Friction-resistant - Import export

Multi-purpose oils that are neutral in odour and taste, suitable for the food, beverage, cosmetics and pharmaceutical industry. These fluids provide excellent lubrication and friction reduction.

The PLUS SYSTEM series of linear actuators consists of highly protected linear units featuring a self-sustaining anodized aluminum structure and a steel re-enforced driving belt. This is a line of exceptionally sturdy and high performance actuators in terms of load, moment control, speed and acceleration. High load capacity,High speed,Low wear and tear,Low friction,Low maintenance.Corrosion resistant version All Plus System series of linear actuators are available with stainless steel elements, for applications in harsh environments and/or subject to frequent washes. The Plus System linear units are made by using extruded anodized Anricorodal 6060 and 6082 aluminum, which houses bearings, linear rails, nuts and bolts and components made of low carbon SS AISI 303 and 404C steel, preventing or delaying corrosion caused by humidity experienced in the environments where the linear units are used.The PLUS SYSTEM series consists of 3 distinct products with different features: ELM,Robot,SC.

iglidur® J3: runs longer iglidur® J3 is our new material with increased wear resistance at low to medium loads and high speeds. The service life is up to 300% higher than in iglidur® J, the proven top endurance runner material. iglidur® J3 is available as cylindrical bearings and plain bearings with flange. Lubricants and maintenance-free Low coefficient of friction Good resistance to media Lowest humidity absorption PTFE free

iglidur® H4: The Automotive-Standard. Very cost-efficient high-temperature material with good dry-operation properties and "engine compartment resistance". iglidur® H4 is available as cylindrical bearings and plain bearings with flange. Low friction coefficient Best wear-resistance high temperature resistance -40 °C up to +200 °C

iglidur® H1: The endurance runner for high temperatures iglidur® H1 is the first choice when high holding times are required in extreme environmental conditions. Extreme wear resistance is coupled with excellent resistance to temperature and chemicals - not only in the packaging and foodstuff industries or the automotive industry. iglidur® H1 is available as cylindrical bearings and plain bearings with flange. High wear resistance in extreme ambient conditions Very low coefficients of friction High resistance to temperature and chemicals For applications in the engine compartment

iglidur® D: low cost material with silicon Low-cost-material with low coefficients of friction and good wear resistance at low loads. iglidur® D is available as cylindrical bearings and plain bearings with flange. Low coefficients of friction at high speeds For low loads Very cost-effective Vibration-damping Lowest humidity absorption

iglidur® R Low-cost-material with low coefficients of friction and good wear resistance at low to medium loads. iglidur® R is available as cylindrical bearings and plain bearings with flange. Good abrasion resistance Low coeffi cients of friction while running dry Very cost-effective Lowest humidity absorption

Diameter [mm]: length [mm]: Polymer bearings applications overview Polymere bearings application examples overview Polymer bearings applications overview iglidur® J4 - low cost and low wear Lubricant- and maintenance-free Low-cost-material for large volumes Low coefficients of friction Media resistant Lowest humidity absorption Diameter [mm]: length [mm]: Polymer bearings applications overview Polymere bearings application examples overview Polymer bearings applications overview

iglidur® L250: For fast rotations Bearings for fast rotary motions like, for instance, in fans and small motors. iglidur® L250 is available as cylindrical bearings and plain bearings with flange. specially developed for fast rotating applications Very low coefficients of friction Excellent wear resistance

iglidur® C500 Up to +250 °C, wear-resistant. iglidur® C500 can be used up to 250 °C, extremely media-resistant – including in cleaning processes with hydrogen peroxide – wear resistant, with low friction values. Also suited for a wide range of custom geometries or piston rings. High resistance to media and temperature Long-term service temperature +250°C Good coefficients of friction and wear Lubricant- and mainteance-free

