Waxed - Import export

The PMMA BLANK is developed to be used in milling machines for making temporary restorations, for gingiva formation after placing dental implants and for accurate determination of the occlusal contacts before placing zirconium prosthetic structures. The WAX BLANK are used in the fabrication of wax modeling, in the lost wax process for casting, making denture restorations and for frameworks for crown and bridge models . It was developed for cast and pressing techniques.

The Mantis hard wax is a full body depilatory wax . The Mantis hard wax can be applied safely in areas of the body such as the face and the delicate areas.

Wax release agents can be produced in a wide variety of compositions and qualities. These industrial products are typically used as release layers in boat building, as shoe soles, bumpers, dashboards or as PU-foam. You can find detailed information about our range of products on the website www.oskars.biz

AUTOSOL® DEWAXER Highly effective dewaxer for removing waxes, oil, grease, resin, tar and bitumen from machines, engines and new vehicles. Also ideal for cleaning before painting, priming, coating, etc. Suitable for manual use and in high-pressure devices.

AUTOSOL® DYNAMIC MARINE CERAMIC SHIELD LIQUID WAX The product coats gelcoat and paint surfaces on boats with an effective protective shield against weather and environmental influences. It protects both new and old, refurbished gelcoat and paint surfaces. The superior performance of synthetic SiOx components and natural wax gives the surface extremely strong hydrophobic, beading and water-repellent properties as well as brilliant shine, impressive color depth and smooth smoothness.

AUTOSOL® Marine Ceramic Liquid Shield Wax The product coats gelcoat and paint surfaces on boats with an effective protective shield against weather and environmental influences. It protects both new and old, reconditioned gelcoat and paint surfaces. The superior performance of synthetic SiOx components and natural wax gives the surface extremely strong hydrophobic, beading and water-repellent properties as well as brilliant gloss, impressive colour depth and supple smoothness.

AUTOSOL® MARINE BOOTSWAX Thin, long-term protective hard wax without abrasives. Leaves a weather-resistant, high-gloss protective layer that protects against wear and UV radiation.

AUTOSOL® NANO WAX FOR MATTE PAINT Combination of the latest high-tech nano-components and high-performance waxes for long-lasting protection against environmental influences. The elegant matt look is not altered.

AUTOSOL® EXPRESS WAX FOR MATTE PA INT A combination of the latest high-performance waxes (including carnauba wax) for fast, uncomplicated and long-lasting paint sealing.

AUTOSOL® WASCH & WACHS is the easiest way to clean and care for your vehicle in just one step. Thoroughly dissolves road dirt Coats the paint with a durable protective layer Enhances gloss High-foaming with a pleasant fresh odour Creates an exceptional water repellent effect after rinsing

AUTOSOL® HARTWACHS Weather-resistant wax composition for sealing new and old, thoroughly cleaned paint surfaces. Contains selected waxes, silicones and polymers for long-lasting protection. Creates a deep coloration and brilliant shine. Suitable for all glossy paintwork.

OSKAR S M-800 is especially formulated for mouldings with high exoterm temperature or preheated moulds in polyester, epoxy, aluminium or nickel. lt contains a mixture of high quality synthetic waxes and lubricants, to provide an outstanding heat resistant mould protection and easy release of finished parts.

In addition to cleaning agents the Wachsfabrik Segeberg GmbH offers a wide range of wax-, solvent- and soap-based care products. These include among others car waxes, self-shining waxes and floor polishers, leather greases, shoe polishes or wiping waxes. Likewise, in the field of care products the individual consultation of the customer as well as the flexibility of development and manufacture of the products is a priority.

Preservation of bare metal surfaces of all kinds, which are stored for longer periods and are subject to effects of weathering (tropics, ocean, industrial atmosphere) Ideal on-call and storage protection for spare parts with possibility of direction installation Advantages and benefits Highly effective due to good film-forming properties Outstanding corrosion and oxidation protection No degreasing prior to commissioning required, as compatible with all lubricants Waterproof and resistant to weathering Suitable for all climate zones No surface discolouration NSF H2 registered (only OKS 2100) Also available as spray version OKS 2101

Simple and gentle car wash including waxing in one operation. Washing, rinsing and brief re-leathering. Other sizes available on request

100% No: 1 Grade Carnauba Base. OSKAR'S M-700, especially formulated for easier application to polyester- and epoxy moulds. Highly heat-resistant. Provides outstanding mould protection and easy release of finished parts. Formulated to prevent wax build-up. Silicone free.

