Generating units - Import export

These parts are used in printer accessories.

Valve mechanical shaft fittings,CNC machining.

The CSN® HECT, HEVT and HECT/VT by Schniewindt combines proven sensor technology and opticaldigital data transfer according to the standard IEC 6185092, creating a future orientated solution for applications in high voltage AC substations. The required values to be measured are recorded in analog signal form by conventional sensor elements (R/C high voltage divider for voltage measurement and Rogowski coil for current measurement) on HVline potential and transferred to the RemoteDataModule (RDM) mounted in the head construction of the instrument transformer. The RDM converts the recorded data into a digital serial protocol and transmits them via optical fiber to the Merging Unit (MU), located in the control room. The distance between instrument transformer and MU can be up to 1 km. The MU transfers the data protocol of three instrument transformers into the protocol according to IEC 6185092. For signal output

The IEC 6185092 LE Merging Unit is the optimal solution for process bus interfacing. It allows the consolidation of measurements made in the switchyard, feeding protection relays, meters and fault recorders located in the control room. The use of fiberoptical communications makes it inherently safe. By eliminating the majority of copper wiring, the CSN® Merging Unit addresses key technical and logistic challenges affecting the cost of substation design, construction and maintenance. The simple and disturbancefree architecture of the open IEC 6185092 process bus allows operation of relay, meter and faultrecording equipment of different manufacturers on the same bus. The IEC 6185092 LE Merging Unit collects data from conventional instrument transformers and converts the analog signals into a digital protocol

Compact nitrogen gas generator HF30N Integrated nitrogen storage within the unit With the new nitrogen generators HF30N and HF60N Dürr Technik is expanding its portfolio in the field of analytical applications. The HF30N and HF60N nitrogen generators are ideal for use in laboratories that already have a central compressed air supply or where a source of clean compressed air is available at the place of use. HF30N and HF60N are optimised for the current LC-MS systems (liquid chromatography/mass spectrometry), which are increasingly used in laboratories for analysis. Thanks to their compact design and low weight, the nitrogen generator can be mounted on the workbench or underneath. Efficient nitrogen separation ensures a reduced total air requirement and at the same time ensures the production of high purity nitrogen. This results in lower real operating costs and a reduced carbon footprint.

F30A - the most reliable LC-MS Nitrogen Generator nitrogen purity: up to 99 Nominal power: 1,7 kW Efficient and innovative - designed for your laboratory Ideal for use in laboratories where a dependable and affordable source of nitrogen is essential and is suitable all laboratories Premium compressor with state-of-the-art control Unique nitrogen generation solution for your laboratory including advice, customization and a full installation and support service. With the HF30A, Dürr Technik expands its range of nitrogen generators for your analytical applications. Our HF30A nitrogen generator is ideal for use in laboratories where a dependable and affordable source of nitrogen is essential and is suitable all laboratories, especially where a high pressure clean air source is not available at the point of use.

International patent registered for the CLEAN ROOM SYSTEM line (DIN EN ISO 14644-1) The CLEAN ROOM SYSTEM units are linear actuators with belt driven transmission and are specifically designed for Clean Room applications They are supplied with a certificate issued by the IPA Fraunhofer Institute in Stuttgard, which certifies compliance with class ISO 3 (DIN EN ISO 14644-1), or with class Fed Std 0.01 (FED 209 E). The system prevents particles from being discharged in the environment where the linear unit is located. This has been achieved by using a special straight seal that closes the horizontal opening where the slider moves, as well as by the operation of a 0.8 vacuum pump connected to 2 vacuum pipes located inside the drive head and the idle head. The system allows vacuum to be generated inside the unit so that any particles released when the system is operating are sucked towards the air filtration areas. Clean Room System linear actuators components are all made of...

This practical manual operating unit for all generators without user interface allows you to make all entries and adjustments and read current operating parameters. Suitable for all Basic generators of the Sonic Digital series.

The new 9250/9251 amplifier generation unites all the features that make modern measurement data acquisition actually possible for the first time. Network-compatible, high-precision, user-friendly, smart and versatile: the combined system of amplifier module and Fieldbus controller can be integrated into any existing setup. The Fieldbus controller delivers all signals exactly where they are needed, to be combined, checked and linked. With the available Fieldbus interfaces, you are flexible, perfectly connected and you save time, costs and other resources when linking to and integrating into existing systems. Due to the integrated measuring input, the use of a Fieldbus controller module is sufficient for single-channel applications. For multi-channel applications, the system can be expanded to up to 9 measuring channels. Up to 8 bus-compatible model 9250 instrumentation amplifiers can be cascaded on the model 9251 Fieldbus controller.

The Sonic Digital LC Basic is very compact table-top unit suitable for use with a manual operating unit. This generator is perfectly solution for applications requiring frequencies from 20 to 40 kHz and power between 400 and 2,000 W.

