Electronic controllers - Import export

Reach for the stars! The innovative adjusting knob DKE01 combines a programmable electronic position indicator with a star grip or disk handwheel to offer a flexibly usable positioning unit. The indicated values can be configured application-specifically to cover the most varied areas of use with always the same basic device. Turning knob with integrated 5-digit LCD display. Digit height approx. 11,5 mm. Freely programmable via the ProToolDE programming software. Usable for length or angle measurement. Shaft accommodation: max. Ø 20 mm. Long battery life. With disk handwheel as an option.

They are the accessories used in electronic panel control,after processing for a variety of color surface treatment.

freely programmable Profile DKE01: Turning knob with integrated 5-digit LCD display Digit height approx. 11,5 mm Freely programmable display values Usable for length or angle measurement Shaft accommodation: max. Ø 20 mm Long battery life with disk handwheel as an option

The generation of compressed air is always connected with the formation of condensate. In most cases, this condensate contains oil, is contaminated with dirt particles and spreads out in the entire compressed-air system. A system problem which can result in damage and additional costs. The BEKOMAT drains condensate in the compressed-air system in an electronically level-controlled manner. More than 3,000,000 installations worldwide make it the industrial standard for reliable and cost-effective condensate drainage.

17 901 105 55000 rpm..; Collet 3,0mm, Continous speed regulation; Direction of rotation: right/left with potentiometer at electronic or foot control. Avaliable as a set: motor, electronic, foot control, deposit

Demag rope hoists feature high handling rates, cost-effective operation and maximum safety. As basic hoist units for integration into plant and machinery or as lifting solutions with electronic controls that are optimized for crane applications, with our wide range of rope hoists we offer the optimum solution to meet our customers' specific requirements for efficiently lifting loads weighing up to 100 tonnes.

The B250 is a completely electronically controlled disc humidifier that is fitted with an electonic sensor, which permits indicates the level of moisture in the air. Just configure the humidistat to the desired humidity, the one that’s right for you and the application and allow the completely electronic controlled unit do the rest. It is extremely nice to possess something that offers great dependability. The key lock is an extra feature that is purposed to provides added peace of mind. Simply input your exclusive combination to lock the units keypad and avoid unauthorized use, tampering or accidental access that may change the overall settings. Owing to the phrase used in Germany "trust is good, control is better" The B250 has a water level gauge that is located in the operational panel. Furthermore, there is no need stress about the unit going up in smoke of short circuiting.

Bow and skew detection and control The Orthopac FMC automatic straightener is the heart and core of the Orthopac. The device consists of an optical scanning system and electronic control for distortion correction. It is used primarily to detect and log residual distortions in the exit end of a system, e.g. with the stenter. Thread density can be determined at the same time. It can also be connected to external straightening machines then serving them as control unit.

The auger feeder series enables the volumetric dosing of powdery products with fine granulation, which can sometimes present problems of compactness, dust content and variable density, such as cocoa, curry and other "powdery" products. The various problems associated with processing the products are solved, starting with feeding the product through a hermetically sealed hopper equipped with a level sensor and a motorised agitator. The screw, made from a single solid mass, has an electronically controlled speed by means of a servo motor, which allows the use of acceleration and deceleration ramps that ensure an immediate screw stop, thus guaranteeing optimum dosing accuracy.

Rapid developments in the fields of control engineering and in microprocessor and semiconductor technology have resulted in the widespread use of electronically controlled systems in every branch of industry today. This has created a need for sensors that are inexpensive but, at the same time, sufficiently robust, both electrically and mechanically, to withstand a wide range of temperatures (e.g. from -40 to +160 degrees centigrade), particularly in applications involving large quantities, such as the automobile industry. Fig. 1 provides a summary of the various types of sensors for angular and linear motion that are in use today. This paper is concerned with quality criteria (1) and (2) applicable to conductive-plastic potentiometers for use as sensors for angular and linear motion. Such potentiometers essentially comprise the following components: 1. The resistance element (support material + a resistance track of conductive plastic) 2. A wiper (precious metal alloy) 3. A...

Electronical Torque & Pulse Controller The VDI Directive 2862 for the use of Tightening Systems in the Automobile Industry is classifying bolt joints into three precise categories. The directive also is a guideline for the selection and the use of suitable assembly tools or tightening systems. According to the directive security related bolt joints shall be counted, documented and of course be tightened with the proper preload force. To achieve this Yokota equipped the impulse wrenches with an integrated transducer. In combination with Yokota's electronical controller YETC-210 torque values can be controlled, monitored and, of course, recorded. The also monitored pulse number refers as a second parameter. An exact parameterization to individual joint characteristic (soft/hard) is feasible. Yokota's YETC controller measures, judges, counts and documents all tightened joints and if neccessary, files them in a computer. Communication between the controller and the computer...

