Rotors - Import export

Electrical Steel: rotor and stator sheets as full service Due to the growing demand for electrical steel, we have bundled our technological resources and expanded the production of pure sheet metal blanks to complete packages in stator and rotor sheets. We are therefore able to provide you, our customers the service of complete sheet metal stacks baked, laser-welded or punched packaged in the electrical steel sector. Due to our extremely thin cutting gap of just 0.07mm - as much as the diameter of a human hair - we are able to produce the smallest contours. The extreme power density at a max. laser power of 1,000 watts enable electrical sheets based on baked varnish technology with the lowest possible edge zone melting - burr-free. Everything 100% "Made in Germany" in packaged quality - usually tolerance class T7. Usual delivery times are approx. one week for cutted sheets, 2-3 weeks for baking or welding parts. Let’s get in contact for your new e-drive, rotor or stator!

Rotor

Precision machinery parts,Brass turning and milling.Electric zinc surface treatment

ballbearings (can be relubricated) robust and less influence of dirty media self supportingno additional support necessary housing stainless steel rotor stainless steel PRESSURE MAXIMUM water 40 bar DN 50 (2") 50 bar DN 8 (1/4") DN 10 (3/8") DN 15 (1/2") DN 20 (3/4") DN 25 (1") DN 32 (1 1/4") DN 40 (1 1/2") TEMPERATURE MAXIMUM 130 °C water SPEED MAXIMUM 750 1/min DN 50 (2") 2500 1/min DN 32 (1 1/4") DN 40 (1 1/2") 3000 1/min DN 25 (1") 3500 1/min DN 8 (1/4") DN 10 (3/8") DN 15 (1/2") DN 20 (3/4") SIZEDN 8 (1/4") DN 10 (3/8") DN 15 (1/2") DN 20 (3/4") DN 25 (1") DN 32 (1 1/4") DN 40 (1 1/2") DN 50 (2")

Optimum crushing instead of cable salad The very best method for crushing of cables or electrical scrap has brought many a tool to its limits and yet this is a frequently underestimated source of money. In addition to expensive copper, the recycling process also recovers aluminium and noble metals. In order to reach these valuable raw materials, robust preliminary crushing units are used, followed by a second crushing cycle. The demands on the crushing knives cannot be ignored and they must therefore be very tough. We are at the side of our partners to give advice on the selection of ideal materials and the best heat treatment.

For our customers in the automotive and housing industry, we produce deep-drawn stainless steel pots with an integrated axle as a monobloc component. These are used in water pumps for electric vehicles. Our customer from the automotive industry needs pots with an integrated axle that holds a rotor. Up to now, the pot and axle have been joined in a centred manner by means of welding. The customer's wish was to produce a one-piece component to avoid welding. Deep drawing is the ideal technology for this. The size of the component required larger presses than were previously available. Therefore, we first developed tools as prototypes for larger presses on behalf of the customer. After practical tests at the customer's premises as well as at the end customer's, our client decided on a tool that was ideally suited for the production of the component in series.

Shinano Kenshi is one of the world's leading OEM manufacturers of stepper motors, servo motors, brushless DC motors and custom motors.

Recycling made easy Our machine knives, of uncompromising quality, have been used for decades in recycling for tyre crushing. Even when separating rubber and spring steel, they have been proven in practice day by day. Whether shredder knives, spacers, scrapers or sealing gaskets, shredder teeth for multipleshaft shredders, rotary and stator knives for granulators or machine knives for guillotines Our complete range of products also covers the most demanding challenges in recycling.

Clothing instead of landfill PET must beone of the most interesting recycling materials of recent years as, during this time, not only new bottles, but also clothing and much more have been produced from recycled bottles. In Germany alone, each year the volume of PET bottles discarded when empty has exceeded 400,000 [tonnes], 96% of which is taken to professional recycling. An additional 60,000 tonnes arises annually as packaging material. However, PET is an extremely abrasive material, which exacts enormous demands on the tools used in recycling. Our knives have been proven by their high resistance to wear, and we also supply, in addition to our proven quality standards, extremely hardwearing special qualities.