The new 9250/9251 amplifier generation unites all the features that make modern measurement data acquisition actually possible for the first time. Network-compatible, high-precision, user-friendly, smart and versatile: the combined system of amplifier module and bus controller can be integrated into any existing setup. The amplifier 9250 in conjuction with the fieldbus controller 9251 takes signals exactly to the point where they can be combined, monitored and linked efficiently to other data. The fieldbus interfaces give you flexibility, speed and perfect connections, and save you time, money and other resources when integrating your measurement setup with existing systems. Automatic sensor recognition due to burster TEDS lets you play absolutely safe, protecting you from setting incorrect parameters. The broad supply voltage range permits operation on standard power supplies used in switch gear cabinets.

Utilize Weber Ultrasonics technology for your system just like your application demands it. The innovative and highly modular Saphir machine concept is a breeze to integrate in existing process lines and can be customized to individual requirements. The machine components generator, feed unit, swing unit and Touch-PC with the powerful control software SAPHIR CONTROL 4.0 and extensive accessories are pre-configured and ready for use.

Electrically conductive wheels and antistatic wheels and castors are used in almost every industrial setting, from medical engineering, electrical and semi-conductor industries to the automotive industry, hospitals, pharmaceuticals and other chemical industrial sectors. These wheels and castors are used everywhere protection against electrostatic discharge is required. Operators and sensitive goods are particularly susceptible to the electrostatic discharge that can be generated by transport units or by transported goods.

Klöpper Therm electric flow boilers are used for generating hot water in heating units for direct heating, storage operation or for Power to Heat systems. As an alternative to other energy types in new buildings or when converting central heating units, these boilers offer a universal range of applications radiator heating, floor heating, mixed systems or bivalent operation with other energy types. Depending on the relevant operating conditions of the energy supplier, the boilers are used for direct or storage heating by utilising free electric power during off peak times.

CSN® PreHeater consists of one or more CSN® Flow Heaters, which are equipped with a valve and a pump, as well as standalone controller.Combustion engines requiring immediate operational readiness must be preheated before starting. The wellknown cold start problems are eliminated and the engine can be operated at full load from the beginning. Furthermore, cold start wear is considerably reduced. Typical fields of application for this type of preheater units are e.g. emergency power units (Diesel engine + generator) or locomotives and ships (Diesel engine for propulsion).Combustion engines requiring immediate operational readiness must be preheated before starting. The wellknown cold start problems are eliminated and the engine can be operated at full load from the beginning. Furthermore, cold start wear is considerably reduced.

The laboratory vacuum shovel dryer DRUVATHERM® is a system provides reliable scale-up to production scales in the context of product and process development and can likewise be used for small batch production too. The Lödige laboratory vacuum shovel dryer DRUVATHERM® is a horizontal, batch vacuum dryer with a frequency-controlled mixing tool. This mixer consisting of mixing elements adapted to the process and arranged on a shaft according to a specific system - is installed in a cylindrical mixing drum equipped with a temperature control jacket. Rotation of the mixing unit generates a three-dimensional product movement, in which all of the product is constantly in motion. The contact frequency of particles with the heat exchange surface leads to shorter drying times. The chopper rotating at high speeds fitted to the side of the mixing drum is used to disperse the product . This leads to a significant increase in drying capacity and prevents moisture and temperature gradients.

Our steam generators are available on request as a ready-to-operate steam boiler plant: CERTUSS steam generator plus CERTUSS supply unit CVE. All components for the water supply and water conditioning of the CERTUSS steam generator are included in the complete steam plant. - Feed water tank - Desalination heat exchanger - Water softening equipment - Test extraction cooler - Mixing heat exchanger - Measuring equipment - Steam dryer The CVE supply unit is compatible with all the CERTUSS steam generators. In addition to the CERTUSS supply unit as a ready-to-operate boiler house installation on a basic frame, we also offer a complete container installation on request. Depending on the desired steam output a multiple steam boiler plant may be suitable for you.

Which purpuse are MAFEX-Potato/Fruit sprayers used for? In general, the MAFEX unit can be used to apply any liquid. Its most common usage is the liquid treatment of potatoes with seed dressing agents, fungicides and anti-sprouting agents (e.g. Fungazil® 100 SL, GROSTOP® Basis, NeoNet® Start, MonCut®, Magnate® 100 SL and Cuprozin® Liquid), the treatment of citrus and other fruits with various types of wax and fungicides. Application of water for dust binding. How and where should a MAFEX be assembled? Mounting of the atomisers for use with potatoes, for example, can be made on de-earthers, box fillers or conveyor belts, with preferred positioning above a step-down drop. With fruits, atomisers can be mounted above the sorting table for example. For MAFEX sprayers with 1 or maximum 2 atomisers there are also mobile supporting stands available. Advantages optimum dispersion of active ingredient uniform allround-wetting of the potatoes or fruits reduction of required quantity of agent