PokaYoke Impulse Wrenches with Controlled Shut-Off The Yokota YJ series impulse wrenches with double chamber air motor achieve the required torque very quickly. These tools generate a higher number of impulses per second, and therefore very accurate torques can be realised, resulting in increased production speed. Yokota impulse wrenches are widely used for tightening jobs in the assembly industry, where accurate torque tolerances are necessary. Impulse tools are light, powerful, small and very importantly, have no kick-back. Evaluation of tightening processes in car assembly shows that tightening joints uses 10% of the total assembly time. Working with faster tools therefore can speed up assembly lines substantially. In combination with the Poka Yoke controller YTC-3 predefined monitoring parameters will effect an optimized clamping force by electronically controlled shut-off. Applying reaction-free Yokota impulse wrenches at the assembly line will also reduce the RSI risk...

Optimized Clamping Force by Electronically Controlled Shut-Off The Poka Yoke concept of error source inspection particularly applies in production lines. Poka Yoke aims to discover and avoid mishandlings as for example forgotten tightening or double bolting or premature releasing of the trigger. This system is controlled by measuring the air pressure at the inlet side of the air motor. This air pressure varies from free running to impulsing. By this measured air pressure the controller detects contact of the bolt head. Upon contact, the adjustable timer initiates the shut-off signal. Adjustability of the timer takes care of adoption to either hard or soft joints. Similar, the controller detects double hits and trigger release before shut-off. Conventional shut-off nutrunners already interrupt the force transmission during the rising part of the torque curve (2). The YTC-3 controller achieves optimal clamping force by controlled switching off within the horizontal range of the...

Klöpper Therm designs and manufactures specified switch and control cabinets in various designs – for nearly all types of electric surface heating. By the installation of electronic controllers, heating systems can be controlled in dependence of temperature and/or humidity. Arising disruptions during the control of temperature measuring sensors such as e.g. a falling below temperature, can be signalled or transmitted via indicator lights and/or dry contacts. The operating conditions of each heating circuit in the cold store is indicated by LED indicator lights. Via keylock or push buttons, all heating circuits can be checked quickly and simply. You can easily get an overview about economic efficiency and energy consumption of your heating system incl. documentation with an operating hours counter or energy meter.

Battery Impulse Wrenches with electronically controlled Shut-Off High tightening speed combined with good accuracy. No reaction forces during the tightening process. Brushless motor for long motor life and high efficiency. No tightening functionality when battery charge is low, thus process safety improves. Very well suited in areas where cables and hoses impede handling flexibility of tools, such as interiors of cars, coaches and trains. The high performance lithium ion battery is pushed in horizontally and secured by a clip lock against slipping out. At too low battery level the tool will immediately stop to ensure process reliability. Applying reaction-free Yokota impulse wrenches at the assembly line also reduces the RSI risk significantly. The one hand operable YBX-T generates low vibration and low noise levels. A diode light facilitates finding of the screw and/or nut. Key Features Accurate torque with close tolerance High repeatability No kickback High speed –...

Perfect fit: Fat remover ASF 560 E for pork belly and loin of pork. Maximum yield with little post-processing. Optimised blade holder profile for exact adaptation to the cross section of the product. Electronically controlled movement along longitudinal profile for exact adjustment to the fat contours. The result: Less fat on the pork belly/loin, less lean meat in the belly/back fat. Advantages Minimal post-processing after the processing workflow Line concept: Perfect integration of the machine in stripping workflows Options: Operating personnel can also remain outside the machine stand Curved blade holder profile for ideal product adaptation Special sub-frames (height adjustment)

Description 17 901 104 35000 rpm.; Collet 3,0mm, Continous speed regulation; Direction of rotation: right/left with potentiometer at electronic or foot control. Available as a set: motor, elektronic, foot control, deposit 17 901 105 55000 rpm..; Collet 3,0mm, Continous speed regulation; Direction of rotation: right/left with potentiometer at electronic or foot control. Avaliable as a set: motor, electronic, foot control, deposit 17 901 103 Control unit for MP35 continous speed regulation, direction of rotation right/ left. regulation with control unit or foot control 17 901 107 Control unit for MP55 continous speed regulation, direction of rotation right/left. regulation with control unit or foot control. 17 901 106 Foot pedal for MP35 and MP55 Continous speed regulation; with connecting cable 17 901 108 Motor deposit for MP35 and MP55

17 901 104 35000 rpm.; Collet 3,0mm, Continous speed regulation; Direction of rotation: right/left with potentiometer at electronic or foot control. Available as a set: motor, elektronic, foot control, deposit

SPIROL’s Series 2000 Vibratory Feed Systems provide higher feed rates, gentler feeding, and the ability to accommodate a wider range of part configurations and materials than conventional feed systems. The advanced state-of-the-art electronic controller combines modern technology and unique features to deliver superior performance by continuously and automatically adjusting the drive system to the natural frequency of the bowl. This variable frequency technology compensates for changes in the bowl mass to ensure consistent feed rates and eliminates bowl tuning, allowing interchangeable bowls with a single drive. Additional benefits include increased energy efficiency, clockwise/ counterclockwise capability, reverse rotation, and significantly lower noise levels. The controller utilises a touch screen interface with the capacity to store 50 recipes. This system is ideal for fragile, tactile, and slippery parts. Visit www.SPIROL.com to learn more!

max. size 46 x 64 cm age 1985 single sheet feeder conventional dampening electron. double sheet control dry sprayer Delivery time: immediatelly from stock Ref: HE240001A Please ask for price. We ship and install worldwide!

