Welding - Import export

Dr. Paul Lohmann® offers Dipotassium Oxalate 1-hydrate as fine powder and as crystals in chem. pure. In the oral care sector, it is used for pain desensitization. For industrial applications, it is used as a potassium source for plasma welding electrodes, complexing and precipitating agents for metals and for the preparation and modification of catalyst surfaces. CAS 6487-48-5 EINECS 209-506-8 Dr. Paul Lohmann® carries out product and application development in close cooperation with customers. This includes the adaptation of chemical and physical parameters such as bulk density, wettability, particle size, purity or pH-value.

Plastic for welding … Welding is often the simplest and best way of fastening. The range of different perforated plates offers a wide range of applications. Size and quantity of the welding joints depend on the substructure and must be defined on site. Please note that the perforated metal sheet can under no circumstances take over any static functions. The secutex buffer pad is simply disconnected by grinding away the welding spots. These are the advantages Simply weld onto the item to be welded No need for repeatable holes in the workpiece No holes in the secutex impact protection material Applications On all metal surfaces On thin metal walls Everywhere where screwing is not possible or screw holes are unwanted Examples Collecting basins Ramp protection metal boxes Container Forklift Gripper Girder protection Pallet truck 1. Perforated metal sheet, overhang at the side This version is suitable for welding onto flat surfaces and extrawide profiles of construction steel.

Whether for manual welding in steel construction with 15-18 kg spools or for semi-automated and fully automated welding with drums of up to 750 kg wire weight, WDI has the right drum in its range for every application. Container types for unalloyed and medium-alloyed shielding gas welding wires

Whether for manual welding in steel construction with 15-18 kg spools or for semi-automated and fully automated welding with drums of up to 750 kg wire weight, WDI has the right drum in its range for every application. Container types for unalloyed and medium-alloyed shielding gas welding wires

Whether for manual welding in steel construction with 15-18 kg spools or for semi-automated and fully automated welding with drums of up to 750 kg wire weight, WDI has the right drum in its range for every application. Container types for unalloyed and medium-alloyed shielding gas welding wires

Whether for manual welding in steel construction with 15-18 kg spools or for semi-automated and fully automated welding with drums of up to 750 kg wire weight, WDI has the right drum in its range for every application. Container types for unalloyed and medium-alloyed shielding gas welding wires

Whether for manual welding in steel construction with 15-18 kg spools or for semi-automated and fully automated welding with drums of up to 750 kg wire weight, WDI has the right drum in its range for every application. Container types for unalloyed and medium-alloyed shielding gas welding wires

Whether for manual welding in steel construction with 15-18 kg spools or for semi-automated and fully automated welding with drums of up to 750 kg wire weight, WDI has the right drum in its range for every application. Container types for unalloyed and medium-alloyed shielding gas welding wires

Whether for manual welding in steel construction with 15-18 kg spools or for semi-automated and fully automated welding with drums of up to 750 kg wire weight, WDI has the right drum in its range for every application. Container types for unalloyed and medium-alloyed shielding gas welding wires

Whether for manual welding in steel construction with 15-18 kg spools or for semi-automated and fully automated welding with drums of up to 750 kg wire weight, WDI has the right drum in its range for every application. Container types for unalloyed and medium-alloyed shielding gas welding wires

A new generation of bright welding wires With the development of WDI PLATINARC, we have succeeded in combining the good properties of copper-plated and non-copper-plated welding wires. The Platinarc welding consumables are characterised by therefore by: Low contact tip wear Best wire feeding properties Minimal silicate precipitation in the weld sea Low splash formation Low copper content in welding fumes Stable electric arc

WDI's welding wire production at the Hamm/Westf. and Rothenburg/Saale /Wettin.Löbejün) sites can look back on a history of almost 50 years. Unalloyed and low-alloyed inert gas and submerged arc wire electrodes have been manufactured at WDI's main plant in Hamm/Westphalia since 1975 and at WDI in Rothenburg in central Germany since 1993. Production at both sites was gradually expanded and today, with a production capacity of up to 60,000 tonnes p.a., is one of the largest production facilities for welding wires in Europe. There is hardly a steel processing company in Germany or Europe that is not familiar with the wire electrodes from Hamm and Rothenburg. Whether for manual welding in steel construction with 15-18 kg spools or for semi-automated and fully automated welding with drums of up to 750 kg wire weight, WDI has the right drum in its range for every application.

