by heat-resisting, anti-corrosion and anti-aging properties, water temperature up to 90℃ Construction & Features Compact vertical centrifugal multi-stage design with perfect standardization and generalization, easy operation and convenient maintenance. A complete electric submersible pump includes a water pump set, electric motor, a discharge piping, water-proof cable and a control panel. Submersible motor filled with clean water for cooling and lubrication. And the pressure regulation switch, located at the bottom of motor, shall automatically operate to balance the pressure fluctuation caused by temperature variations.

Villina-GNVCP-2T type vertical electric semi-submersible pumping units are designed for transit in stationary conditions of neutral, corrosive, toxic, as well as explosive and fire hazardous liquids, the vapors of which can form explosive mixtures with air. These are used in gas, petrochemical, petroleum refining and other industries. The vertical semi-submersible pump – the pump part is fully or partially in the pumped liquid. The unit consists of a pump part, drive sections, a base plate, a device that transmits torque from the drive, an electric motor (drive). The ground part comprises a console fastened to the base plate, an electric motor mounted and fastened to the console, and a mechanical seal support system fastened to a base plate. The semi-submersible part comprises drive sections fastened to the base plate, an elastic coupling body connected to the lower drive section, a pump connected to the elastic coupling body and a discharge line.

C26 single cavity rotary vacuum filter for cyclical processing with filter aiding precoat. The almost total elimination of the unused portion is the most important innovation,guaranteeing: • Significant reduction of the amount of air drawn in • An increase in the drying surface, meaning higher output The filter in stainless steel shows numerous innovations: • Hydrodynamic system to keep the pre-cake suspension homogeneous, thereby limiting the interspace between the tank and drum • Pulp input by means of an electric reversible positivedisplacement pump • Filtered fluid drawn off by means of a submersed electric pump • Pulp deposit on the drum surface regulated by an impeller • Thermostatic control ensures low water consumption for the vacuum pump liquid ring Especially effective in the wine-making sector for filtering grape must in its natural state or after enzymatic treatment and recovery of the liquid part of the dregs from decanting, centrifugal processing and first racking

Cemp offers custom-made solutions. The main customers are the chemicals industry, pharmaceutical industry, power plants and minings. Further fields of application are the on-shore- and off-shore plants as well as the shipbuilding industry. The name Cemp stands everywhere for guaranteed security against explosion of dangerous dusts and gasses . We supply from our existing stock Kalefeld cemp- flameproof motors / hazardous motors Exd(de) IIC T4 in frame size 63, 2-poles up to frame size 160, 2-poles (0,18 – 18,5 kW) and frame size 63, 4-poles up to frame size 180, 4-poles (0,12 – 22 kW). All motors on stock are with Ptc thermistors. Other frame sizes and versions are available within 2 -8 weeks after receipt of order . Cemp Explosion Proof Motors / hazardous motors available in IE1 and IE2 High Efficiency Flameproof Electric Pumps for Printing Machines Series AT Submersible centrifugal electric pumps Ex-d, Ex-de Head up to 8m Output over 300l/min Stem length from 170 to 550mm Series XT - Detachable motor from the pump unit Submersible centrifugal electric pumps Ex-d, Ex-de Head up to 4m Output over300l/min Stem length from 170 to 550mm

The B80 KME series was developed as a wet-installed centrifugal immersion pump for stationary use in tanks and basins. The direct-coupled pump with plain bearings is suitable for pumping and circulating neutral and chemically aggressive liquids in the chemical industry and process engineering, in electroplating and surface technology, in washing systems and water treatment plants, for sump drainage in industrial and municipal waste disposal plants or as a circulation pump in gas scrubbers and heat exchangers. * with various plain bearing designs * available in immersion depths from 600 - 1500 mm Features & Advantages * Compact dimensions * Abrasion resistant material combinations possible * Extremely low-vibration and low-wear operation * All wetted parts made of corrosion resistant plastic * Self-centering alignment in the bearing shell

