Clamping systems - Import export

Flange plate, piston and body rust-resistant, bright. Screws electro zinc-plated. Collet red or clear anodised. Note: Machinable collet system with base plate for mounting on 50mm pitch grid plates. The flange plate can be used for external or internal clamping collets. The contour of the workpiece to be clamped is machined into the collet. Free-form and asymmetrical contours can be clamped. The integrated spring package generates a clamping force of 5.8 kN. The clamping force can be raised to 43.5 kN by pneumatic post-clamping. The clamp is released by blowing compressed air onto the lower piston surface pushing the piston upwards and releasing the clamping force on the collet. Clamping travel 0.2 mm. Repeat accuracy < 0.01 mm. Accessory: Collet for external or internal clamping 03179

The easy operability and rapid adjustment using a scale means that the clamping jaws can be quickly and surely adapted to new workpieces The workpiece is always centred through the systematic construction of the 5-axis compact clamping system. The optimal accessibility to the workpiece allows short, standard tooling to be used. Tooling costs are significantly reduced. Positive down force by a clamping depth of >5 mm. Clamping widths of 20 mm to 320 mm are possible. Assembly: The 5-axis clamping system compact can be mounted on T-slot tables, grid systems or, using an adapter flange on conventional zero-point clamping systems. Accessory: Seating ledge 41345 Jaw plates 41320 Pendulum jaws 41325 Centre jaws 41335 Coupling for cross-clamping 41365 Order the seating ledges and jaw plates with pins separately.

Our EasyGel Protect® coring solutions guarantee you a dusting <to 10f / L. This performance is achieved in compliance with the product instructions, in a regulatory operations and adequate staff training. The solution is suitable for all types of dust harmful or not (Asbestos / Lead / Silica / Dusts,…). SPECIFICATIONS • Transparent core tube with decontaminable accessories and its equipment. BENEFITS • Cheap Solution • Easy to use • Reproducible operating mode • Clean Site • Protection of operators and their environment

Comby is a tablet-controlled 2-in-1 dot peen marking machine with wireless communication between the marking head and its control unit. Easy to use, the application lets you create and modify marking files in just a few clicks. Comby is a combined machine. It takes less than 10 seconds to switch from one configuration to another, and no tools are required. The workbench configuration enables small parts up to 295 mm high to be marked. The compact, all-in-one column base features universal grooves that allow multiple clamping systems, such as a rotating D-axis, to be fitted. In portable mode, the 22V lithium-ion battery in the head guarantees lightness, performance and durability. In addition, the portable control unit enables the operator to carry out indoor and outdoor marking on large parts. The marking head is equipped with a multifunction support foot to hold the head on the workpiece and to mark on small and large cylinders or at the end of the bar.

Graphix Plus is an all-in-one laser marking station equipped with an electrical door (manual control) with an opening of up to 580mm. It has a large loading capacity and can be used to mark small to medium-sized parts. The X-axis is motorised, allowing the head to move vertically, giving a marking zone 475mm long. The marking head with on-board camera allows you to view the rendering and position the marking on-screen, thanks to the Smart View function. There's no need to move the part to ensure that the marking is correctly positioned; it adapts to the part, as everything can be controlled from the screen. Its ergonomic software developed by Technomark is very easy to use. It has a materials database, enabling marking to be done in just a few clicks. The station has a 250x225mm opening on the left-hand side for marking long parts. Its aluminium plate with universal T-slot allows various clamping systems to be fitted, such as a rotating D-axis for marking cylindrical parts.

Locating cylinder tempered, black oxidised. Balls hardened, bright. Note: Locating cylinder with quick-clamp system for extra timesaving during setups. Insert the locating cylinder into the receiving hole and press the button. The three balls are pushed out and position the components. By tightening the set screw a 1/4 turn using an hexagonal key, the components are positively and securely held.

The 5-axis vice features excellent stability and flexibility, and is extremely easy to use. The 5-axis vice can be used as a positive-down force vice or normal vice. When the positive down force function is used, the workpiece can be held with a repeat accuracy of ±0.01 mm. A workpiece clamping height of 180 mm enables easy access during machining. The clamping width is preset using the crank handle, cutting down on setup times. Additionally, the closed geometries and the resistance to dirt that they provide keep maintenance and repair times to a minimum.

The screw is tightened or the clamping lever is turned to expand the two wedges in the hole. The infinitely adjustable shaft collar enables one or more stop elements with various thicknesses to be securely fixated. Application: These clamping pins are perfect for fixing standard stop elements with various thicknesses to hole grid boards / welding tables with hole Ø 16 mm or 28 mm. Advantages: Infinitely adjustable clamping range of 0-36 mm and 0-75 mm. Not affected by the diameter or surface quality of the bore (up to H12). Clamping range can be easily preset using the scale. Gentle clamping in the bore. Pull-down effect even with thin table material (≥8 mm or ≥4 mm). Compatible with conventional stop elements.