• Model measurements up to 1.000 x 600 x 500 mm • Same handling as for conventional wax parts • Tool-less and hence more cost-effective process • Single items and small series can be produced within a few days • High degree of accuracy: ±0.4% (min. +/- 100 µm) • Wax infiltration creates closed smooth surface • Suitable for autoclaves, even for thin-walled shells • Can be burnt out in normal kiln with low emission formation • Does not expand during burn-out process, hence no shell cracking (whether gypsum or ceramics) • Residual ash contents <0.02% for polypor binder type C • All alloys can be used with lost-wax casting process

• Model measurements up to 1.000 x 600 x 500 mm • Same handling as for conventional wax parts • Tool-less and hence more cost-effective process • Single items and small series can be produced within a few days • High degree of accuracy: ±0.4% (min. +/- 100 µm) • Wax infiltration creates closed smooth surface • Suitable for autoclaves, even for thin-walled shells • Can be burnt out in normal kiln with low emission formation • Does not expand during burn-out process, hence no shell cracking (whether gypsum or ceramics) • Residual ash contents <0.02% for polypor binder type C • All alloys can be used with lost-wax casting process

ALWA release wax (art. no. 9516000) is used to release patterns and moulds. ALWA release wax is applied in a thin coat with a brush or a soft sponge. After the solvent has evaporated, a polishable release film is formed.

• Model measurements up to 1.000 x 600 x 500 mm • Same handling as for conventional wax parts • Tool-less and hence more cost-effective process • Single items and small series can be produced within a few days • High degree of accuracy: ±0.4% (min. +/- 100 µm) • Wax infiltration creates closed smooth surface • Suitable for autoclaves, even for thin-walled shells • Can be burnt out in normal kiln with low emission formation • Does not expand during burn-out process, hence no shell cracking (whether gypsum or ceramics) • Residual ash contents <0.02% for polypor binder type C • All alloys can be used with lost-wax casting process

• Model measurements up to 1.000 x 600 x 500 mm • Same handling as for conventional wax parts • Tool-less and hence more cost-effective process • Single items and small series can be produced within a few days • High degree of accuracy: ±0.4% (min. +/- 100 µm) • Wax infiltration creates closed smooth surface • Suitable for autoclaves, even for thin-walled shells • Can be burnt out in normal kiln with low emission formation • Does not expand during burn-out process, hence no shell cracking (whether gypsum or ceramics) • Residual ash contents <0.02% for polypor binder type C • All alloys can be used with lost-wax casting process

INOX glossy wax protects and preserves all painted surfaces.and thus reduces the risk of resoiling. Also suitable for metal, plastic, glass and rubber surfaces. The resulting protective film makes water and dirt roll off easily. The product ensures quick and easy application and leaves no residue. Inox glossy wax brings a significant color refreshment with only little effort. Therefore you will not need any more conventional polishing.

• Model measurements up to 1.000 x 600 x 500 mm • Same handling as for conventional wax parts • Tool-less and hence more cost-effective process • Single items and small series can be produced within a few days • High degree of accuracy: ±0.4% (min. +/- 100 µm) • Wax infiltration creates closed smooth surface • Suitable for autoclaves, even for thin-walled shells • Can be burnt out in normal kiln with low emission formation • Does not expand during burn-out process, hence no shell cracking (whether gypsum or ceramics) • Residual ash contents <0.02% for polypor binder type C • All alloys can be used with lost-wax casting process

• Model measurements up to 1.000 x 600 x 500 mm • Same handling as for conventional wax parts • Tool-less and hence more cost-effective process • Single items and small series can be produced within a few days • High degree of accuracy: ±0.4% (min. +/- 100 µm) • Wax infiltration creates closed smooth surface • Suitable for autoclaves, even for thin-walled shells • Can be burnt out in normal kiln with low emission formation • Does not expand during burn-out process, hence no shell cracking (whether gypsum or ceramics) • Residual ash contents <0.02% for polypor binder type C • All alloys can be used with lost-wax casting process