When circulating chemicals and pickling baths, reliability, safety and last but not least functionality are important. The submersible centrifugal pump was specially developed as a vertical, wet-installed pump for the rapid emptying of these liquids from tanks and basins. * available in special immersion depths on request * equipped with self-lubricating, liquid-wetted plain bearings. Features & Advantages * High flow rate * High efficiency * Smooth running * Low space requirement * Easy commissioning * Easy to maintain * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌

Pre-assembled progressive cavity pump kit with progressive cavity pump VISCOPOWER F 570 and planetary gear for food and pharma to pump thin to medium viscous media up to 25.000 mPas out of 200-l drums and IBCs. The pump is especially designed to meet the specific requirements of the food, cosmetic and pharmaceutical industries and works with little turbulences, at constant pressure and ensures a smooth, pulsation-free pumping. Comprising Eccentric worm-drive pump F 570 in 1000 or 1200 mm, Commutator motor F 458-1, Stator housing, Stator, Hose, Discharge spout, Hose connection and compression gland.

The pump-kit MINIFLUX is designed for emptying IBCs via their floor-level outlet. Designed as an alternative to a vertical pump, the MINIFLUX can be used when an IBC is not accessible from the top. It is suitable for applications when gravity draining via the outlet tap is insufficient e.g. rapid dispensing or transfer to another container in a higher location. Power can ideally be provided by a commutator or compressed air motor. Product attributes: - For pumping out of IBCs directly from the outlet (with standard S60 x 6 thread) - Simple connection of the pump to the outlet by union nut - Compact design - Can be dismantled into two parts via clamp - Low overall weight of 1.2 kg - No need to mount pump to top of container - Does not require access to the container from above - Ideally combined with commutator motor or compressed-air motor Benefits: - Can be used where ceilings are low - Allows pumping directly from floor-level outlets, even when containers are stacked

The small drum pump JUNIORFLUX with fixed motor FEM 3070 is especially suitable for pumping comparably small quantities out of containers such as canisters or drums of up to 200 litres. The small outer tube diameter allows pumping even out of narrow openings. The pump kit consists of pump with motor, 2 m hose and hand nozzle. Product attributes: - Sealless in the liquid area - With mains connection - Powerful commutator motor with brushes - Ergonomic design handle - Low weight - Small outer tube diameter - Holding hook for hand nozzle at pump discharge - With integrated holder for the pump Benefits: - Also suitable for transferring smaller quantities - Can pump out of narrow-necked containers - Minimal force required to change drums - With mains connection - enables very long operating times - High operational safety due to overload cut-out switch - Easy single-hand operation - Hand nozzle always quickly at hand due to holding hook - Low storage space required

Pre-assembled pump kit to pump different media out of 200 l drums (immersion length 1000 mm) or IBCs (immersion length 1200 mm). Comprising drum pump F 430, outer tube in stainless steel, hose, hand nozzle and compression gland. Driven either by commutator motor F 460 or compressed-air motor F 416. Product attributes: - Pump with mechanical seal - Pump can be taken apart without tools into two parts Benefits: - Easy disassembly - Universally and flexibly applicable - Easy to clean as no medium can get into the inner tube - No carrying-over of the medium - one pump can be used for different media - Also for adhesive media - Also for liquids that crystallize or harden

Pre-assembled progressive cavity pump kit with progressive cavity pump F 570 and planetary gear for industrial applications to pump thin to medium viscous media up to 30.000 mPas out of 200-l drums and IBCs. The positive displacement pump works smoothly at a constant pressure and ensures a gentle, pulsation-free pumping. Comprising Progressive cavity pump VISCOPOWER F 570 in 1000 or 1200 mm, Commutator motor F 457, Stator housing, Stator, Hose, Discharge spout, Hose connection and compression gland.

