Monitors- computer - Import export

Optical inspection with the new stand-alone camera system allows for inexpensive and flexible testing of several production processes. Inspection with the high definition system camera (18/42 megapixels) is controlled and analyzed by a Microsoft Windows-based computer running the professional modus AOI-software. Characteristics Single system for the inspection of objects within an offline application (One Piece Flow). Combination of various inspection tasks such as SMD-THT-UV, bond inspection as well as laser solder inspection. Typical tests include confirmation of the mechanical assembly, presence, placement and orientation of plugs, stickers, fixings, reading of barcodes and data-matrix codes.

The almost maintenance-free modusAOI MCS18/42-Inline was specially developed for transport conveyor modules in production lines. Existing lines can easily be retrofifitted with this system. The small, cost effective system comes with a 18 or 42 megapixels camera, control unit, modus software and led lighting inclusive controller. Characteristics: Single system for inspection of printed circuit boards from the top side. Combination of diverse application tasks such as SMD placement, pre-reflow, chip control, THT fitting, conformal coating and full screening for lost components. Reads barcodes and data-matrix codes in any position and quantity even on multi-PCBs.

The MCS42-SEL-AL is a cost effective camera-based AOI system. This solution is optimized for economical and flexible inline inspection of the several production processes. The small and inexpensive system comes with a 42 megapixel, high-definition industry camera and a PC equipped with the powerful modusAOI software whose development includes professional experience of two decades. Characteristics: Single system for inspection of objects. Combination of diverse application tasks in the THT area which take place before a wave soldering or selective soldering oven. Typical tests include confirmation of the mechanical assembly, presence, placement and orientation of plugs, stickers, fixings, reading of barcodes and data-matrix codes.

The system comes with four 42 megapixel cameras and a high-performance control unit. LED lighting including LED control is also included in the delivery. The entire picture of the image analysis is orthogonally calibrated. Characteristics: This system can meet the toughest requirements for the inspection of bipolar plates in various production stages. The system has been adapted to the high requirements of the inspection of bipolar plates. The image acquisition time of approx. 2,5 seconds with a resolution of 24 um is outstanding. Inspection with the high-resolution system cameras is carried out using the tried and tested modusAOI software. Test possibilities: Position and minimum thickness of the graphite coating in the central area Checking the surfaces that should not be coated Coating contamination (graphite/screenprint) Testing of a defined target contour in screen print Damage to the metal at the edge (balcony) of the workpiece

The MLD1200 V2.0-OS is a single-sided offline AOI system for the inspection of assembled printed circuit boards from the top. It has one multi-LED illuminated image scanner as well as our patented parallax-free lenses. It includes a modus control unit with the latest modus software. An optional trolley is available. Characteristics: Single system for inspection printed circuit boards from the top side. Combination of different inspection tasks such as SMD placement, THT solder joints, conformal coating and full screening for solder beads (solder balls). Capture of any number of barcodes and data-matrix codes on the multi PCB. Scan range 300 x 400 mm

The MLD1200 V2.0-DS is an offline dual AOI system for the inspection of assembled printed circuit boards from both sides at the same time. It has two multi-LED illuminated image scanners as well as our patented parallax-free lenses. It includes modus control units with the latest modus software. An optional Trolley is available. Characteristics: Dual system for double-sided simultaneous inspection for both sides of printed circuit boards. Combination of different inspection tasks such as SMD placement, THT solder joints, conformal coating and full screening for solder beads (solder balls). Capture of any number of barcodes and data-matrix codes on the multi PCB. Shows the test result of both sides at once. Scan range 300 x 400 mm

The triple AOI system is designed for simultaneous inspection at the return conveyor and from top and bottom before and after wave soldering oven. It has three multi-LED illuminated scanner units, as well as patented special optics which generate a parallax free image. The System includes three modus control units. The transport module has a length of 1200mm (47.2 in.). Characteristics: Triple system for simultaneous inspection of top and bottom before and after the soldering process. Optional automatic cleaning of the lower inspection area with an air knife. Combination of different inspection tasks such as SMD placement, THT solder joints, conformal coating and full screening for solder beads (solder balls). Capture of any number of barcodes and data-matrix codes on the multi PCB. Scan range 420 x 530 mm

The AOI system is designed for simultaneous inspection of printed circuit boards top and bottom side. It has two multi-LED illuminated scan units with parallax free view. Those systems are also available for single side as for top or bottom view. The system includes complete set of modus control units. The transport module has a length of 1200mm (47.2 in). Characteristics: Double System for dual side simultaneous inspection for printed circuit boards. Simultaneous display of all results of double side inspection. Combination of different inspection tasks such as SMD placement, THT solder joints, conformal coating and full screening for solder beads. Capture of any number of barcodes and data-matrix codes on the multi PCB. Scan range 420 x 530 mm or 300 x 400 mm.

Samsung 32" Smart LED Monitor (LS32AM502NRXEN) original & new

VGA Cable 5FT, VENTION VGA Male to Male Video Coaxial Computer Monitor Cable with Dual Ferrite Cores Supports 1080P HD for PC,Laptop,Projectors,HDTVs,Displays

width 68 cm age 2006 servo punch machine computer control with monitor touch screen Delivery time: immediatelly from stock Ref: BO240057A Please ask for price. We ship and install worldwide!

width 115 cm age 2008 computer control with monitor touch screen colour screen air table with blower 2 side tables with airbed rear table cover Delivery time: immediately Ref: PO210136A Please ask for price. We ship and install worldwide!

width 78 cm age 2001 computer control with monitor light barrier air table 2 side tables rear table cover Ref: PO220284A Please ask for price. We ship and install worldwide!

width 66 cm age 2018 computer control with monitor touch screen light barrier rear table cover Delivery time: immediately Ref: PO210127A Please ask for price. We ship and install worldwide!

age 2012 reelstand - web feder newspaper- and commercial presses computer control with monitor web width 400 - 1.000 mm Patras M manual web supply Delivery time: immediately from stock Ref: KB210052A Please ask for price. We ship and install worldwide!

max. size 35 x 50 cm age 2000 computer control with monitor 12 stations gathering machine highpile feeder 1 hand feeding station left marking device stream delivery intermediate element with jogging device stitch-fold-frontcut unit SFT 350 Ref: MK220116A Please ask for price. We ship and install worldwide!

Streak-free cleaning for screens, smartphones, PCs, keyboards and tablets. Eliminates dust, streaks and fingerprints. Suitable for LCD/LED screens, TFT monitors, computers, notebooks, tablets, navigation displays, digital cameras, smartphones, scanners, printers, keyboards, telephones, etc. Other sizes available on request

HPC-40 is a roller rod chain with clearly dened characteristics developed with regard to modern mechatronic monitoring systems - created to enable reliable performance monitoring. Modern, computer-aided, reproducible manufacturing processes enable a more precise assembly of the individual components thus extending their service lives signicantly. Sensors monitor the wear thus contributing to an extended overall service life od HPC-40. For HPC-40, it was possible to extend the breaking load by 30 % and the fatigue strength by 40 %, as we were able to eliminate the risk of fatigue factors. Existing plants can, of course, be retrotted with the new HPC-40. HPC-40 helps fully utilise the features and functions of a modern ContiRoll® in a fast continuous operation