Gas nozzles - Import export

You won’t get it more flexible. The mobile welding laser AL-ARM was developed to quickly and flexibly repair offset seams, pores and penetrations in the car body. The fiber laser system can be positioned quickly and has a long range. The 3D visualization with integrated laser safety glasses enables the user to observe his welding task as well as the surroundings. The welding process is shown enlarged and the process-relevant data is also visible in the image. The handpiece, which is used for welding, is equipped with an automated wire feed and an integrated shielding gas nozzle. It weighs just 1.5 kg and is easy to position. There is no set-up time for welding.

Mould parting agent for entire range of plastics processing if an adhesion-dependent further processing requiring silicone-free parting agent is carried out Welding parting agent for arc welding and inert-gas arc welding As nozzle spray for extended service life of welding nozzle and keeping nozzle opening clear on automatic welding units As workpiece protection against baking and burning on of weld spatters Advantages and benefits Silicone free release agent with high effective substances from renewable primary products Prevents from burning in of spatters at welding nozzles, on workpieces and robots and increases the lifetime of the welding torch Builts up an evenly thin, nearly dry film, no creation of pores Enables the fast change and cleaning of the welding nozzle Easily washable with OKS 2650 Additional painting, metallising and printing after prior degreasing without any difficulties possible

Protection of surfaces of all kinds and welding nozzles for oxyacetylene gas and inert-gas arc welding Prevents baking on of weld spatters on surface and welding nozzle Advantages and benefits Later painting over, metallising and printing following prior cleaning easily possible Environmentally friendly, non-combustible Silicone-free Can be removed residue-free

Protection of surfaces of all kinds and welding nozzles for oxyacetylene gas and inert-gas arc welding Prevents baking on of weld spatters on surface and welding nozzle Advantages and benefits Later painting over, metallising and printing following prior cleaning easily possible Environmentally friendly, non-combustible Silicone-free Can be removed residue-free OKS 1600 is also suitable for use with the refillable Airspray system Also available as spray version OKS 1601

Mould parting agent for entire range of plastics processing if an adhesion-dependent further processing requiring silicone-free parting agent is carried out Welding parting agent for arc welding and inert-gas arc welding As nozzle spray for extended service life of welding nozzle and keeping nozzle opening clear on automatic welding units As workpiece protection against baking and burning on of weld spatters Advantages and benefits Silicone free release agent with high effective substances from renewable primary products Prevents from burning in of spatters at welding nozzles, on workpieces and robots and increases the lifetime of the welding torch Builts up an evenly thin, nearly dry film, no creation of pores Enables the fast change and cleaning of the welding nozzle Easily washable with OKS 2650 Additional painting, metallising and printing after prior degreasing without any difficulties possible

In contrast to chamber devices, the vacuum sealer AZ450 from AIRZERO works with a suction nozzle. This principle offers advantages Since only the bag and not the entire chamber is emptied, the process is faster. Lower gas consumption when gassing (only the bag is gassed and not the entire chamber). The gas is blown into the bag in a targeted and controlled manner. No limitation of the bag length by the chamber. Bar goods can therefore also be processed. Compact desktop device. double sealing (up/down) ejektor vakuum pump (air pressure required) gas flushing digital vakuum display 4 programms can be saved housing of stainless steel

The test bench is designed for calibration with critically operated nozzles of domestic gas meters or others such as diaphragm gas meters, ultrasonic meters, thermoelectric gas meters. The test bench is specially designed for the calibration of domestic gas meters (bellows gas meters, ultrasonic meters, thermoelectric gas meters). The test bench is modular - 1x6 to 4x6 clamping positions for the gas meters can be combined. Due to the modular design 1 to 12 gas meters can be tested simultaneously. In parallel, up to twelve additional test pieces can be adapted, run in and leak tested. A magazine consisting of three critical nozzles is used as flow transmitter. Optionally, a nozzle drum with nine combinable nozzles can be used. This allows the generation of up to 512 different flow points with highest accuracy.

CHARACTERISTICS Efficient dust filtration High deposition rate (efficiency) Filter efficiency tested acc. SAE Fine Test Long service life of the filter elements Upstream coarse particle separation For all gases according to G260 For non-aggressive special gases OPTIONEN Customer-specific design for other regulations (ASME, EN 13445, SVTI, AS1210, PD5500, etc) Customer-specific approvals Customer-specific testings Application for sour gas (NACE) Design for low temperature down to -50 ° C Design pressure up to 300 bar Design temperature up to 250 ° C Customer-specific nozzle arrangement Leaflet (english version in progress): D-5025 Patronenfilter / Typ VPF General Cartridge filters are used to clean gas from dry solid dust particles. The design is carried out as a steel welded construction. FUNCTION The gas flows through the inlet nozzle into the filter housing.

CHARACTERISTICS budget priced short installation length type VZF and ZFG high filtration rate (efficiency) replacable filter cartridges large dust collection area VZF / ZFG dust drain nozzle N3 upstream coarse particle separation 4-way differential pressure connections DVGW certified for all gases according to G260 for non-aggressive special gases many sizes in stock VARIANTS Silumin Cast (VZF/VZEF) Cast Iron (ZFG/ZEFG) Straight Through – VZF/ZFG | DN25 – DN150 Corner Type – VZEF/ZEFG | DN25 – DN100 PN16 | -10 / +70 °C PN16 | -20 / +70 °C PN16 | -40 / +70 °C PN16 | -10 / +150 °C zzgl. TÜV HTB (5 bar g) | -20 / +70°C PN40 | -10 / +70 °C DN25-DN80 PN40 | -20 / +70 °C DN25-DN80 PN40 | -40 / +70 °C DN25-DN80 DNV (maritime) DN25 – DN100, 10 bar g | 0 /+60°C Leaflet: E-5055 Cellular Gas Filter / Type VZF/VZEF/ZFG/ZEFG FUNCTION The gas flows through the inlet nozzle into the filter housing.