Pre-assembled pump kit to pump high flammable media out of 200 l drums or IBCs. Comprising drum pump F 424, outer tube in stainless steel, hose, hand nozzle and compression gland. As drive either the commutator motor F 460 or compressed-air motor F 416 are available. Product attributes: - No seal in the liquid area - Ex protected - Free from wear - Relief openings provide the same fluid level inside the pump compared to the drum content Benefits: - Non-sensitive to dry-running - No seal wear - No bearing wear - No contamination of the medium from lubricants or wear of seal materials possible - Medium cannot be contaminated by lubricants - Low wear and maintenance - Built to last - For use in hazardous area - Motor also available with speed control

Pre-assembled pump kit for food and pharma in ex-version. The pump-kit is ideal for frequent medium changes and is suitable for conveying out of drums, IBCs or tanks. Due to the construction with mechanical seal, the pump can be easily and quickly taken apart into its two main components. This allows good cleanability. Comprising drum pump FP 430 Ex FOOD, outer tube stainless steel, commutator F 460 Ex, hose, hand nozzle, hose connection, compression gland and earth cable. Product attributes: - With mechanical seal for sealing the inner tube - Pump can be disassembled into two parts: inner tube cpl. and outer tube - Grease-lubricated shaft bearing Benefits: - Ideal for frequent medium changes, hardening media, fast drying media, crystallizing media - Can be taken apart into main components easily and quickly for cleaning - Compared to sealless pump higher service life on abrasive media - Appropriate for food contact acc. to EC 1935/2004 and FDA CFR 21

Pre-assembled pump kit to pump foaming agents, low concentrated acids, low concentrated alkalis of 200 l drums (immersion length 1000 mm). Comprising drum pump F 430 with mechanical seal, material outer tube polypropylene, commutator motor F 458, hose, hand nozzle and compression gland. Product attributes: - Pump with mechanical seal - Pump can be taken apart without tools - Inner tube with steel core - prevents longitudinal changes at high or low temperatures Benefits: - Easy disassembly - Universally and flexibly applicaple - Easy to clean as no medium can get into to inner tube - No carrying-over of the medium - one pump can be used for different media - Also for adhesive media - Also for liquids that crystallize or harden

Pre-assembled pump set for pumping concentrated acids from 200 l drums (immersion length 1000 mm) or IBCs (immersion length 1200 mm). Comprising drum pump F 430 with mechanical seal, outer tube in polyvinylidene fluoride and commutator motor F 458, hose, hand nozzle and compression gland. Product attributes: - Pump with mechanical seal - Pump can be fast and without tools disassembled into two parts - Steel core in the inner tube prevents longitudinal changes at high and low temperatures - Robust motor with aluminium housing and special corrosion-resistant painting - Motor is completely closed Benefits: - No medium gets into the inner tube of the pump - No carrying-over of the medium - one pump can be used for different media - Pump can be quickly and easily cleaned - No corrosion on motor due to aggressive vapours

The universal Drum pump with mechanical seal F/FP 430 can be used for various media and is suitable for conveying out of drums, IBCs or tanks. Due to the construction with mechanical seal, the pump can be easily and quickly taken apart into its two main components. This allows good cleanability. Distinct feature, only at FLUX: The inner tube is reinforced with a metal core on plastic models (PP and PVDF). This always allows full function of the mechanical seal. This way, leakage and unnecessary wear are prevented for the complete operating temperature range. Furthermore, it provides highest stability and makes immersion lengths of up to 3 000 mm possible. The versions in stainless steel and hastelloy C are ex-protected. The stainless steel version is also available as FOOD certified version.

The sealless Drum pump F/FP 424 is ideal for transferring various low-viscosity, also aggressive media. It is suitable for media that flow quickly and neither bond, crystallize nor are abrasive. With this pump you can empty drums, IBCs and also basins. Distinct feature, only at FLUX: The specific construction with spiral-shaped guide bearing in the inner tube prevents unwanted deposits in the pump and increases the service life significantly. The pump is available in stainless steel, polypropylene or polyvinylidene fluoride. Benefits: - No seal wear - Optimal emptying of the inner tube - High service life - Low wear of guide bearing and shaft - Long life circle of bearings - Particularly suited for hydrochloric acid and chromic acid - Can be temporarily operated against closed valve (hand nozzle, valves etc.) until the indicated temperature of the materials is reached - Stainless steel version for use in hazardous area