Lubricant- and mainteance-free Easy to cut Adherent For compact areas Typical applications:Mechanical engineering, materials handling, fixture construction, installation technology, etc. iglidur® Tribo-Tape A180 Delivery program: iglidur® Tribo-Tape V400 Delivery program: Material: iglidur® A160 Low coefficient of friction Best wear-resistance Upto +100 °C Compared to similar thin plastic films, the cost-effective iglidur® A160 tape has a very high wear resistance. Material: iglidur® V400 Extremely wear resistant Highly resistant to media Upto +200 °C The extremely wear-resistant and at the same time very media- and temperature-resistant iglidur® V400 tape shows up to 10 times higher wear resistance in the test compared to special products for machine beds and the like. Lubricant- and mainteance-free Easy to cut Adherent For compact areas Typical applications:Mechanical engineering, materials handling, fixture construction, installation technology, etc. Wear rotating against stainless steel pin (1.4305) F= 35 N, v= 0.5 m/min Y = Wear/mass decrease [mg/km] A = PC | B = compound liner | C = PEEK D = PEEK mod. 1 | E = PEEK mod. 2 | F = PET G = iglidur® A160 Wear rotating against stainless steel pin (1.4305) F= 35 N, v= 0,5 m/min Y = Wear/mass decrease [mg/km] A = iglidur® V400 | B = PTFE bronze compound iglidur® Tribo-Tape A180 Delivery program: iglidur® Tribo-Tape V400 Delivery program:

iglidur® JATM, metric d1 [mm]: iglidur® JATM/VATM consists of a hard-anodized ring and a bearing ring made of iglidur® J (JATM) and iglidur® V400 (VATM). These glide pairings fetch low coefficients of friction and high wear resistance - without lubrication. Special features Maintenance-free plain bearing system For high service performances High stiffening Simple installation Material: iglidur® J High temperature options VATM, iglidur® V400 More dimensions and supplies on request When to use it? When an axial bearing system with defined gliding partners is desired When extremely high wear resistance is required When a very low coefficient of friction is desired When not to use it? When an additional angle compensation is required igubal® axial bearing When little mounting space is available iglidur® J When only sporadic movements are present iglidur® G Y = wear [μm/km] Figure 36.1: The diagram shows the influence of load (p in MPa) and speed (v in m/s) on the wear of the axial bearing. Y= Coefficient of friction Figure 36.2: In the test with different speeds (v) and loads (p) the coefficients of friction of the bearing systems were determined (v in m/s, p in MPa). iglidur® JATM, metric d1 [mm]:

Diameter [mm]: length [mm]: iglidur® W300 - Material data iglidur® W300 - The continuous runner for maximum holding times. iglidur® W300 - Material data Polymer bearings applications overview Polymere bearings application examples overview Polymer bearings applications overview iglidur® W300: The endurance runner For extremely high service life in continuous operation Low coefficient of friction extreme high wear-resistance Suited for rough shafts and stainless steel shafts Dirt resistant Diameter [mm]: length [mm]: iglidur® W300 - Material data iglidur® W300 - The continuous runner for maximum holding times. iglidur® W300 - Material data Polymer bearings applications overview Polymere bearings application examples overview Polymer bearings applications overview

