Ac & dc - Import export

✓ Outdoor AC/DC UPS for extreme environments in robust aluminium housing with IP65 protection ✓ Already integrated LiFePO4 energy storage (330 Wh) ✓ Temperature range -20…+50 °C ✓ Intelligent input current regulation ✓ Regulated output voltage in battery mode ✓ Pressure compensation element to prevent condensation inside ✓ Input and output cable firmly installed ✓ IEC/EN 62040-1 certified ✓ Optionally available: mounting sets for masts AC-DC UPS with IP65 protection class for outdoor applications The UPSI-2406IP-38AC is an AC/DC UPS system with numerous digital features and a high performance. The UPSI-2406 is used with an upstream AC/DC converter and combined with an already integrated LiFePO4 energy storage. The primary use of the UPS is in bridging power failures and/or fluctuations. The application to be protected is connected to the output of the UPS. The device has IP65 protection and was specially designed for use under extreme conditions.

The power supply units of the PSU67 series are IP67 rated and can be mounted in the field. The devices bypass short power drops of maximally 50 independently. In addition, no-load and short-circuit protection as well as the passive air cooling increase the fail-safety of the devices. The output current is - depending on the type - 2 A, 4 A or 8A. Thanks to their universal AC/DC input, the power supplies can be used worldwide in numerous networks. The high efficiency of up to 90% provides a good energy balance.

The power supply modules of the IM82-24 series feed DC consumers and especially our IM, IMS and IMC interface modules with 24 V. The devices are mounted on DIN rail and meet protection class IP20. The output current is - depending on the type - 2.5 A, 5 A, 10 A or 20 A. Thanks to their universal AC/DC input, the power supplies can be used worldwide in numerous networks. Other features include high efficiency, as well as temperature resistance and dynamic overload capability.

The N480D-RRR is an efficient PID-temperature controller with an excellent price-performance ratio.

The N480D-RRR is an efficient PID-temperature controller with an excellent price-performance ratio.

The All-in-One module 2511 is predestined for use in automated manufacturing testing of high-performance battery modules and battery packs, regardless of whether they are round, prismatic or pouch cells. In single or multichannel mode, important battery parameters such as AC and DC internal resistance or cell voltage can be recorded and evaluated extremely fast and precisely using fieldbus-capable technology in order to make quality-relevant statements regarding ageing .............. FEATURES AC and DC internal resistance measurement 10 … 300 mΩ Four-wire measurement method for highest precision Measuring and evaluation results in a few milliseconds Frequency ranges: 1kHz, 100 Hz, 10 Hz, 1 Hz Voltage measurement: 0 ... ±5 VDC/±60 VDC Temperature measurement: 0 °C … +100 °C Resolution: up to 0.01 μΩ Single to multi-channel applications, temperature measurement Extremely compact design, state-of-the-art interfaces PC software for intuitive parametrisation and configuration

The amplifier module model 9243 is used wherever measurement signals from strain gauges, potentiometric sensors or DC/DC sensors have to be converted into standard signals. Simply by mounting on conventional DIN-mount rails, it is possible to position the amplifier module on location, in the proximity of the sensor. Especially for rough environments a IP65 version is available. The broad auxiliary power range and the choice between AC or DC permits operation on standard power supplies used in switch gear cabinets. A highly precise reference voltage source is built-in for calibration purposes. A calibrating shunt can also be connected via two separate terminals. This permits deliberate detuning of a strain gauge sensor for calibration or merely to check the measuring chain.

CSN® Current Sensors are used for current measurement in control and protection systems in power transmission links (AC and DC applications). The CSN® type Current Sensors are based on highaccuracy resistive sensors (shunt) respectively iron free cores (CSN® AirCoil). There are selfsupporting structures available where the CSN® Current Sensor is mounted on top of a composite insulator, as well as variants in which the CSN® Current Sensor will be mounted hanging in the busbar. Schniewindt has implemented CSN® Current Sensors for nominal currents of up to 5 kADC at system voltages of 800 kVDC, which have been successfully typetested. Also for the precise measurement of small currents (1 to 10 A), such as transient currents in capacitor banks, Schniewindt offers appropriate solutions. All of our CSN® Current Sensors are individually designed according to customer requirements.

Our small and industrial carbon brushes are used in many different power- and signal-transmission applications. How can we help you? The range of different dimensions and versions of small and industrial brushes is enormous: It's no wonder the quality products from MACK are used in many electrical tools, small motors, AC and DC motors, in the automotive field, and many other applications. With higher currents, such as in wind turbines and grounding systems, our metal graphite grades ensure optimum transmission. Our silver graphite carbon brushes are also used in marine shaft grounding and in signal- and data-transmission systems, for example, in tachogenerators. Do you want to make ordering small and industrial carbon brushes as fast and uncomplicated as possible? Then use our online MACK carbon brush configurator. With just a few clicks, your enquiry or order reaches us – and then is quickly sent on the way to you.

