Hydraulics - Import export

Typical areas of use for hydraulic gas spring are controlled opening and closing of hatches and hoods. The gas springs can also be adapted to control complete equipment such as ventilation apertures, chairs, beds, windows, tools and machinery.

Lift castor system for a fast and flexible placing of plant and machinery or assembly tables; gear transmission ratio: 10:1 Max. Load: 500 kg per lifting unit Material: Housing: Die-cast aluminum with PTFE bearing Roller: Plastics PA with ball bearing Roller housing: Zinc plated steel Set: 4 lifting units 1 hydraulic drive unit 4 hydraulic pipes at each 3 m, pre-filled Extras: Other sets on request

— Whitworth pipe thread DIN ISO 228- chambered O-ring — Seals FPM — Material AISI 316L (1.4404) — Temperature range: -4 to 248 °F (-20 to +120 °C) — Working pressure range: -14 to 232 psi (-0.95 to 16 bar) — Not designed for steady motion of the tube

— Whitworth pipe thread DIN ISO 228 — chambered O-ring — Seals FPM — Material AISI 316L (1.4404) — Temperature range: -4 to 248 °F (-20 to +120 °C) — Working pressure range: -14 to 232 psi (-0.95 to 16 bar) — Not designed for steady motion of the tube

- Metric thread- Chambered O-ring - Sealing NBR - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar) - Swiveling, but not designed for steady motion of the tube

- Whitworth pipe thread- Chambered O-ring - Sealing NBR - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar) - Swiveling, but not designed for steady motion of the tube

- Whitworth pipe thread- Chambered O-ring - Sealing NBR - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar) - Swiveling, but not designed for steady motion of the tube

- Whitworth pipe thread DIN ISO 228 - Chambered O-ring - Seals FKM - Material with media contact: Brass, dezincification resistant - Material without media contact: Brass - Temperature range: -4 to 248 °F (-20 to +120 °C) - Working pressure range: -14 to 232 psi (-0.95 to 16 bar) - cooling water, air, vacuum - Stiff angular shape, can be locked with jam nut

Application The portable HD 2500 is designed for delivering high hydraulic pressure up to 2500 bar required for operating hydraulic tools, especially hydraulic tools for loosening and tightening the clamping connections provided at large diesel engines. Capacity hydraulic pressure up to 2500 bar. Drive medium Compressed air with at least 6 bar. Features The hydraulic pressure is adjustable up to 1500 bar. Up to four hydraulic tools can be supplied simultaneously.

Application The portable HD 1500 is designed for delivering high hydraulic pressure up to 1500 bar required for operating hydraulic tools, especially hydraulic tools for loosening and tightening the clamping connections provided at large diesel engines. Capacity hydraulic pressure up to 1500 bar. Drive medium Compressed air with at least 6 bar. Features The hydraulic pressure is adjustable up to 1500 bar. Up to four hydraulic tools can be supplied simultaneously.

The PTS2 series is designed for prototype production, die set-up and modification work (including drawing, bending and punching tasks). The DSP series is especially suitable for die spotting. The mechanical micro inching system provides an accuracy of 0,05 mm. Overview: ● Press capacity: 300-20,000 kN ● Application: die testing tryout and production start-up

The high-speed servo-hydraulic control of the mill screwdown closes the loop: The thickness values measured precise to the micrometre form the basis for quick and precise control. Vollmer offers solutions for all control concepts from simple feedback control through to complete mass flow control or Direct gap contol for rolling of wedge-shaped strip and in tandem mills. Vollmer supplies the complete control system – from the sensors through the control technology right up to the hydraulics and the cylinder – from a single source. For our customers that means having just one contact partner – in short: A one-stop solution.

This design by LEBENDämpfungstechnik GmbH acts as a hydraulic shock absorber in both, pulling and pushing direction. The energy dissipation of this kind of industrial shock absorber is performed in two ways Working principle As a purely hydraulic variant (TwinStroke®) – in push (compression) direction hydraulically reversible by means of damping medium – in pull (tension) direction hydraulically reversible by means of damping medium The TwinStroke® dampens push and pull forces without an additional functional element. A piston system transmits the push and pull forces gashydraulically to different gas and oil chambers. In this way, any load can be absorbed immediately without idle stroke, socalled “slack”, and with minimal wear. The TwinStroke® can absorb changing loads very well. The smaller size and lower weight is advantageous, as only one element is needed to absorb compression and tension forces.