igubal® spherical balls W..M/I Standard spherical ball - dimensional series K and E in metric and inch dimensions igubal® spherical balls W..M/I igubal® spherical balls R...M Low cost spherical ball - dimensional series K and E in metric dimensions igubal® spherical balls R...M igubal® spherical balls X...M Spherical ball for high temperatures - dimensional series K and E in metric dimensions igubal® spherical balls X...M igubal® spherical balls J...M, mm Spherical ball for low humidity absorption - dimensional series K and E in metric dimensions igubal® spherical balls J...M, mm igubal® spherical balls J...M, large dimensions, mm Spherical ball for low humidity absorption - dimensional series K in metric dimensions igubal® spherical balls J...M, large dimensions, mm igubal® spherical balls JKM-GT split, mm Splitted spherical ball for low moisture absorption - Dimensional series K in metric dimensions igubal® spherical balls JKM-GT split, mm igubal® spherical balls UWEM Spherical ball for underwater applications - dimensional series E in metric dimensions igubal® spherical balls UWEM igubal® clearance-free balls J4VEM, mm Clearance-free spherical balls through camber, dimensional series E igubal® clearance-free balls J4VEM, mm igubal® spherical balls J4...M, mm Low priced spherical ball - dimensional series K and E in metric dimensions igubal® spherical balls J4...M, mm igubal®-spherical balls RN248..M, mm Detectable spherical ball - dimensional series K and E in metric dimensions igubal®-spherical balls RN248..M, mm Every iglidur® material possesses a series of special properties which account for its suitability for certain applications and requirements. Currently we offer you spherical balls made of iglidur® materials W300 (standard), J, J4, R, UW and X. igubal® spherical bearings application examples Special properties: maintenance-free dry operation Corrosion resistant High compressive strength High elasticity Very low weight Various materials Spherical balls - material properties iglidur® W300 (Standard) – very wear-resistant material iglidur® R cost-efficient and low coefficients of friction iglidur® X resistant to temperature and chemicals iglidur® J low coefficients of friction and low humidity absorption iglidur® UW suited for underwater applications Tolerances Maintenance-free igubal® spherical balls are designed with a tolerance in the inner diameter according to E10. The shaft should have a tolerance between h6 and h9. When to use it? When maintenance-free materials are required When components of the dimensional series E and K should be used When different iglidur® materials should be tested When high compressive strength is required When high elasticity is required When not to use? When temperatures above +250°C prevail When dimensions over 50 mm are needed When rotation speeds in excess of 0,5 m/s should be implemented igubal® spherical balls W..M/I Standard spherical ball - dimensional series K and E in metric and inch dimensions igubal® spherical balls W..M/I igubal® spherical balls R...M Low cost spherical ball - dimensional series K and E in metric dimensions igubal® spherical balls R...M igubal® spherical balls X...M Spherical ball for high temperatures - dimensional series K and E in metric dimensions igubal® spherical balls X...M igubal® spherical balls J...M, mm Spherical ball for low humidity absorption - dimensional series K and E in metric dimensions igubal® spherical balls J...M, mm igubal® spherical balls J...M, large dimensions, mm Spherical ball for low humidity absorption - dimensional series K in metric dimensions igubal® spherical balls J...M, large dimensions, mm igubal® spherical balls JKM-GT split, mm Splitted spherical ball for low moisture absorption - Dimensional series K in metric dimensions igubal® spherical balls JKM-GT split, mm igubal® spherical balls UWEM Spherical ball for underwater applications - dimensional series E in metric dimensions igubal® spherical balls UWEM igubal® clearance-free balls J4VEM, mm Clearance-free spherical balls through camber, dimensional series E igubal® clearance-free balls J4VEM, mm igubal® spherical balls J4...M, mm Low priced spherical ball - dimensional series K and E in metric dimensions igubal® spherical balls J4...M, mm igubal®-spherical balls RN248..M, mm Detectable spherical ball - dimensional series K and E in metric dimensions igubal®-spherical balls RN248..M, mm

iglidur® W300: The endurance runner The specialist for extremely high wear resistance, also for rugged shafts or especially abrasive environmental media. Attain maximum holding times in your applications with iglidur® W300. Dimensions according to ISO 3547-1 and special dimensions. iglidur® W300 is available as cylindrical bearings, plain bearings with flange and thrust washers. For extremely high service life in continuous operation Low friction value Extremely high wear-resistance Suited for rough shafts and stainless steel shafts Dirt resistant

