Fire detection and alarm equipment - Import export

Body and Cover : GG-25 Cast Iron / Handwheel: GG-25 Cast Iron / Gasket: EPDM / O-ring: EPDM / Spindle: Stainless steel / Segment Gear : GG-25 Cast Iron . ** Connection Type: Flanged / Working Pressure :175-300 PSI / Working Temp.:-10ºC , + 120ºC / Working Test Pressure : 600 PSI *** NRS gate valve is developed to be used as the cut off and zone control valves in order to substitute supervisory switched butterfly valves and OSY rising stem valves in the fire security systems. These valves are usually burried underground to prevent the risk of freeze. Just to make them visible and traceable inside the systems, they are preferred to be used with post indicators instead of wheels. **** Application Areas: In fire fighting systems, which is non-affected by freeze, than they are using under the soil.

Body and Cover : GG-25 Cast Iron / Handwheel: GG-25 Cast Iron / Gasket: EPDM / O-ring: EPDM / Spindle: Stainless steel / Segment Gear : GGG-40.3 Ductile Iron. ** Connection Type: Flanged / Working Pressure :175-300 PSI / Working Temp.:-10ºC , + 120ºC / Working Test Pressure : 600 PSI *** OS&Y gate valve is developed to be used as the cut off and zone control valves in order to substitute supervisory switched butterfly valves in the fire security systems. Just to make them visible and traceable inside the systems, they are preferred to be used with post indicators instead of wheels. **** Application Areas: It can be use in every fire fighting systems, but it usually use in water tank and in front of the pumps.

Body and Cover : ASTM A-536 Cast Iron / Valve Inner Parts: Bronze ASTM B61 / Pilot Control Valve and System: Bronze ASTM B62 w / Stainless Steel 303 Inner parts / Valve diaphragm: Buna-N neoprene ** Connection Type: Flanged / Pressure :16-25 Bar / Working Temp.:+4ºC , + 80ºC *** Increases the system equipment life and save the water in tank which is used for unnecessary operations. These valves are used to reduce the pressure which is over the limits on the system. **** Application Areas: After hydraulic calculations, If any pressure adjustment is needed, pressure reducing valves are suitable.

Body: ASTM A-536 Cast Iron / Valves : Bronze Surface covered with Teflon, Stainless steel Trim Set / Pilot control valve and system: Bronze ASTM B62 and Stainless steel 303 inner parts ** Connection Type: Flanged / Pressure :16-25 Bar / Working Temp.: +4ºC , + 80ºC *** This valves using for the preventing damages which cause from the pressure in fire pump systems. Generally fire protection systems use the diesel pumps and electrical motors. In that systems relief valves are preferred. **** Application Areas: In systems which has diesel or electrical high pressure fire fighting pumps.

This fire alarm control panel meets NFPA requirement. It should be installed, commissioned and maintained by suitably qualified service personnel. Description: 1. It has 16 zones and 4 sounder outputs. 2. It has 3 standard FORM-A relays contact for alarm, fault, supervisory. And it has EIA-485 port for communication with remote delay and repeater panel. 3. It works with conventional N/O contact input devices including 2 wire, 4 wire smoke detector, heat detector, gas detector and call points etc. 4. It can be programmed by panel keypad. It is supervised all wiring, AC voltage and battery level. 5. It is required to be connected to power earth and it self checks earth fault. 6. Max.20 detectors can be equipped in one zone. Each zone can be disabled separately. 7. Output circuits: 24V resettable power output 1000mA 24V Nonresettable power output 1000mA 24V battery charger (up to 18AH battery) https://vedardalarm.

Run with 24Vdc (+/-10%) supply Relay contact output Long maintenance-free service life

Arch Fire Systems provide design, installation, commissioning and maintenance of self-activating Fire Suppression Systems for businesses across Plymouth and the South West, serving areas in Devon & Cornwall from Land’s End, right through to Barnstaple.

Generally supplied with adjustablre keeper plate (S01), a release button and a protection circuit. Available with holding force 50kgs or 100kgs, 24Vdc standard.