Pre-assembled pump kit for 99,98 % drum emptying. Due to integrated backflow stop less than 0.05 l residual amount in 200 l drum possible. For pumping thin media out of 200 l drums (immersion length 1000 mm) or IBCs (mmersion length 1200 mm). Comprising drum pump F 425 with mechanical seal, outer tube in stainless steel, commutator motor F 460, hose, hand nozzle and compression gland. Can also be used in hazardous areas. Product attributes: - Pump with mechanical seal - Switch lever to close the backflow valve / foot valve - Pulsation-free transfer - Transfer against closed valve (e.g. hand nozzle) possible - Radial shaft sealing ring prevents intrusion of vapours and liquids into the coupling area Benefits: - Less than 0.05 l residual amount left in 200 l drum - Universally and flexibly applicable - Reduction of cleaning and waste disposal costs - Optimal use of fluids - No loss of medium when taking the pump from drum to drum

Pre-assembled pump kit to pump cleaning agens and disinfectants out of 60 l hobbocks. Comprising drum pump F 424, outer tube in polypropylene with commutator motor FEM 4070. Fume gland to protect operator and environment of dangerous vapours. Furthermore, hose and hand nozzle are included. Product attributes: - With fume gland - Immersion length 800 mm - No seal in the liquid area - No contamination of the medium by lubricants - Free from wear - Relief openings provide the same fluid level inside the pump compared to the - drum content Benefits: - No risk of vapours escaping - Immersion length adjusted on 60 l hobbocks - Optimum centre of gravity - the container does not fall - Non-sensitive to dry-running - No seal wear - No bearing wear - No contamination of the medium by abrasion of sealans - No contamination of the medium by lubricants - Low maintenance - Built to last

The Drum pump F/FP 427 is ideal for hygienic applications and suitable for conveying media out of drums, IBCs and other containers. It can be easily and quickly disassembled for cleaning / sterilization and can be completely stripped down to individual parts. The pump has minimal dead spots. The drive shaft, the inner and the outer tube are made of stainless steel (316 Ti resp. 1.4581). The pump is also available as FOOD and 3A certified version and complies with international safety standards. Benefits: - Ideal as hygienic pump - Can be quickly and easily taken apart for cleaning - All parts in contact with the medium can be sterilized - Transfers also fluids containing solids such as juices with pulp or soups with spices - Available with different connection at the pressure side (e.g. Clamp 1 1/2" or RD 58x1/6) - Available with 3A Certificate - Available as FOOD version - Appropriate for food contact acc. to EC 1935/2004 and FDA CFR 21

The small drum pump COMBIFLUX with removable motor FBM-B 3100 is particularly suitable for pumping comparatively small quantities from containers such as cans or up to 200 litre drums. The small diameter of the outer tube allows pumping even out of narrow openings. The pump kits consists of pump with motor, 1,5 m hose and hand nozzle. Product attributes: - Connection motor and pump via quick-action coupling - Sealless in the liquid area - Small outer tube diameter - Holding hook for hand nozzles at the pump discharge - Low weight Benefits: - Motor easy to remove - Several pumps can be operated in series with one motor - Also suitable for filling smaller quantities - Can transfer from narrow-necked and containers difficult to access - Minimal force required to change drums - Hand nozzle always quickly at hand due to holding hook - Low storage space required

The horizontal Drum and container pump F 430 TR is ideal for conveying media from IBCs, tanks and other containers with low level outlet. E.g. if a tank is not accessible from the top, or if the spatial conditions do not allow use of a vertical pump. For cleaning, the pump can be easily and quickly taken apart in its two main components. The pump is available in stainless steel or polypropylene. The stainless steel version can also be used in hazardous areas. Benefits: - For containers with floor drain - Provides highest flexibility in installation and mobility - Can also be used at low ceiling heights - Stainless steel version for use in hazardous areas - Can also be integrated into pipe systems - A horizontal centrifugal pump that can be used with different FLUX motors