Chocolate hot-pot. 370 x 360 x 195 mm. Design CNS 18/10. With electronic temperature-control to max. 50°C, Temperatur difference +/-1°C. Capacity: 8 liter. Incl. 1 GN-inset 2/3-100 with wire grid and GN-lid. E-conn.: 230V/1,8kW.

The B300 unit offers the best humidification in its segment. The B2300 mates superior appealing design with class leading technology to render a revolutionary humidifier that is purposed to the highest grades while combining unobtrusively into its stylish ambiance. There are however a few who would agree that the fetching form of the B300’s and the modern design even make it a masterpiece in its own right. Needless to say, the B300 is not just a glamorous humidifier from the outside, it is an extremely efficient piece of technology that is engineered to cater to the needed of extremely critical users who has a precise perspective of what they want when they decide to invest in a product that is made in Germany. Practical advantages: High-performance humidifier with multistage fan and large-sized water tank UV lamp for the effective disinfection of the service reservoir Fully-automatic operation electronic control via moisture sensor

• 2.4 mm up to 6.4 mm Ø alu and copper • Up to 6 mm Ø steel & 5 mm Ø stainless steel • Up to fl ange diameter 11.4 mm • Rivet body lengths above 30 mm • Traction power up to 11,770 N at 6-7 bar air pressure Productivity and savings potential • Up to 40 blind rivets can be processed every minute • No trained personnel required for operation • Can be easily integrated into fully-automatic production systems • Electronic system controls • Intuitive menu guidance via navigation and function keys • Function display • Maintenance display and simple fault diagnosis • Customer-specifi c software modifi cation is possible • Ideal for applications that do not require any process monitoring • Rivet mandrels are disposed of by vacuum system • Spring loaded trigger system as an optional extra available • Can be integrated into the system or operated independently • Interface for external memory programmable control system (SPS) can be realised via the GESIPA® interface

AccuBird® – Production • Developed and produced in Germany since 1992 by the inventor of the battery blind rivet setting tool Reliability • Electronic control • No mechanical switching components • Electronic temperature and overload protection • High reliability through low loss power transmission via a highly effi cient ball screw drive Freedom Cablefree tool for fl exible operation in installation jobs and industry production High performance • 10.000 N setting force • High pulling force for safe setting of blind rivets up to 5 mm diameter in all materials • High yield per battery charge • Large 20 mm stroke Versatility Blind rivets up to 5 mm Ø all materials. BULB-TITE® blind rivets 4 mm, 5,2 mm and 6,3 mm Ø alu and steel High speed • High speed of operation through automatic resetting of the jaw mechanism immediately after each setting process With Li-Ion energy • Choice of 2.0 Ah and 4.0 Ah Li-Ion batteries

aluDISPLAY is a display enclosure available in three widths, with a modern design and well-thought out product features. Ideal for electronic controls and operating units with flat modules. Assembly or removal of the enclosure is extremely quick thanks to snap-on covering profiles. An internal profile slot enables circuit boards to be easily inserted or for system components to be directly attached with spring nuts. The front plate is ideal for the attachment of membrane keypads or the attachment of touchpanels. The aluDISPLAY can be connected with the ROLEC suspension arm system, taraPLUS, using the compatible end cover.

The small steam boilers of the Junior 80 - 400 TC series are completely equipped, ready-to-operate, electronically controlled rapid steam generators with all safety devices for burner technology, pressure and temperature. With a height of only 1.5 m and 0.7 m width the Junior 80 TC steam boiler can be erected even in small spaces. Combustion: Oil or gas Steam output optionally 80 - 120 kg/h 150 - 200 kg/h 250 - 400 kg/h

713X \ 726X \ 745X – WITH ELECTRONICALLY CONTROLLED DRIVE & CONTROL VIA JOYSTICK – LITHIUM BATTERY – CHARGER – LINE LASER – ERGOPACK TOOL-LIFT – SEALING TOOL – CONTROL VIA INDUSTRY TOUCHSCREEN INTERESTED? WE WOULD BE HAPPY TO VISIT YOU AND CONFIGURE THE SYSTEM INDIVIDUALLY WITH YOU ON SITE. 700X WITH ELECTRONICALLY CONTROLLED DRIVE & CONTROL VIA JOYSTICK LITHIUM BATTERY CHARGER CONTROL VIA INDUSTRY TOUCHSCREEN

713E \ 726E \ 745E WITH – ELECTRONICALLY CONTROLLED DRIVE & CONTROL VIA JOYSTICK – 24V AGM BATTERY PACK – CHARGER – ERGOPACK TOOL-LIFT – SEALING HEAD We will be happy to discuss the individual configuration of your system in person after a product demonstration at your site. 700E WITH – ELECTRONICALLY CONTROLLED DRIVE & CONTROL VIA JOYSTICK – 24V AGM BATTERY PACK – CHARGER We will be happy to discuss the individual configuration of your system in person after a product demonstration at your site. 700 WITH – MANUALLY DRIVE VIA A HAND CRANK We will be happy to discuss the individual configuration of your system in person after a product demonstration at your site.