Long range and wide field of view Long life and durability Full adjustable mounts Fast response Low maintenance required Easily connects to system Customization to suit your needs Reliability and 5-year warranty

Excellent false alarm immunity Wide field of view Through lens optical check 4-20 mA and relay ouptuts as standard 4-20 mA Hart option SIL 3 Certified

Fire Sprinklers * PENDENT TYPE SPRINKLERS / UPRIGHT TYPE SPRINKLERS / SIDEWALL TYPE SPRINKLERS / SQUARE COVER PLATE ** Materials: Brass / Orifice: K80(5,6), K115(8,0) / Response : Standard and Ouick / Activation Temp.: 57ºC , 68ºC, 79ºC, 93ºC, 141ºC / Connection Dia.: 1/2'', Working Pressure: 175 PSI (12,1 Bar), Connection Type: Thread (NPT) *** Application Areas: Residences / Hotels / Hospitals / Business Centers / Hostel / Shopping Centers / Parking Areas / Garages / Factories / Storages etc.

This tool is used by home owners, commercial maintenance staff, and fire safety inspectors. With the Smoke Detector Pole you can make testing your smoke detectors safe and easy. No more ladders, brooms, sticks, or inconvenience. Created by a housing inspector, the patent pending design makes it possible for anyone to test smoke detectors quickly and with ease. Max. Pole length is 5m Easy to use,all the parts in one case Smoke testing pole for fire alarm system https://vedardalarm.com/smoke-detector-testing-instrument-fire-system-inspection-p-246 Fire security system maintenance tools. https://www.vedard.com/forum/fire-extinguish-fighting-system-control-fire-t346.html

Overground Fire Hydrant / Body, Lower and Upper Pipe: GG-25 Cast Iron / Coupling: Aluminium Alloy / Handwheel : GG-25 Cast Iron / Disc : GGG-40.3 Ductile Iron / Check Valve: Brass / Upper shaft : Stainless Steel / Shaft motion pipe: Galvanized steel or Stainless Steel ** Application area: Fire installations

Body: ASTM B-536 Nylon- 11 Coated / Gear Box: ASTM A-536 / Disc: ASTM B-356 EPDM Encapsulated / O-Ring: EPDM / Handwheel: ASTM A-536 / ** Connection Type: Flanged or Grooved or Threaded / Working Pressure: 300 PSI ( 20,6 Bar ) / Working Temp.: -10ºC , +120ºC / Working Test Pressure: 600 PSI (61,8 Bar) *** It is identified as a local control valve. It is used as a shut-off valve on water feed lines to disconnect (control) in-situ zones. A butterfly valve or rising stem valve is used to shut off or control. the position of all valvesused in fire systems should be visible and electrically traceable. Butterfly valves are of a gearbox handwheel type. The supervisory switch of a butterfly valve are located inside the valve and there is an on/off indicator on it. **** Application Areas:Residences / Hotels / Hospitals / Business Centers / Shopping Centers

Body: Ductile Iron / Stem,Springs: Stainless Steel / Disc: Brass or Aluminium or Bronze / Disc gasket or Disc washer : EPDM / ** Connection Type: Flanged or Grooved / Working Pressure: 300 PSI ( 20,6 Bar ) / Working Temp.: -10ºC , +120ºC / Working Test Pressure: 600 PSI (61,8 Bar) *** The wet alarm valve is designed for applications where the water is unlikely to freeze. The water staying pressurized in the pipes is released over the fire area after the sprinkler is activated due to fire. The pressurized water system is not only feed contionuously, but also fills in the retard chamber. After the chamber is filled, the pressure switch on the chamber is actuated. The pressure switch sends the alarm information to the fire warning system or the automation system. After the pressure switch is actuated, the water is delivered to the water-motor gong and releases a mechanical alarm.