✓ Uninterruptible power supply (DC UPS) with integrated Li-Ion Battery ✓ Intelligent power sharing ✓ Regulated output voltage in backup mode ✓ Minimum load detection ✓ Power fail Timer-Function ✓ Relay dry contact on power fail ✓ USB & RS232 Interface ✓ Plug&Play - recognized as UPS by operating system ✓ Extended functionality by UPScom management software ✓ Shutdown & Reboot Function ✓ Fuel gauge ✓ Approved to IEC/UL/CSA 61010-1 / -2-201 ✓ 3 years warranty The DC UPS UPSI-2406DP1 with included energy storage has been designed for DIN Rail applications. The robust housing protects electronic parts against coarse pollution. The µC-controlled DC-UPS is based on the proven UPSI-technology and features numerous protective and monitoring functions as well as an integrated reboot function, which activates the auto-restart of the computer system, as soon as the input voltage returns during shutdown or later.

Representing the elegant fusion of art and nature, this piece of art is designed to add a unique touch to your home. Every detail of this iconic table has been carefully considered, offering a harmonious marriage of walnut and art. Our product is completely handmade and does not contain any chemical substances during the manufacturing process. Our artists have paid particular attention to the texture of the walnut wood and made their drawings by hand. Each work is decorated with our artists' original designs and there is only a single version. This work is the ideal choice to fill your home with a warm and natural atmosphere and to welcome your guests in an impressive way. This table, where nature and art come together, will not only create a special space in your home, but also bring the beauty of art into your life. Click here to see similar handmade table products.

The right drive solution for every challenge: Single-stage gear drive with hollow shaft — Gear Type: SN14H — Motor Type: Three-Phase (230/400V) and Direct Current (180/200V) — Ratios: 5; 7; 11; 15; 17; 20; 24; 30; 32; 38; 56; 75 — Motorpower AC: 45 - 120W / DC: 120-250W — Shaftdesign: Hollow Shaft — Max. permissible torques: 5,3-14 Nm — Effectiv torques: 0,6-14 Nm — Mounting: Gear Foot / Flange — Additional options: brake motors, UL/CSA-certification, thermal protection, encoder —Ratios Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

• According to IEC/EN 60 255, DIN VDE 0435-303 • Common alarm annunciator for 12 signals • 1 relay for common signal and horn • Inputs up to AC/DC 230 V • 1 connection for acknowledgement button of horn and lamp test • Width: 45 mm

• Common alarm annunciator for 6 signals • Optionally for up to 8 signals • Closed circuit operation • Optionally with open circuit operation • With LED for each fault signal • Inputs up to AC/DC 300 V • With relay output for common signal • Pushbutton for fault signal acknowledgement and function test • Front surface 96 x 96 mm

• New fault annunciation with single frequency flashlight according to DIN 19 235 • Expandable from 16 up to 160 inputs • in 2 groups of 8 inputs selectable: - open circuit operation - closed circuit operation • Input voltage up to max. AC/DC 240 V • Delayed inputs • Exchangable front for individual scale • Removable terminals • Flush mounting • Frame 72 x 144 mm

• According to DIN EN 61810-1, IEC/EN 60669-1 • Switching reliability according to IEC/EN 60669-2-2 • Safe separation according to IEC/EN 61140, IEC/EN 60335 • OB 5693: horizontal model OB 5694: vertical model • Bistable, mechanical latching of contact • For impulse operation, at failure operation 100 % ED possible • Same pulse (energy and direction) for both switching positions • AC and DC - model • Patent on function principle • On request wash proof

• According to IEC/EN 62 020, VDE 0663 • For AC and DC systems Type B, according to IEC/TR 60755 • To detect earth faults in grounded voltage systems • 4 setting ranges from 10 mA to 3 A • Manual reset, with alarm and pre-warning • With adjustable switching delay • Energized or de-energized on trip • LED indicator for operation, pre-alarm and alarm • With test function • LED-chain indicates fault current • As option with analogue output • Broken wire detection • Protection against manipulation by sealable transparent cover over setting switches • Width: 52.5 mm

• According to DIN EN 61810-1, IEC/EN 60669-1 • Switching reliability according to IEC/EN 60669-2-2 • Safe separation according to IEC/EN 61140, IEC/EN 60335 • OB 5693: horizontal model OB 5694: vertical model • Bistable, mechanical latching of contact • For impulse operation, at failure operation 100 % ED possible • Same pulse (energy and direction) for both switching positions • AC and DC - model • Patent on function principle • On request wash proof

• According to DIN EN 61810-1, IEC/EN 60669-1 • Switching reliability according to IEC/EN 60669-2-2 • Safe separation according to IEC/EN 61140, IEC/EN 60335 • OB 5693: horizontal model OB 5694: vertical model • Bistable, mechanical latching of contact • For impulse operation, at failure operation 100 % ED possible • Same pulse (energy and direction) for both switching positions • AC and DC - model • Patent on function principle • On request wash proof