It is recommended that the cam lever is in a vertical position when the collet is positioned in the bore. The function of the clamping system was tested in bores with tolerance H7. All values for retaining force are guide values and are given without safety factor. The suitability for the respective application must be checked by the user. Advantages: Two components can be joined together without tools. The components are perfectly centred in the clamped state. The compact design means that the mandrel collet with cam lever can even be used in blind holes. There are no specific dimensional requirements for the holes. Additionally, the surfaces and design do not need to have any specific properties. Functional principle: The clamping system is inserted in the hole in the open state. At the beginning of the locking process, the mandrel collet expands and clamps itself in the lower component. The integrated disc spring assembly creates a positive down force

Steel 1.0037. Aluminium EN AW-6060. Version: Steel electro zinc-plated. Aluminium anodised. Note: The machined tolerances of these round and square tubes are individually matched to the tube clamping system. *Square aluminium size 10x10 are only available as solid bars. On request: - Custom cut length (L max. 5000 mm) - Stainless steel tube (L max. 3000 mm)

Housing hardened and black oxidised. Contact faces ground. Note: This positioning and clamping system is especially suitable for installation in fixtures (plates, clamping tower blocks, etc.) in all mounting positions. The modular design allows the number of and distance between the locating cylinders to be ideally adjusted to suit the clamping task. Due to the small diameters, the spacing between the locating cylinders can also be reduced. The 3 clamping balls are mechanically released through control of the locating cylinder with the "opening" connection. The 3 clamping balls move inward and the fixture can be changed quickly. For clamping, the air is taken from the "opening" connection and the "clamping" connection then receives air on the locating cylinder. The 3 clamping balls are mechanically driven outward again and the new fixture is clamped. To achieve optimal retaining force, the locating cylinder remains connected to the air.

Grippers and inserts are ideal for use in clamping arms, gripping systems, clamping fixtures, clamping jaws and self-aligning pads. The use of grippers allows the transfer of very high torque values and above average grip, even with hard materials and surface irregularities. Form O: The abrasive diamond surface is bonded firmly to the base. It is ideally suited to supporting smooth or slippery applications with a minimum of clamping pressure. This allows the diamond particles to get a firm grip on a very small area with minimum damage to the surface. The diamond surface offers excellent wear resistance. Form P: The polyurethane surface is vulcanised firmly to the ball. It is abrasion-resistant and does not discolour. It offers optimum protection against damage to delicate surfaces. The pearl-like surface gives a firm grip and allows air to escape so as to prevent any suction effect between the contact surface and the self-aligning pads.

Pneumatic clamps have the following advantages compared to hand clamps: The operator is relieved of frequent clamping. Several clamps can be activated at the same time and can be closed in a specific sequence. Single or multiple clamps can be activated from varying positions by machine control or hand control. Because of the toggle system: the clamp remains closed if the air supply fails. the air consumption is low due to the large end ratio. pivoting the clamping arm achieves a large opening travel. optimum force and movement ratios are achieved. VL = air consumption per complete cycle in dm³ at 6 bar. Selection criteria: To select the correct size of pneumatic clamps, the possible clamping force at 6 bar (any compressed media are permissible, maximum pressure 10 bar) is specified besides the retaining force. F3 is the possible clamping force that the clamp exerts on the end of the clamping arm, F4 the force it exerts on the fulcrum side.

The TYC2RT compression press allows the production of rubber mouldings with compression moulding or vacuum compression. The twoplate in/out with 45° inclination of the upper plate is suitable for various options. They are particularly suitable for moulding Orings, pharmaceutical stoppers, syringe plungers, and many other rubber parts. They are available in 2RT or 3RT series depending on the number of plates in the mould. Equipped with a 4post clamping system with high precision parallelism, their adjustable opening stroke allows different mould heights. The vacuum bell system reduces the curing time, thus increasing productivity.

Feeding system for powder paint Description CUSTOMER'S BENEFIT Design without retention for optimal color changes Strength of the body thanks to the clamping, no deformation Easy to use, quick maintenance and no special tools required Access to the ejector without removing the tip of the powder hose Quick air coupling connectors with colorcoding and dissimilar Metal body and injector allowing solvent rinsing The conductive output tip improves the evacuation of the triboelectric charges thatmay be generated Quick clamping system with a uniform distribution regardless of the number of powder pumps

From the innovators of welding automation, Miller Weldmaster presents the i4500W Series of Indexing welders. This recipe driven curtain producer will enable your operator to easily finish your vertical webbing and vertical seams effortlessly. After the fabric is placed on the automatically driven table, the welding head will advance to the start position and finish all of the vertical webbings hands free. All webbing are pre fed, pre cut, and precisely positioned with no measuring. Speed, versatility, precision and labor reduction... the model i4500W. ALSO AVAILABLE To weld horizontal webbings on truck curtains. To weld anti vandalism webbings. SPECIFICATIONS, FUNCTIONS AND BENEFITS Throat capacity available in 4.5m to 14m Independent Quad heat system Automatic rotary webbing cutter Miller Weldmaster PLC Smart Screen Custom indexing clamp system High speed hot air welding technology Power friendly worldwide

From the innovators of welding automation, Miller Weldmaster presents the i6500W Series of Indexing welders. This recipe driven curtain producer will enable your operator to easily finish your vertical webbing and vertical seams effortlessly. After the fabric is placed on the automatically driven table, the welding head will advance to the start position and finish all of the vertical webbings hands free. All webbing are pre fed, pre cut, and precisely positioned with no measuring. Speed, versatility, precision and labor reduction... the model i6500W. Also available To weld horizontal webbings on truck curtains To weld anti vandalism webbings SPÉCIFICATIONS, FONCTIONS ET BÉNÉFICES Throat capacity available in 6.5m to 14m Independent Quad heat system Automatic rotary webbing cutter Miller Weldmaster PLC Smart Screen Custom indexing clamp system High speed hot air welding technology Power friendly worldwide