Stainless steel system for cleanroom production with 400 W laser system Positioning the laser head using a 3-axis servo system Stainless steel lifting door with inspection window.

Whether for manual welding in steel construction with 15-18 kg spools or for semi-automated and fully automated welding with drums of up to 750 kg wire weight, WDI has the right drum in its range for every application. Container types for unalloyed and medium-alloyed shielding gas welding wires

eim Klicken auf die Ergebnistabelle öffnet sich das entsprechende Datenblatt, bitte beachten Sie die Einträge für Basismaterialien im Datenblatt

Tungsten inert gas (TIG) welding offers many advantages over other fusion welding methods, such as the complete absence of spatter and low welding-fume emissions. Since TIG welding uses a non-consumable electrode, the process is ideal for welding so-called root passes or in forced positions due to the decoupling of current and welding consumables.

EWM welding consumables for MMA welding Welders can choose between different stick electrodes with different coating materials to work with: — unalloyed steels — low-alloy heat resistant steels — high alloy steels — Copper-based materials — Cladding

EWM welding consumables for MIG/MAG welding Welders can choose between different welding rods with different diameters and materials to work with: — unalloyed steels — low-alloy steels — high alloy steels — Nickel-based materials — aluminium alloys — Copper-based materials — Hardfacing

— GMAW standard and pulsed welding — Synergic characteristics for steel, CrNi and aluminium — MMA welding and TIG liftarc welding — Perfect for welding self-shielding flux cored wires — Infinitely adjustable arc dynamics (choke effect) — Synergic or manual welding operation — Interval welding — Adjustable gas pre- and post-flow time — Portable, compact — Saves power through highly efficient performance — Robust casing suitable for construction site use — 4-roll drive for 0.8 mm and 1.0 mm steel wires — Easy, tool-free change of welding polarity — IP23 spray water protected — Wire spool diameter up to 200 mm/D200 — 3.5 m mains supply lead with 16 A shock-proof plug — Mains connection 230 V/16 A — High mains voltage tolerance +15%/-40% and therefore fully generator-compatible — Free WPQR package for certification up to and including EXC2 in accordance with EN 1090 and for welding of unalloyed steels up to and including S355

Water-cooled MIG/MAG welding torch with ergonomic grip and ball joint, anti-kink spring on welding torch as well as on connection. Can be connected to all machines with standard Euro torch connector. Type-related standard consumables M6/M8 UM 240 W - DC CO2 300A at 100% \ DC M21 270A at 100% UM 401 W - DC CO2 400A at 100% \ DC M21 350A at 100% UM 501 W - DC CO2 500A at 100% \ DC M21 450A at 100% Available each with 3 metre, 4 metre and 5 metre hose package.

TIG inverter welding machine with high frequency start. Thanks to the modular structure, the machine can be retrofitted with an additional water block without using any tool. With the two available control variants (Smart 2.0 or Comfort 2.0), a variety of functions are available: — TIG Liftarc welding without HF — MMA pulsing — TIG pulsing (sec/kHz) up to maximum 15 kHz — TIG AC welding — TIG AC pulsing (sec/special) — Non-latched/latched operation — Adjustable up-slope and down-slope time — Adjustable gas pre- and post-flow time — MMA welding — Adjustable hot start current and hot start time — Adjustable Arcforce — Antistick function Available as DC and AC/DC variant with optional torch connection for standard start/stop welding torch or up/down torch.

Gas-cooled PM MIG/MAG-welding-torches, optional function torch with high-quality OLED graphic display. Available as PM 221 up to 250A, PM 301 up to 330A and PM 401 up to 450A — Secure hold thanks to rubber inserts in the grip — The flexible ball joint makes it comfortable to work with, even in difficult spots Highlights function torch: — Automatic LED lighting when welding torch is moved Display and adjustment directly from the workplace- — Welding current and wire feed speed — Voltage correction — Program and JOB selection — Welding process switching — Interferences and error messages — 2-/4-stroke — Choke — Welding processes (standard, pulse, coldArc, rootArc, forceArc) Also supports the Xnet welding management software: — Selection of the welding task according to the welding sequence plan — Component management

TIG welding torches, gas- or water-cooled from 150 A (gas-cooled) up to 400 A (water-cooled). — TIG welding torch with a highly flexible hose package — Ergonomic GRIP handle for a secure hold and ergonomic use — Excellent HF reliability — Ready to weld with tungsten electrode, gas nozzle and back cap