— AC and DC sensors available — High switching frequencies up to 4000 kHz — Fully encapsulated versions to protection class IP67 — Sturdy metal or plastic enclosures — Temperature range: -25°C up to +70°C — Sensing distances: 2 mm to 8 mm — Cable / connector versions — 10 – 36 V DC or 76-250 V AC — PNP / NPN versions — NO / NC versions — Function indicators — Short circuit-proof versions — Versions with IO-Link

— AC and DC version sensors — Sensing distance / sensitivity adjustable with side potentiometer — Sturdy metal or plastic enclosures — Metal versions with Teflon front cap — Temperature range: -25°C up to +70°C — Sensing distances: 2 mm up to 13,5 mm — Cable / connector versions — 10 – 36 V DC or 20 – 250 V AC — PNP / NPN or AC versions — NO / NC versions — Short circuit-proof PNP versions — M18 with function/operating voltage indicator

— AC and DC version sensors — M32 with programmable output, PNP / NPN and NO / NC — M32 with relay output and timer version — Potentiometer-adjustable sensing distance / sensitivity — Sturdy metal or plastic enclosures — Metal versions with Teflon front cap — Temperature range: -25°C up to +70°C — Sensing distances: 10 mm up to 30 mm — Cable / connector versions — 10 – 60 V DC or 20 – 250 V AC — PNP / NPN or AC versions, relay output — NO / NC versions — Short circuit-proof versions — Function and operating voltage indicators

— Versions for flush and non-flush mounting — AC and DC sensors available — High switching frequencies up to 300 kHz — Fully encapsulated versions to protection class IP67 — Sturdy metal and plastic enclosure — Temperature range: -25°C up to +70°C or -40°C up to +100°C — Sensing distances: 10 mm up to 15 mm — Cable / connector versions — 10 – 36 V DC or 20-250 V AC — PNP / NPN or AC versions — NO / NC versions — Function indicators — Short circuit-proof versions — Versions with IO-Link

The HGF Handgausmeter is an easy to use precision instrument. The superfine 1mm probe magnetic flux densities can be measured extremely close to the magnetic pole and in very narrow air gaps. The HGF can be switched between AC and DC magnetic fields as well as between units Gaus and Tesla. At the edge of the display the pending polarity N/S is in the mode "DC magnetic fields" constantly displayed, the "peak indicator" facilitates the search for magnetic surfaces for example, in tracking down unwanted residual magnetism. The package includes in addition to the meter, the 1mm transversal probe and the batteries and a protective case and a protective cap for the probe. Thus, HGF is also suitable for use in the service industry. Our technicians use it for testing of heavy lifting magnets and clamping systems.

Description Product range StarLED Electrical features Voltage type AC/DC Voltage tolerance 10 % Rectifier Bridge Mechanical features Lamp size T-3 1/4 Socket BA9s Diameter 10 mm Length 25 mm

Description Product range StarLED Electrical features Voltage type AC/DC Voltage tolerance 10 % Rectifier Half wave Mechanical features Number of LEDs 1 Lamp size T-1 Socket Bi-Pin 2,54 Diameter 3,8 mm Length 10 mm Thermal features Operating temperature -20...+60 °C Storage temperature -25...+80 °C

Description Average Lifetime Electrical features Max. Striking Voltage AC Max. Striking Voltage DC Current Series resistor at 110V Series resistor at 230V Mechanical features Socket Diameter Length

Description Manufacturer CML Technologies GmbH & Co. KG Optical features Indicator type standard Electrical features Voltage type AC/DC Voltage tolerance 10 % Rectifier Bridge Pin assignment Brass terminal = anode, tinned terminal = cathode Mechanical features Number of LEDs 1 Number of Chips 1 Lens typ Flat Lens size 16 mm Lens surface diffused Mounting type With bezel Bezel typ Superflat bezel Screw thread size M22 Bezel material plastic Bezel color black Material plastic Makrolon 2805 Connector type Tab terminals 2,8mm x 0,8mm Number of Connectors 3 IP Code IP67 Max. panel thickness 8,5 mm Thermal features Operating temperature -25...+60 °C Storage temperature -25...+60 °C Norms & Standards UL listed Yes VDE certified No Miscellaneous Connectors for lamp test No

Description Manufacturer CML Technologies GmbH & Co. KG Optical features Indicator type standard Electrical features Voltage type AC/DC Voltage tolerance 10 % Rectifier Bridge Pin assignment Brass terminal = anode, tinned terminal = cathode Mechanical features Number of LEDs 1 Number of Chips 1 Lens typ Flat Lens size 16 mm Lens surface diffused Mounting type With bezel Bezel typ Superflat bezel Screw thread size M22 Bezel material Metal Material plastic Makrolon 2805 Connector type Tab terminals 2,8mm x 0,8mm Number of Connectors 3 IP Code IP67 Max. panel thickness 8,5 mm Thermal features Operating temperature -25...+60 °C Storage temperature -25...+60 °C Norms & Standards UL listed Yes VDE certified No Miscellaneous Connectors for lamp test No