25 dimensions - ex stock iglidur® Plain bearing - Product overview New as standard range: iglidur® J4 is the new low-cost material for long lifetimes for low to medium loads. Zero lubrication, zero maintenance Low-cost-material for large volumes Low coefficients of friction Media resistant Lowest humidity absorption Bearings made of iglidur® J4 in a satellite receiving unit material data: iglidur® J4 Density 1,48 g/cm 3 Colour Gray Max. moisture absorption at 23°C and 50% r.h.: 0,3 weight-% Max. water absorption 1,3 weight-% Upper long-term application temperature 90°C Upper short-term application temperature 120°C Lower application temperature -50°C Bending E-module 2.350 MPa Max. surface pressure 35 MPa Surface resistance >10 12Ω 25 dimensions - ex stock

A specialized design combines an external cylinder with a cylindrical raceway and balls that are incorporated in the retainer, making rotary and linear motion in the axial direction possible simultaneously with rotational motion. Small Rolling Frictional Resistance Incorporating a ball with high accuracy into the precisely polished external cylinder results in small rolling frictional resistance and extremely smooth rolling motion together with reciprocal motion. Low Inertia Since the retainer has high rigidity and is lightweight, it has low motion inertia, making it suitable for rolling motion and reciprocal motion in highspeed operations. A Variety of Models Standard and heavy load models are available, each with different load ratings, and each offered with or without seals. It is easy to choose the right product based on the specifications of your machine or device.

A specialized design combines an external cylinder with a cylindrical raceway and balls that are incorporated in the retainer, making rotary and linear motion in the axial direction possible simultaneously with rotational motion. Super Precision After the raceway surface of the external cylinder and shaft are heat treated, they receive an ultraprecision finish and are set to zero or a slight preload state by incorporating high precision steel balls. This provides extremely high accuracy in both rotary and linear motion. Super Small Size Tiny balls incorporated in a thin external cylinder result in a very small diameter and small sectional height. Since each component is precisely ground and adjusted to ideal preload conditions, extremely smooth and stable operation with low frictional resistance over a long period of time is possible.

The IKO Miniature Linear Bushing is an extremely small linear motion rolling guide with a shaft diameter of 3 to 5 mm that performs endless linear motion in the axial direction while making rolling contact with the shaft. Cage, steel balls and stop ring are compactly built in the external cylinder, allowing high feed accuracy to be obtained. Since the steel balls are accurately guided by the cage, stable linear motion can be obtained with small frictional resistance. Compact Design The ultrasmall size allows for compact machine and device design. Wide Variation In addition to the standard type, the highrigidity long type has been serialized and can be selected according to the application. Stainless Steel Stainless steel types are also available, with excellent corrosion resistance and ideal for use in clean rooms, such as in medical equipment, various disc readers and semiconductor manufacturing devices.

The IKO Linear Bushing is a highprecision linear motion rolling guide that performs endless linear motion in the axial direction while making rolling contact with the shaft. Cage, steel balls, and the like are built compactly in the external cylinder. Models are available in abundant sizes and can be selected according to the application. Since the steel balls are accurately guided by the cage, stable linear motion can be obtained with small frictional resistance. Simple Replacement for Rolling Guide With the shaft used as the raceway, guiding parts using conventional bushings can be changed to rolling guides without major design changes. Wide Variation For each dimensional series, standard, adjustable clearance, and open types are available with and without seals, which can be selected according to the application. Stainless Steel Stainless steel types are also available, with excellent corrosion resistance and ideal for use in clean rooms, such as in medical equipment

The IKO Limited Stroke Linear Ball Spline G is a compact ball spline that achieves extremely smooth limited linear motion. By building the high accuracy cage into the limited stroke type with small recirculation resistance of the balls, a light and smooth motion with extremely small fluctuation of frictional resistance even in vertical shaft use has been achieved. High Rigidity and Precision at a Compact Size By adopting a structure in which largediameter steel balls are arranged in two rows in contact with the raceway at four points, it has achieved a compact external cylinder diameter with respect to the shaft diameter and high rigidity in all directions. Since an appropriate preload is provided, there is no clearance in the rotational direction and accurate positioning is possible. Supports Special Shapes We manufacture special shapes to meet the customer's uses, such as end machining and external cylinders with holders.