— MIG/MAG pulse welding machine with optimised synergic characteristics for welding steel — Pulsed MIG/MAG welding, MIG/MAG welding, MMA welding and gouging — Significantly less spatter formation and therefore less finishing work thanks to the pulse function — Welding with solid wire and flux cored wire — Drive 4X Steel: Connection socket for electrode holder on the wire feeder as standard — Drive 4X Steel D200: Adjustment of the gas quantity directly on the wire feeder via the gas control valve as standard. — Factory-fit option: Extra gas valve for increased safety — Infinitely adjustable arc dynamics (choke effect) — Adjustable start and end-crater functions — Synergic or manual welding operation

Gas-cooled MIG/MAG welding torch with ergonomic grip and ball joint, anti-kink spring on welding torch as well as on connection. Can be connected to all machines with standard Euro torch connector. Type-related standard consumables M6/M8. Available in 4 variants: UM 15 G – DC CO2 180 A at 60% \ DC M21 150 A at 60% UM 24 G – DC CO2 250 A at 60% \ DC M21 220 A at 60% UM 25 G – DC CO2 230 A at 60% \ DC M21 200 A at 60% UM 36 G – DC CO2 300 A at 60% \ DC M21 270 A at 60% Available each with 3 metre, 4 metre and 5 metre hose package.

— Degaussing of pipes and metal sheets — Automatic degaussing before welding — Dependable degaussing for better welding results through stable welding process without magnetic deflection, minimisation of finishing work — activgauss (10–250 A) – degaussing during welding: — Avoids moving up of magnetic field during the welding process in case of very long and strongly magnetised components — Portable and robust — Quick connection at the pipe by means of three load cables — Use at -25 °C to +40 °C with mains voltage tolerances of +/- 20% Advantages of degaussing: — No deflection of the arc by residual magnetism in the workpiece — Prevention of lack of fusion due to insufficient sidewall fusion — Minimisation of finishing work — Cost-efficient and high-quality results — Set: Degauss 600 degaussing machine, two 5-metre, 35 mm² load cables, one 20-metre, 35 mm² load cable, RT DGS1 remote control and 5-m connection cable

Maximum operating convenience, long service life and all pulse, standard and innovative welding processes optimised and included in the machine at no extra charge. The members of the Titan XQ family are taking a quantum leap in welding technology. Here, perfect weld seams are already pre-programmed for low- and highalloy steels and aluminium in all material thicknesses and all positions. Thanks to the many options and accessories for the Titan XQ puls series, you can put together your machine in the way that best suits you, your needs and your applications. An exceptionally long duty cycle of 100% at up to 350 A, for example, makes for effective working. Perfect welding becomes sustainable – 24 hours a day, 7 days a week.

— Inverter welding machine, DC — Very light-weight, only 4,7 kg – housing made of aluminium and impact-resistant plastic — Portable, shoulder strap — MMA and TIG lift arc welding — Cellulose electrodes: 100% safe for vertical-down welding — Welding of stick electrodes up to 4 mm — Pulsed MMA welding: — Especially suitable for root welding — Outstanding gap bridging with no sagging of the root side — Fine-flaked weld surface with a TIG look for final passes — Less finishing work thanks to less spatter — Ideal for difficult electrodes — Less distortion thanks to controlled heat input — Pulsed TIG welding with up to 2 kHz — Connection capability for remote control — IP23 spray water protected — Arcforce, hot start, antistick — Energy efficient due to standby mode — 3.5 m mains lead with 16 A earthed plug — Overvoltage protection: No damage to machine caused if inadvertently connected to 400-V mains voltage

The Welding 4.0 quality management system ewm Xnet was specifically developed for the welding production and effectively supports all the employees involved in the welding process (welding coordinator, welder, production manager, manager, etc.). The services provided by ewm Xnet include, on the one hand, the monitoring and the documentation of all welding parameters from any number of networked welding machines. On the other hand, it creates and manages the welding documentation (WPQR, WPS, welding certificates) digitally and opens up numerous evaluation options. Additionally, the Xnet welding management system can take over the management of components including all the information associated with it, such as component identification via bar code, material consumption, welding parameters, etc. Thanks to the modular structure, the Xnet welding management system can be used in small, medium and large companies.