Plastic material processing - Import export

Hedgehog fingers/ hedgehog mats/ hedgehog bands are used for safe transport of sensitive and pressure-sensitive fruit as well as vegetables. The hedgehog tapes can even be glued with a PVC carrier tape. Thanks to an approval according to various regulations of the EU, we can offer you a top material with the casting polyurethane Intec E for extreme applications in contact with food. Whether for small quantities from 1 or for large-volume components weighing up to 900 kg, Intec E covers the entire range in hardnesses from 45 Shore A to 93 Shore A. If you need large quantities, we offer food contact approved materials in injection molding with up to 6 kg weight and 1.5 m² area.

Pipe lining made of cast polyurethane (75 Shore A). The lining is held from the outside via two flanges. Due to the extremely good abrasion resistance you have proven our linings!

The screw elements can be mounted on a square shaft. You transport bulk materials into bins or silos via rotary movements.

OSKAR S M-800 is especially formulated for mouldings with high exoterm temperature or preheated moulds in polyester, epoxy, aluminium or nickel. lt contains a mixture of high quality synthetic waxes and lubricants, to provide an outstanding heat resistant mould protection and easy release of finished parts.

Household appliances are subjected to heavy use every day. For this reason, top quality is just as important as maximum functionality and design. Products and solutions from Weber Plastics Technology distinguish themselves with their well conceived, detailed solutions.

Customer requirements for environmentally friendly products with high design standards, economical production methods and maximum safety have led them to rely on our expertise and technologies since 1959.

We produce blanks from plastic in line with your specifications. Upon your request, we also process pellets specified and also provided by you in our injection molding department. We keep a wide range of common plastic grades in stock, which we process into test specimens of various sizes according to your specifications. On request we also procure special materials and process these in line with your specific requirements. We process every available type of pellets to form DIN A5 format sheets or smaller sheets lap shear test specimens 100 x 25 x 3 mm dumbbell test specimens We deliver various surface finishes structured high-gloss automotive graining used by a wide range of car manufacturers We deliver every SMC quality depending on the availability of prepregs with class-A finish also in automotive quality Types of plastics ABS, PC, PE, PMMA, POM, PP, PS, PVC, PET, PTFE, PA6, PA6.6, PU, Polymer-based glass fiber-reinforced plastics

100% No: 1 Grade Carnauba Base. OSKAR'S M-700, especially formulated for easier application to polyester- and epoxy moulds. Highly heat-resistant. Provides outstanding mould protection and easy release of finished parts. Formulated to prevent wax build-up. Silicone free.

A universal fast cutting mixture of fine and medium fine abrasive particles, for outstanding buffing action. Formulated for profes­swnal, high temperature machine buffing, but can also be applied by hand. Especially formulated for the preparation and maintenance of polyester and epoxy moulds or surfaces. Devel­oped tot quick and easy removel of the „coarse marks" and scratches remaining on the surface after the „wet and dry" sanding procedure. M-200 LIQUID EXTRA HEAVY DUTY CLEANER, is the most abrasive cleaner and the first to be used after the sanding procedure - then followed with M-300 LIQUID HEAVY DUTY CLEANER (fine abrasive), for the final high gloss surface. The unique feature of the polishing alumina used for the OSKAR'S M-200 and M-300, is that the abrasive particles „break-down" to finer and finer particle size, during the appli­cation, and thereby ensure both effective and gentle cleaning and polishing action simultaneously, without any possible damage to the gel-coat.

M-50 is an universal, fast cutting formula of medium fine abrasives with extre­mely uniform particles that gives an ontstanding polishing action for high tem­perature machine buffing. M-50 is developed to simplify all common heavy duty buffing, formulated especially for the preparation and the maintenance of Polyester and Epoxy moulds er surfaces. Developed for quick and easy remo­val of coarse marks and scratches, remaining on the surface after the „wet and dry" sanding procedures. For the final deep gloss finish, OSKAR'S M-100 BUFFING AND POLISHING COMPOUND is recommended. Contains no additives harmful to Polyester gelcoats er Epoxy surfaces. Does not contain silicones or waxes.

Available with stainless steel axle with suspension for permanent belt contact. We will be happy to assist you with the initial installation. Thanks to an approval according to various EU regulations, we can offer you a top material with the casting polyurethane Intec E for extreme applications in contact with food. Whether for small quantities from 1 or for large-volume components weighing up to 900 kg - Intec E covers the entire range in hardnesses from 45 Shore A to 93 Shore A.

ProTec designs and supplies innovative solid-state polymer post-condensation lines and complete PET bottle flake recycling lines. The batch tumble reactor which combines homogeneous mixing with short processing times is the keystone of the line. The IV value (intrinsic viscosity as a yardstick for molar mass) of polyesters (PET, PBT, PTT etc.) and of polyamides (PA6, PA66 etc.) can be purposefully increased by precise control of temperature, vacuum and processing time, with or without defined addition of auxiliaries.

With the METROFLOW gravimetric material loader, plastic processors can automate important areas of the production process cost-effectively and efficiently. The METROFLOW weighs every single load and evaluates the results, with a guaranteed precision of <1%. This improves the entire material management process and allows for full traceability. The material loaders come in 6, 10 and 30 liter volumes. The METROFLOW series is part of the motan range of products and systems for all stages of management, conditioning and preparation of plastic granules. The design quality, plus the engineering, ensures high performance and reliable operation.

Efficient, accurate material drying is a crucial element in the processing of engineering plastics to ensure impeccable product quality. LUXOR CA A series compressed air dryers with ETA­-process® and ETA plus® energy saving technology are specifically designed for supplying dried plastic granulate for many different plastics processing applications, with material throughputs up to 20 kg/h. Dryers can be mounted directly on the throat of the processing machine or on an adjacent support frame.

In the plastics compounding and manufacturing process there are many powders (all with different flow properties) which require handling. For the vacuum conveying of both free-flowing and non-free-flowing powders, motan has a solution. The METRO P series of hopper loaders are available in two versions and guarantee reliable and dust-free conveying. The METRO PC system loaders are designed to be integrated into centralised motan conveying systems. The METRO PB single loaders are designed to be used as a “stand-alone” solution. From the material source right through to the point of processing, motan offers the ideal solution for your powder handling requirements.

With the METRO G/F/R material loaders, large quantities of granulate, dusty regrind and flakes can be conveyed automatically to the hopper of a processing machine, drying bin or day bin. Filters with sophisticated cleaning technology and large outlet flaps guarantee trouble-free operation. Via the hinged lid, free from vacuum and material hoses, the loaders can be quickly and easily cleaned during material changes.

Metal separators from motan can be installed at various locations in a production and for multiple applications. The metal separators prevent damage to your processing machine, tooling and end-products