Chains - Import export

Connecting links for DIN ISO 606 duplex roller chains. By Form E, the spring clip must be mounted with the closed end facing the direction of movement. Offset links are required to close the chain if there is an odd number of links. Using offset links reduces the power and tensile strength by 20%.

Packaging unit 5 metres with odd number of links. Ending with an inner link at both ends. Connecting links must be ordered separately. Note Europeantype roller chains acc. to DIN ISO 606 with curved link plates (ISO No. 06 with straight links). All chains are prestretched. Initial lubrication anticorrosion mineral based oil. B7 = maximum value for links. Pitch = PxB1

Packaging unit 5 metres with odd number of links. Ending with an inner link at both ends. Connecting links must be ordered separately. Note Europeantype DIN ISO 606 roller chains with curved link plates (ISO No. 06 with straight links). All chains are prestretched. Not lubricated, the chains must be lubricated depending on the application. The stainless steel roller chains offer excellent corrosion protection and good chemical resistance. They can be used in applications with water and at high temperatures. B7 = maximum value for links. Pitch = PxB1

Tensioner Vesconite® plastic. Screw and nut steel. Version Screw ISO 4017, grade 8.8, electro zincplated. Nut ISO 4035, grade 8, electro zincplated. Note For tensioning roller chains. The chain tensioner set can be combined with all tensioning elements to form a readytoinstall chain clamp. The symmetrical design enables use on both sides. Large radii ensure very quiet running. The highquality plastic does not require any lubrication. The maximum chain speed should not exceed 1.5 m/s in continuous use.

Chain clamps are used mainly in machine and plant construction. Chain clamps enable cylindrical, complicated and large to very large workpieces to be clamped securely and effectively in the quickest and easiest way. Suitable for cylindrical workpieces, valve bodies, pistons etc. The workpiece surface can be protected by attaching the plastic elements. Application: The knurled nut on the clamping bracket can be used to preset the chain length and the clamping force. The required torque is set on the clamping hook. Accessory: Steel roller chains for chain clamp sets 04211-03. Steel turnbuckles for chain clamp sets 04211-06. Steel prisms for chain clamp sets 04211-09. Nuts for T-slots DIN 508 enhanced, 07060. Cap screws DIN EN ISO 4762, 07160. Note: The opening angle of the chain should not exceed 30°. Do not exceed max. permitted tightening torques. Supplied with Chain clamp set 04211-15: Clamping hook. Clamping bracket.

Sprockets with hub one side for DIN ISO 606 roller chains. The sprockets have a centre bore or are predrilled (this can vary due to production methods). For this reason, the dimension D3 max. given in the table is the maximum diameter of the bore that the sprockets are supplied with. This pilot hole/centre bore can be customised with a reamed hole, reamed hole with keyway or a tapped hole by the customer. Alternatively, bushes can be fitted by the customer to reduce the diameter.

Polyethylene PEUHMW (ultrahigh molecular weight polyethylene). Glide rails for roller chains as defined in DIN ISO 606. These support and guide the roller chains on the return side, thus extending useful life by significantly reducing wear on the roller chains. They reduce vibrations and noise in the chain drive. These glide rails have high abrasion and wear resistance. They are maintenancefree, acidproof and have high chemical resistance. The additional C profiles are used for fastening to the system substructure and they protect the glide rails from lateral forces and torsion. Assembly The glide rails are pushed into the C profiles fastened to the system. The glide rails must be mounted so that the material is allowed to expand. A property of thermoplastic materials is that they expand or contract more than metals when there are temperature variations.

The angle bracket enables easy mounting of the clamping elements directly on the machine component. The bore D2 serves to hold the clamping element. The clamping element can be mounted on the front or rear of the bracket. The bores D3 enable the bracket to used for other applications.

Housing 1.4308 stainless steel, from size 5 1.4301. Clamping arm 1.4301 stainless steel. Buffer natural rubber. Screw stainless steel A2. Version Housing and lever arm bright. Screw ISO 4017, grade 70, bright. Note Clamping element with integrated highly elastic, shaperetaining natural rubber buffer. Together with a chain tensioner set, sprocket set or a tension pulley, the clamping element makes a readytoinstall tensioning unit suitable for tensioning chain and belt drives. Suitable for both tensioning directions. The clamping elements are maintenancefree and tearoff resistant. The clamping element is fastened to the machine component through a bore. If necessary, a heavyduty dowel pin can be inserted in the positioning notch “P” for torque support.

