Measurement and regulation equipment and instruments - electricity and other energy - Import export

Analogue pressure and differential pressure transmitter series Features: Analogue pressure and differential pressure in numerous designs Proven reliability in numerous designs and processes Piezoresistive measuring system or thin film Measuring system high overload protected Wetted parts of stainless steel Degree of protection IP 65 Options: Explosion protection for gases and dust GL (Germanischer Lloyd) certificated (CB1/CE1 only) Degree of protection IP 67 Classification per SIL2 (COMPACT)

Features ■ Differential pressure transmitter with metallic diaphragm ■ Function modules: Multifunctional display; Switching module with 2 floating channels; HART® module ■ Function module replacement on site without recalibration, „plug and measure“ ■ Nominal ranges 0.4 up to 40 bar ■ Turndown 5:1 ■ Accuracy ≤ 0,15 % ■ Output signal: 4…20 mA; alternative with PROFIBUS PA ■ Output functions: linear, invers, table function ■ Stainless steel case in sturdy design, degree of protection IP 69K ■ Media temperature -40...100 °C ■ Wetted parts stainless steel ■ EAC declaration (upon request) Options ■ Approvals/Certificates - Explosion protection for gases and dust - Certificate of measuring equipment for Russian Federation - Material certificate and calibration certificate as per EN 10204-3.1 - Classification per SIL2

Features ■ Pressure transmitter for the measuring of relative and absolute pressures of gases, vapors and liquids ■ Stainless steel case in sturdy design, degree of protection IP 65/67 ■ Accuracy 0.1 % ■ High-resolution graphic display with Intuitive 4-button operation and backlight ■ Comprehensive parameterising and simulation and diagnostic functions ■ Nominal range 0.25 bar to 400 bar ■ Turndown up to 100:1 ■ Measuring rate up to 100 Hz ■ Output signal 4…20 mA with HART® protocol ■ Digital communication via PDM, FDT/DTM, 375/475 Field Communicator ■ Output functions: linear, invers, square root, table function ■ Media temperature -40…100 °C ■ Wetted parts stainless steel ■ Case design: process connection bottom or back ■ Process connections: various screw-in thread with internal diaphragm ■ Approved according to NAMUR 95 Options ■ Explosion protection; SIL2; material certificate and calibration certificate per EN 10204 ■ Degree of protection IP 69K

Pressure transmitter with diaphragm seal technology for the measuring of relative and absolute pressures of gases, vapors and liquids Stainless steel case in sturdy design, degree of protection IP 65/67 Accuracy 0.1 % High-resolution graphic display with Intuitive 4-button operation and backlight Comprehensive parameterising functions Comprehensive simulation and diagnostic functions Quick access to device data Development according to SIL2 Nominal range 0,25 bar to 400 bar Turndown up to 100:1 Measuring rate up to 100 Hz Output signal 4…20 mA with HART® protocol Configuration memory Digital communication via PDM, FDT/DTM, 375/475 Field Communicator Output functions: linear, invers, square root, table function with up to 64 support points Media temperature -40…400 °C Case design process connection bottom Case design process connection back Various process connections Approved according to NAMUR 95 EAC declaration (upon request)

High-resolution graphic display with backlight Intuitive 4-button operation Comprehensive parameterising functions Comprehensive simulation and diagnostic functions Quick access to device data Development according to SIL2 Nominal range 0.25 bar to 40 bar Turndown up to100:1 Measuring rate up to 100 Hz Accuracy 0.1 % Output signal 4…20 mA with HART® protocol Configuration memory Digital communication via PDM, FDT/DTM, 375/475 Field Communicator Output functions: linear, invers, square root, table function Table function with up to 64 support points Stainless steel case in hygienic design, degree of protection IP 65/67 Media temperature up to 160 ° C Wetted parts stainless steel Case design: - process connection bottom - process connection back Various hygienic process connections Approved according to NAMUR 95 EAC declaration (upon request)

Universal pressure transmitter Features: Stainless steel case, degree of protection IP 65 Direct ventilated sensor element Measuring ranges: 0…100 mbar to 0…400 bar rel.; 0…1 bar to 0…6 bar abs. Accuracy ≤ 0.2 % Further features Options: Approvals/Certificates: Certificate of measuring equipment for Russian Federation; Material certificate as per EN 10204-3.1; Calibration certificate as per EN 10204-3.1 Degree of protection IP 67