The hydraulic industrial shock absorber of the C-series (COMPENSER®) is the ideal hydraulic buffer for storage and retrieval machines or smaller conveyor systems, crane systems, test stands etc. in light to medium mechanical engineering. Due to its short design, this hydraulic buffer (COMPENSER®) can be used in a spacesaving manner as limitation of the end position (as emergency end stop) in industrial applications. In addition, the low reset force allow operational pushin cycles at creep speed. Design & Function: The piston rod 2 enters the metering tube 3. The damping medium flows from the pressure chamber 6 through the throttle orifices 4 of the metering tube 3 into the volume balance chamber 5. The nitrogen gas between the outer tube 7 and the metering tube 3 is compressed and stores the energy required for the reset of the piston rod. When the piston rod 2 returns to the initial position, the damping medium flows back into the pressure chamber 6.

We install the necessary hoses between hydraulic power units and press cylinders. We also create piping and circuits for thermal oils and cooling water.

Industrial hydraulics are an essential part of numerous industrial applications and play a crucial role in controlling machines and systems. At AIS Hensch Automation-Industry-Solution, we offer a comprehensive selection of high-quality industrial hydraulic components and systems designed for reliability, efficiency and performance. Precise Control and Performance: Our industrial hydraulic solutions provide precise control and performance for various applications, be it manufacturing, mining, construction or other industrial areas. By using high-quality components and state-of-the-art technologies, we ensure reliable and efficient performance. Versatility and adaptability: Our range includes a wide range of industrial hydraulic components, including hydraulic cylinders, valves, pumps, motors, hoses and much more. These components are suitable for a wide variety of applications and can be flexibly adapted to the specific requirements of our customers.

Hydraulic Saws

Hydraulic Compressors

Hydraulic Ventilators

Hydraulic Drilling Machines Hydraulic Core Drills Hydraulic Earth Augers Hydraulic Mounted Earth Augers Hydraulic Ground Drivers Hydraulic Post Drivers Brochure Drilling Machines Screw Drivers Hammer Drills Impact Wrenchs Hydraulic Hammer Drills Hydraulic Sinker Drills Hydraulic Impact Wrenches Hydraulic Angle Drilling Machine Valve Opener Hydraulic Post Puller Hydraulic Self Driving Drilling and Pile-Driving Machines

outside thread M10 x 1, CE-0085CQ0255

The pumps of the 3 series deliver operating pressures up to 250 bar and volumetric flow rates of up to 400 l/min and are the preferred choice in channel and tube cleaning applications.The seal system of this plunger pump is very easy to maintain due to fewer wearing parts. The ceramic plungers used are highly resistant to acid and alkaline liquids.

The ARP (Abrasive Resistant Pump) series was developed specially for the conveyance of water contaminated with grainy or fibrous solids. The ARP highpressure pumps deliver operating pressures up to 400 bar. The pumps also work reliably at a solids concentration of up to 3,000 mg/l and a grain size of up to 300 μm.

The highpressure pumps of the 2series with operating pressures up to 750 bar and volumetric flow rates up to around 230 l/min are ideal for cleaning pipes and tube bundles, containers and containers.The seal system of this plunger pump is very easy to maintain due to fewer wearing parts. The ceramic plungers used are highly resistant to acid and alkaline liquids. The 2series impresses with a good price/performance ratio due to long service lives – even in rough everyday work.

With operating pressures of up to 1,000 bar, the Yseries pumps are ideally suited to a wide variety of cleaning work, e.g. in the chemical industry, oil and gas industries as well as in the area of ship cleaning. Due to the small size and low weight, they can be easily installed in unit with very small base frames.

The highpressure pumps of the Z series deliver operating pressures up to 1,500 bar. With a high number of pressure and nominal flow rate combinations, the pumps are preferably used in industrial cleaning, paint stripping and also in descaling.For pumps with an operating pressure of more than 1,000 bar, hard metal plungers are used, which are particularly stable in order to guarantee a long service life and thus low maintenance costs.

With the builtin central valve design, these plunger pumps also have high volumetric efficiencies at high pressures. The carbide plungers used are extremely robust, provide long service life at very high pressures of up to 3,000 bar, and can therefore guarantee low maintenance costs. This makes the pumps of this WOMA series ideal for separating, disassembling, stripping and derusting with high pressure water.

220 g / 400 ml, capacity 3 h, 70 % butane, 30 % propane