Sprockets for DIN ISO 606 roller chains. The disc sprockets have a centre bore or are predrilled (this can vary due to production methods). For this reason, the dimension D3 max. given in the table is the maximum diameter of the bore that the disc sprockets are supplied with. This pilot hole/centre bore can be customised with a reamed hole, reamed hole with keyway or a tapped hole by the customer. Alternatively, bushes can be fitted by the customer to reduce the diameter.

Ready to install sprockets with hub on one side for DIN ISO 606 roller chains. Teeth are milled and inductively hardened. Keyway acc. to DIN 6885 / BS 4235. The keyway is aligned with the tooth tip. With two grub screws. One tapped hole aligned with the keyway centre, the other offset by 90°.

Sprocket steel. Ball bearing chrome steel. Screw and nut steel. Version Sprocket teeth hardened to HRC 50, electro zincplated. Ball bearing with sealing discs 2ZC3. Screw ISO 4017, grade 8.8, electro zincplated. Nut ISO 4035, grade 8, electro zincplated. Note For tensioning roller chains. The sprocket set can be combined with all tensioning elements to form a readytoinstall chain clamp. The ball bearings are sealed both sides, permanently lubricated and maintenancefree. The sprocket can be moved on the screw and thus adapted to the chain track. With the duplex and triplex version, precision spacer sleeves ensure correct chain guidance. Rigid mounting without a tensioning element is also possible. Can also be used as an idler sprocket.

Steel C45. Grey cast iron GG22 from 38 teeth. Sprockets with hub one side for DIN ISO 606 roller chains. The sprockets have a centre bore or are predrilled (this can vary due to production methods). For this reason, the dimension D3 max. given in the table is the maximum diameter of the bore that the sprockets are supplied with. This pilot hole/centre bore can be customised with a reamed hole, reamed hole with keyway or a tapped hole by the customer. Alternatively, bushes can be fitted by the customer to reduce the diameter.

Sprockets with hub one side for DIN ISO 606 roller chains. The sprockets have a centre bore or are predrilled (this can vary due to production methods). For this reason, the dimension D3 max. given in the table is the maximum diameter of the bore that the sprockets are supplied with. This pilot hole/centre bore can be customised with a reamed hole, reamed hole with keyway or a tapped hole by the customer. Alternatively, bushes can be fitted by the customer to reduce the diameter.

Polyamide fibreglass reinforced. Version: Black. Note for ordering: The connecting elements are supplied in pairs. Note: The connecting elements are used to attach the two ends of the energy supply chain to the installation. Tension relief is integrated into the connecting element. The connecting elements are connected on the outer radius.

Polyamide fibreglass reinforced. Version: Black. Closed. Note: Energy supply chains for safe guiding of flexible electric and data cables as well as pneumatic and hydraulic hoses. The modularly constructed chains can be easily shortened or extended. The material is UV-resistant and therefore also suitable for outdoor applications. Technical data: Technical features in unsupported areas: Speed: 10 m/s Acceleration: 50 m/s²

Cable and housing PUR Contacts gold-plated bronze. Version: Bush (female) Voltage: U max. 60 V Current: I max. 4 A Terminals: 3-pin Security type: IP 67 Note: Plug connector with screw fitting. Plug encapsulated to cable.

Since 1903, STAHL, a pioneer in electric hoists, has been producing quality hoists, whether fixed with suspension hooks, with manual or electric trolleys. These hoists, globally recognized for their excellence, are designed for heavy-duty use, both indoor and outdoor. Main features: Protection: As standard, they offer IP 55 protection and are equipped with class F tropicalized motors, making them suitable for operation in humid conditions. A higher protection option, IP 66, is also available. Design: STAHL hoists are known for their compactness and reliability. For load 125kg to 6300kg. Special versions upon request : Low height electrical trolley stainless steel load chain hoists with 2 chain outputs ( for long loads) hoists for big bag