MAFEX® ULV-Spraying Sytems The MAFEX Potato and Fruit fine spray unit is based on ULV (Ultra Low Volume) technology, through which the required output volume can be reduced significantly. By means of centrifugal force using a specially developed rotation disc approx. 30 million droplets are generated from 1 ml of liquid. In this manner, an optimal effectiveness is achieved. There are two product groups of MAFEX®, which have been optimised for their particular area of application: MAFEX® Potato/Fruit – Treatment of potatoes and fruit In general, the MAFEX unit can be used to apply any liquid. Its most common usage is for the liquid treatment of potatoes with seed dressing agents, fungicides and anti-sprouting agents (e.g. Fungazil® 100 SL, GROSTOP ® Basis, NeoNet® Start, MonCut®, Magnate® 100 SL and Cuprozin® Liquid), as well as for the treatment of citrus and other fruits with various types of wax and fungicides. It is possible to apply water with MAFEX for dust binding. MAFEX® Sil

Car body jack 1224Car body jack, (VBG 14), with adjustable claw, top load 8 t, claw 5 t, lift 500 mm haacon concentrates on the business units General Lifting Technology, Commercial Vehicle Components and Lifting Systems in the B2B sector.

Swivel jib crane 4551.035Swivel jib crane, galvanized or stainless, admissible load max. 350 kg, regulating capacity: 1400 - 2000 mm haacon concentrates on the business units General Lifting Technology, Commercial Vehicle Components and Lifting Systems in the B2B sector.

Swivel jib crane made of aluminium alloySwivel jib crane made of aluminium alloy, admissible load max. 160 kg, regulating capacity: 600 - 1000 mm haacon concentrates on the business units General Lifting Technology, Commercial Vehicle Components and Lifting Systems in the B2B sector.

wivel jib crane 4551.015Swivel jib crane, galvanized, admissible load max. 175 kg, regulating capacity 275- 775 mm haacon concentrates on the business units General Lifting Technology, Commercial Vehicle Components and Lifting Systems in the B2B sector.

The ESX-3CM is a compact, robust and efficient control unit. In addition to the ESX-3CS, an ESX-3CM (C = Compact, M=Medium) rounds off the third generation of ESX control units. The “C” stands for “Compact” and indicates that all pins are fixed assigned prior to the hardware definition. The functions of these pins can be defined in more detail using software. Both control units are also suitable for safety-oriented applications up to Performance Level PL d or Safety Integrity Level SIL 2, and are based on a common architectural concept: The robust aluminum die cast housing with automotive plug-in connectors contains a fast 32-bit microcontroller with four MB Flash and eight MB SRAM, up to four CAN interfaces, one serial interface and several LEDs.

The ESX-3CS is a compact, robust and efficient control unit. In addition to the ESX-3CM, an ESX-3CS (C = Compact, S = Small) rounds off the third generation of ESX control units. The “C” stands for “Compact” and indicates that all pins are fixed assigned prior to the hardware definition. The functions of these pins can be defined in more detail using software. Both control units are also suitable for safety-oriented applications up to Performance Level PL d or Safety Integrity Level SIL 2, and are based on a common architectural concept: The robust aluminum die cast housing with automotive plug-in connectors contains a fast 32-bit microcontroller with four MB Flash and eight MB SRAM, up to two CAN interfaces, one serial interface, Ethernet, LIN and two LEDs.

The new POWER CHARGER units cover various performance stages and charging applications. They can be operated either with a supply voltage of 24 V DC or a line voltage in the range of 85 V – 264 V AC. The output voltage is 75 or 150 watts. A membrane keyboard or an optionally available, integrated touch panel is used to control the generators. POWER CHARGER units can be operated using analog operation or via digital fieldbus interfaces. A control system that uses CANopen and ModbusTCP and other fieldbus standards are available.

Why intraday trading? The expansion of renewable energy has caused greater uncertainty resulting from inaccurate forecasts and volatile prices. With intraday trading of flexibilities you can take on these challenges and generate additional profits. To do so, you need an overview over the current situation in the market and open positions as well as a tool to send bids to the exchange in seconds. Short description of ITA ITA is an instrument that shows you the opportunities and risks of trading and smooths the way to successful intraday trading. It contains short-term intraday trading processes in one system with a seamless connection to upstream and downstream systems. You will be able to trade via the exchange interface and register bilateral deals. Coupled with portfolio optimization, it updates trading options and schedule calculations on a permanent basis. You can check the status of your generation units on the different screens and track current activity in the...

Why optimization? With the transformation of the energy system a generation portfolio has to be adapted constantly to new conditions. The more generation units are involved and the more commodities and markets have to be observed, the more difficult the management gets. An optimization solution helps to monitor all aspects of cross-function planning and to utilize the resulting market opportunities in optimal fashion. Brief description BoFiT Optimization is an instrument which maps your generation or trading portfolio into a mathematical model. Based on this model optimization tasks can be formulated and calculated for the various business processes. On the one hand, it allows investment planning, on the other hand, trading flexibilities can be optimized at short notice vis-à-vis current markets. Market channel optimization is possible, as is the evaluation of contracts or recalculation of portfolio performance. The model is created graphically, and no specialized mathematical...