Taps - Import export

Brass 1/4 turn meter tap CW614 / 617 MAIN FEATURES - Brass body - Prison nut secured by a hole for sealing wire - HDPE side sealed by compression and secured by a hole for sealing wire - A.C.S. certified product

Brass vertical inlet tap MAIN CHARACTERISTICS - Brass body, compliant with standard NF EN 1216X - Cast iron operating square (30 x 30 mm) - Nickel-coated brass ball - Boss: male thread - Metric pitch (PB or GB) - PFA (Permissible Operating Pressure): 16 bar - PEA (Permissible Test Pressure): 24 bar

These precision dovetail slides find use in e.g. machine and fixture construction, metrology, optical instruments and fine mechanics. The stated permissible load rating (F) is for static loads. The torque values only apply for centred carriages. TI = number of fastening holes E1/E2/MI inside. TA = number of fastening holes E/E1/MA outside. TM = number of centring holes D1 inside. TN = number of centring holes D1 outside. Advantages An additional centring hole is located at all tapped holes. Other connecting elements can be precisely mounted on the slide in combination with our centring rings 20240. Quick and retrofit combination in the X, Y and Z axes.

Housing, steel. Magnetic core NdFeB (neodym). Protective rubber jacket, synthetic rubber. Housing, electro zincplated. Black protective rubber jacket. Shallow pot magnets with tapped pin, shielded system. With rubber protective jacket for protecting sensitive surfaces. The coefficient of friction is increased by the rubber jacket so that high lateral friction is achieved. magnetic face 2) magnet 3) rubber

Self-tapping threaded inserts for making high-strength, wear-free, vibration resistant screw connections in materials with low shear strength such as aluminium and aluminium alloys, brass, bronze, cast iron, duro and thermoplastics. The threaded inserts are tapered at the bottom and have a cutting slot. By screwing in they cut their own threads inside a receiver hole. This guarantees a completely secure and firm anchoring in the host material. Internal thread D1 acc. to ISO 6H. The threaded inserts with cutting slot spring slightly inwards in the slot region in some materials. This results in a screw locking effect. If this is not desired, we recommend the threaded inserts with a cutting bore.

Brass or cast iron body Cast-iron operating square (30 x 30 mm) Nickel-coated brass ball

Cast iron inlet tap with stopcock MAIN FEATURES - Body in cast iron FGL or FGS - Cast iron operating square (30 x 30 mm) - Nickel-coated brass ball - Boss: male thread - Metric pitch (PB or GB) - FSH or FAH shut-off - PFA (Permissible Operating Pressure): 16 bar - PEA (Permissible Test Pressure): 24 bar

Brass side inlet tap MAIN CHARACTERISTICS - Brass body, compliant with standard NF EN 1216X - Cast iron operating square (30 x 30 mm) - Nickel-coated brass ball - Boss: male thread - Metric pitch (PB or GB) - PFA (Permissible Operating Pressure): 16 bar - PEA (Permissible Test Pressure): 24 bar

Blue or black For inlet and outlet taps Pre-cut door

The tabernacle is used to protect the taps. FGL or FGS cast iron body Protection against corrosion For inlet and shut-off valves

Differential pressure flowmeter with upstream pressure tap located at a distance of D from the upstream face of the orifice plate and downstream pressure tap located at a distance of 0.5D from the upstream face of the orifice plate.

Drillstar taper taps and die collars are manufactured from high-grade alloy steel and cemented to ensure the highest strength. They are available in a wide range of sizes, and can be equipped with different types of guides. Taper Taps Plain type Drillstar taper taps are either plain or fluted, with four longitudinal grooves which allow the easy evacuation of cuttings. The hardened cutting teeth (wickers) are available with either right-hand or left-hand spiral. Over a meter in length, the taps offer two particular advantages : First, they can be screwed into the washover subs, thus allowing the tap to be guided by an external tube. Secondly, due to the fine tapering of the threads, the tap can be screwed further into the fish head and will accept considerable pull without releasing the fish. Skirted type For difficult fishing operations, Drillstar Industries has developed a skirted taper tap. This rugged tool is composed of 3 pieces : 1.A taper tap with an upper pin thread. 2.A sk

Plastics : PTFE, PTFCE (VOLTALEF®), PA 6.6, PVDF …

Integrated machine shops to limit the number of times parts are handled, from casting to final assembly. Traditional operations such as drilling/flaring/tapping, boring, facing, etc.