Test and Drainage Valves / Body: Brass ( Forged ) / Ball : Brass / Gasket : PTFE ** Connection Type: Threaded or Grooved / Working Pressure: 300 PSI ( 20,6 Bar ) / Working Temp.: -10ºC , +120ºC / Working Test Pressure: 600 PSI (61,8 Bar) *** In sprinkler systems, these valves are used for the testing systems and drain the unnecessary fluids from the systems. Advantages: They have sight glasses in their body,single valve is sufficient to drain the line. For choosing the test and drain valves, users should pay attention to line diameter. Also these valves have to have same diameter with the sprinkler orifice diameter. **** Application areas: The system where has sprinkler systems.

Connection Type: U bolt or Threaded / Working Pressure: 400 - 450 PSI / Working Temp.: 0ºC , +49ºC. ** In wet pipe systems, generally pedal type water alarm switches are used for informing users 4-10 gpm water flow has started. Water flow switches are used in Aqueous and foam fire extinguishing systems. They are used in only wet pipe systems. Because of the dry contact feature it appears on the control panel. Flow switches are suitable for the using in indoor and outdoor. *** Application area: All wet pipe lines

Combined disabled refuge EVC, disabled toilet alarm, fire telephone and building alarms system, controlled and monitored from a single fire panel sized enclosure. All control boards, PSUs, batteries, etc. mounted inside the monitoring station. Simply connect mains and outstations for a complete system. Saving money, installation cost, space etc. Remote monitoring and third-party interfaces over serial / IP / fibre available

Our Fire Telephone System is designed to help you meet the requirements of BS5839 (Code of Practice for Emergency Voice Communications Systems. With cable fault monitoring, standby battery power supplies, provision for heavy fire resistant cabling etc. The system is also designed for easy installation, loop through cabling, easy configuration, easy operation. Reducing costs for you and your clients.

Folknoll's vandal resistant, BS 5839‑9 compatible, disabled refuge EVCS offers cost-effective solutions for shops, offices, hotels and other public spaces. Our range of outstations, master stations and control equipment enables us to construct a system to suit your requirements including photoluminescent outstations, Braille annotation, induction loops, vandal resistant master stations, third-party interfaces, etc. We can even combine our disabled refuge systems with fire telephones, emergency assistance / disabled toilet and other building alarms to provide great solutions for smaller sites.

Arch Fire Systems Ltd are experts in their field, conducting essential professional Fire Risk Assessments for businesses in Plymouth, and the South West, serving areas in Devon & Cornwall from Land’s End, right through to Barnstaple.

Every business has a duty to provide training to nominated Fire Wardens, to protect and help prevent loss and damage to property and persons. Arch Fire Systems deliver professional Fire Safety Training in Plymouth, Devon & Cornwall, from Land’s End, right through to Barnstaple.

Arch Fire Systems are skilled and proficient in the design, installation and maintenance of Emergency Lighting for commercial business needs across Plymouth and the South West, serving areas in Devon & Cornwall from Land’s End, right through to Barnstaple.

Our knowledgeable electrical engineers at Arch Fire Systems are accomplished in the design, installation, commissioning and maintenance of Fire Alarm Systems in Plymouth, Devon & Cornwall, from Land’s End, right through to Barnstaple.

Arch Fire Systems has solidified its position as a leader in the provision of Fire Systems. Through its bespoke design, installation, maintenance and training services, along with its commitment to standards compliance and customer satisfaction, our company effectively promotes fire safety.

The Fire Thermal Infrared (FireTIR) detection system is based on fixed infrared cameras which measure the viewed surface temperatures in real time and connect to a user friendly software interface.

Ensure that you’re protected with the highest quality fire detection and extinguishing facilities with the help of the London City Fire & Electrical Group. Our team is experienced in every facet of fire alarm system design, installation, and service. All fire detection and alarm systems must be regularly serviced in order to highlight any potential faults and to provide the preventative maintenance that keeps them reliable for the foreseeable future. Let us help you ensure you’re giving your fire safety systems the care they need. In order to make our services as accessible as possible, we offer a free quotation, as well as a price match guarantee to provide you with more value than anyone else in the industry.