Taps - Import export

Large Quantities: produced as cold formed parts (so-called multi-station presses), which require high output volumes in order to achieve a reasonable price parts Small Quantities: Produced as turned parts - the economic adjustment to small batch sizes Fields of application: For thermoplastics, duroplastics, light alloys, metal compounds. Industrial consumers: Electrical industry, plastics processing industry, sheet metal processing industry, telecommunications, tank- and container construction.

With our delivery program “Screws for direct screwing” we deliver a great variety of thread rolling screws in different implementations. In doing so we realize small lot sizes and short-term delivery dates. Upon request we also introduce customer-oriented warehousing also in your company. Apart from the many advantages you can save time and money. We provide: KTG screws for thermoplastic materials: single pass thread or double pass thread (high/low); head shapes with cross or 6-star (similar Torx). Tapping screws: longitudinal slot, cross slot, cross-head-combination slot or 6-star (similar Torx). DIN 7981, 7982, 7983 or to the new ISO standards; special tip-styles, e.g. with with pressed washer. Combination screws with undetachably washers: According to DIN 6901. Self-tapping screws: According to DIN 7500. Fields of application: For thermoplastics, duroplastics, light alloys, metal compounds. Industrial consumers: Electrical industry, plastics processing industry...

The economic adjustment to small batch sizes, we meet with our turned parts for the direct assembly in plastics and die-cast products. Any thread forms such as, thread-tapping (DIN7500), thread cutting (DIN 7513-7516) or KTG for direct screw in plastics are realized cost-effectively. Advantage is the elimination of high tooling costs, since no counter-thread in the workpiece (eg threaded inserts, nuts, etc.) is required because the direct assembly takes place directly into the workpiece. Only a given tube is required in order to screw it directly. Our turned parts replace previously cold formed parts used (so-called multi-station presses) which require high output volumes in order to achieve a reasonable price parts.

The modern mixer tap is uniformly integrated into the caravan interior - so everything stays in place even when en route.

Valve tapping bridge with service shut-off and for tapping 1 "- 2". Combination rubber insert chambered with several micro-sealing lips. Seal material according to KTW / W 270. Seal the bore with the auxiliary shut-off via the side outlet and seal it after tapping until the valve bonnet is reassembled. For each dimension, a top with matching clamp. scope of application • for plastic pipe (PE or PVC) DN 50 - 200 • for sluice-free, upper tapping under pressure by means of Rehbein auxiliary valve • for water up to PN 16

Flat slide with operating shut-off for water up to PN 16 (optional for gas up to PN 5) and for top tapping 1 "- 1½" under operating pressure. Thread outlet 1 "- 1½" parallel to the supply line. Connection piece with extremely low height. Outlet by means of elbow union. Front and main shut-off with externally driven, chrome-plated switching ball. Nominal diameter range DN 80 - 500 with only one connection piece with patented Vario seal. Seal material is from DVGW to KTW / W 270. Scope of application • for cast iron, steel and AZ pipes DN 80 - 500 • For sluice-free tapping under pressure without auxiliary valve • for water up to PN 16 • optional for gas up to PN 5

Flaming tap for drinking water sampling (chemical and microbiological parameters) With soldered brass pipe Diameter 10 x 6 mm, 90 mm

Telescopic installation set for civil engineering / road construction / pipeline construction. Infinitely adjustable, with square key bar, dome sleeve, pull-out guard, cap, protective tube and stepped bell with dirt-tight fit. Poles and castings completely galvanized.

Tapping valve bridge with lateral outflow and integrated stainless steel drill milling cutter Model 762 (for plastic pipes (PE oder PVC) Tapping valve bridge with stop valve and for tapping 1½“. The upper part of the milling valve for tapping is already mounted under pressure - ready for use. The tapping cutter with chambered sleeve prevents the drilling chips from being flushed out. The seal material corresponds to the KTW-recommendations of the Federal Environment Agency (UBA) as well as to the requirements acc. to DVGW W270. Application • for plastic pipes (PE oder PVC) DN 50 - 200 • for water PN 16 until DN 150, for water PN 10 until DN 200

High-lift valve fitting with ball shut-off for tapping without the use of an auxiliary shut-off. For the entire nominal diameter range from DN 80 to DN 500, only one connection piece with patented Vario seal is required. The Vario seal is factory-mounted in the connection piece, which avoids unintentional twisting or falling out on the construction site becomes. The sealing material complies with the KTW recommendations of the UBA and the requirements acc. DVGW worksheet W 270. — for tapping 1 "-1 1/2" — with Vario seal — with ball shut-off — with Niro overdrive spindle — with plastic inner lining — Surface protection EKB Blue Outgoing versions: 1 "IG -2" IG or VLUX

Tapping of water is also possible during frost periods because the hydrant is completely emptied when in „closed“ Position. Simple emptying per Drainage. Wear-free operation due to the use of ceramic disks. Water jet and flow rate are alterable by use of different tap aerators. Non-return valve in the water inlet. Free choice of location (a wall etc. is not necessary). Hydrants are also available with lockable handle. height: 1400mm outlet: 150mm Art.-No.: 376797 height: 1400mm outlet: 250mm Art.-No.: 376803 height: 1400mm outlet: 300mm Art.-No.: 376810 height: 1600mm outlet: 150mm Art.-No.: 376827 height: 1600mm outlet: 250mm Artikelnummer: 376834 height: 1600mm outlet: 300mm Artikelnummer: 376841 height: 2000mm outlet: 250mm Artikelnummer: 376858 height: 2000mm outlet: 300mm Artikelnummer: 376865