These are the Rolling Door systems in which the PVC Tarpaulin Curtain, which is wrapped around the aluminum shaft connected to the 380Vac motor, moves up and down rapidly in a channel. It ensures safe and fast traffic flow within the facility. In this way, it reduces the loss of time and energy in businesses. It provides 24/7 service with its European origin canvas resistant to friction and external factors and its long-lasting engine. Usage areas are shift facilities such as automotive, pharmaceutical and food. It combines PVC Tarpaulin and PVC Transparent window with high frequency welding machine. It provides maximum impermeability thanks to the double-sided rubber gaskets attached to the uniquely designed aluminum rails. It is compatible with hygienic environments with its monolithic PVC tarpaulin structure. It is compatible with many automatic access systems with its control unit and up-to-date security

Surface treatment with laser with a broad spectrum of applications (improved thermal conductivity, anti-icing / freezing, anti-friction, anti-wear, lubrication, anti-microbial, reduced electrical resistance e.g. for connectors, holograms, product protection, logos, wettability, increase surface area by up to 280% ...). Can be used for metal (steel, aluminum, titanium) polymers / plastics (e.g. polycarbonate), composite material and ceramics

Surface treatment with laser with a broad spectrum of applications (improved thermal conductivity, anti-icing / freezing, anti-friction, anti-wear, lubrication, anti-microbial, reduced electrical resistance e.g. for connectors, holograms, product protection, logos, wettability, increase surface area by up to 280% ...). Can be used for metal (steel, aluminum, titanium) polymers / plastics (e.g. polycarbonate), composite material and ceramics

Color: White, Blue Product name: Shoe Cover Application: Personal Care Feature: Breathable, Waterproof Packing: 10pcs/bag Style: Long shoe covers Keyword: Disposable PP Shoe Cover Item: Waterproof Shoe Cover

Disposable Boot and Shoe Covers- Best on the market for protection against slips, trips, and falls * Non slip protector- High coefficient of of friction, durable, water and skid resistant * Protectors overshoes- Cost saving solution when work/activity may ruin your shoe, boot, or medical boot * ISO Class 5 Compatible- Controlled clean room rating for manufacturing, biotech, pharmaceuticals, labs, paint booths, and more

The flow meter with display convinces with its simple, demand-oriented display, operability and compact design. Thanks to the rotating Oval gear meter and a magnet integrated in the measuring chamber, it enables the exact measurement of the volume flow and measures mineral oils and alternative fuels such as diesel, petrol etc. precisely, quickly and above all efficiently. * Media examples: Diesel, heating oil, hydraulic oil, machine oil and motor oil etc. * Quantity preselection can be retrofitted with a relay module at any time * Suitable for measuring alternative fuels Features & Advantages * Measurement according to the oval wheel principle * High measuring accuracy * Low pressure losses in the system * Measuring range from 3 l/min - 80 l/min * Low frictional resistance

Due to high surface hardness and low surface abrasiveness, it is characterized by good slip and good resistance to friction, does not dissolve and does not swell in all used solvents, in fuels and mineral oils. It is most often used for the production of precision machine parts, such as gears, worm gears, bushes, etc

Castrol Transmax Dual Multivehicle is a dual clutch transmission oil based on HC synthesis, which was formulated with Smooth Drive Technology™. This product is suitable for use in most dual clutch transmissions in the global vehicle fleet Transmax Dual Multivehicle's low viscosity formulation also offers fuel saving potential. Advantages Improved friction coefficient resistance for optimal transmission performance. Improved wear protection for longer component life. Excellent thermal and oxidative stability. Excellent synchronization and clutch performance thanks to balanced friction properties. High shear strength - constant viscosity throughout oil life. Proven performance in field trials.