Pressure transmitter PASCAL CVfor general applications, Type series CV3100, CV3101 Modular pressure transmitter with internal or flush-mounted diaphragm Output signal: ● 4…20 mA ● HART® protocol (rev. 6), option ● PROFIBUS PA, option Function modules ● Multifunctional display with 5-segment digital display and bar graph ● Switching module with 2 floating channels, maximum 0.5 A switching current, electrically isolated at all sides, without additional auxiliary power Function module replacement on site without recalibration “plug and measure” Limits of measuring range 0…80 mbar to 0…400 bar Accuracy: ≤ 0.15 % Turndown 5:1 Degree of proctection IP 66, piezoresistive measuring cell directly aerated Options Explosion protection for gases and dust Classification per SIL 2 Inspection certificates; material certificate and calibration certificate as per DIN EN 10204-3.1 Degree of protection IP 69K

Features Measurement of relative pressure of gases, vapours and liquids Output signal: 4…20 mA, 2-wire technology Stainless steel case, degree of protection IP 65 Easy zero setting by means of a magnet Accuracy ≤ 0.5 % Options: Output signal (invers) 20…4 mA Accuracy ≤ 0.3 % Hygienic design

"Kombibar" Combined pressure measurement device Features: Combination of diaphragm seal technology with pressure transmitter and mechanical gauge A wide range of variations can be realized All process connections of LABOM´s diaphragm seal portfolio available Redundant measurement of 2 devices in one process connection Options: Explosion protection for gases Optional with switch function

Features ■ Pressure transmitter with on-site indication for relative pressure measurements ■ Safety pattern gauge S3 per EN 837-1, NS 100 and 160 alternative high quality case with bajonet ring per EN 837-1 S1 ■ Nominal range 0…0.6 bar up to 1000 bar ■ Output signal: 4…20 mA (20…4 mA) 2-wire technology ■ Integrated angle-of-rotation sensor, not subject to wear ■ EAC declaration (upon request) Options ■ Approvals/Certificates - Calibration certificate - Explosion protection for gases and dust - Certificate of measuring equipment for Russian Federation - Material certificate as per EN 10204-3.1 ■ The electrical zero can be corrected by holding a ferromagnetic object to a marked location on the case ■ Additional switch function ■ Diaphragm seals see product group D5 ■ Output signal 0...20 mA and 0...10 V in 3-wire technology (for devices without Ex-protection and without zero point setting)

This bourdon tube pressure gauge with switch function (electrical contact device) has been especially constructed for the operation with diaphragm seals. A custom bourdon tube that is reduced in volume produces a very slight temperature error. Diaphragm seals with reduced diaphragm surface areas may also be used. A large selection of LABOM diaphragm seals is available for a variety of applications. Bourdon tube pressure gauge for diaphragm seal and switch function Nominal range -1…3 bar to -1…15 bar, 0…4 bar to 0…400 bar High quality case with bajonet ring NS 100 Case, measuring element and pressure connection of stainless steel Instrumention connection welded with diaphragm seal Small temperature error by means of reduced-volume measuring element Process connection via diaphragm seal product group D5 Electrical contact device per DIN 16085 EAC declaration

Pressure transmitter/Pressure switch PASCAL CSfor general applications, Type series CS2100 Multifunctional pressure transmitter/pressure switch Degree of protection IP 65 4 digit LED display, can be mirror-imaged by 180° Indication module can be turned through 300° Measuring ranges 0…100 mbar to 0…40 bar rel., 0…1 bar to 0…6 bar abs, High pressure 0…60 bar to 0…400 bar Output signal 4…20 mA, 2-wire technology Accuracy: ≤ 0.2 % Easy to program locally (as per VDMA standard) Galvanic isolation between transmitter and switching outputs Various process connections Options 2 floating contacts Switching contacts with high switching current (1A) Inspection certificates - material certificate per DIN EN 10204-3.1 - calibration certificate per DIN EN 10204-3.1 Electrical connection rotatable by 300° Degree of protection IP 67

The digital differential pressure transmitter PASCAL Ci4 Delta P has been specially designed for the mounting of diaphragm seals with a volume reduced differential pressure chamber. Due to this design the transmitter is suitable for various applications, e.g. for the level measurement of pressure vessels.

Pressure transmitter COMPACT Features: Measuring ranges 0…250 mbar up to 0…100 bar Linearity error including hysteresis <+ 0.2 % f.s. Piezoresistive measuring system Hygienic design according to EHEDG, FDA and GMP recommendations Material and surface quality according to the hygienic requirements Wetted parts of stainless steel; completely welded Stainless steel housing as standard or field housing Degree of protection IP 65, IP 67 option Output signal: 4…20 mA Process temperature up to 200 °C Options: Explosion protection for gases Classification per SIL 2 Inspection certificate: material certificate as per DIN EN 10204-3.1