The YSTRAL high-performance dispersing machines work according to the rotor-stator principle with high shear gradients. The extreme fine distribution of solids (suspensions) and liquids (emulsions) in presented liquid media is achieved by the perfectly coordinated interaction of various comminution processes. The high-precision dispersion tools are individually adapted to the respective task. Robust rotor-stator tools with a narrow radial gap ensure high shear gradients. A strong dispersing effect is achieved by impact and high-frequency pressure-relief processes. Solid particles and/or droplets are reliably comminuted and homogeneously distributed. Different rotor-stator-pairs allow the adaptation to the corresponding application. No rotating vessel contents - no formation of droplets and no air ingress. No free-running shaft and no free-running dispersing tools. Batch dispersion directly in the vessel.

When operating in crane and port facilities, a braking system must primarily be reliably protected and, secondly, must operate very powerfully. The INTORQ BFK 471 product series combines these two features perfectly. These specially sealed brakes have a newly designed hand-release mechanism which, like the brakes themselves, is IP66 compliant. This series also features high braking torque and requires only a compact installation space.

The YSTRAL inline dispersing machines work according to the rotor-stator system. The dispersing machine is suitable for the production of suspensions, solutions and emulsions in the chemical, food, pharmaceutical and cosmetic industries. Due to the close radial gap between rotor and stator and the high circumferential speed of the rotating rotor, very large shear gradients are generated. The product enters the shear zone through the slots between the rotor teeth and leaves it again via the stator slots. Due to the multi-tooth configuration of rotor and stator, additional mechanical forces act on the product to be dispersed. The product is guided through a rotor-stator system. The liquid is highly accelerated by the inner rotor ring, is completely decelerated at the stator ring and then accelerated again to maximum speed via the next rotor ring. In this way, solid particles and/or droplets are effectively comminuted and homogeneously distributed.

The YSTRAL jet stream mixer fulfils all requirements for a complete and homogeneous mixing of the contents of a vessel. Effective micro- and macro-mixing of the entire contents of the vessel without the introduction of air. Complete mass transfer across all vessel levels due to vertical mixing. Up to 90% of the energy used is converted into vertical flow - no rotating vessel contents. Even heavy sediments are suspended by directed streams. Rotating parts are protected against unintentional intervention. With open tanks no tank fixing is necessary. A fast rotating rotor surrounded by a stator generates a downward directed guide jet which directs the liquid flow directly to the bottom of the container. At the bottom of the container, the stream splits and creates an upward flow on the outer wall. At the surface, the liquid flow is redirected towards the bottom of the tank.

Disc chippers are especially suitable for processing straightly grown round wood into high quality wood chips. The raw material is fed into the chipper via a slanted horizontal feeding conveyor. The disc inside the housing is equipped with knives. The logs are processed to chips between the vertical rotor knives and the counter knives. The chips are discharged below via a discharge chute, with lling level control, to a subsequent conveyor. Advantages High, consistent chip quality Quick, ergonomic knife changes Cutting force supports material infeed Features, Function Chip length 20-25 mm Chip width 4-10 mm Options Adjusting devices for rotor and stator Knives

The rotor debarker is ideal for use wherever reliably and thoroughly debarked logs are required. The abrasive debarking tools make the rotor debarker the rst choice for logs that are especially hard to debark and for frozen wood. The narrow design ensures the parallel position of the logs in the machine. The modular design allows high exibility for a needs-based log feed. Key features Modular design Needs-based conguration according to throughput amount, type of wood, and degree of debarking Debarking by means of abrasive and wear-resistant debarking tools Advantages Adjustable degree of debarking Suitable for frozen logs (permafrost) Suitable for logs with dierent diameters Quiet operation Options 2 or 3 rotors per section

The removal of mineral deposits, concrete, slag, filling compound or similar substances in pipe and sewer systems is made possible by this newly designed nozzle. The substances are separated in their structure by the vibrations in a specific frequency field and detached from the pipe wall. In particular, drainage pipes in landfill or tunnel areas can also be cleaned without any problems. - Not suitable for vitrified clay or clay pipes.

The rotor debarker is ideal for use wherever reliably and thoroughly debarked logs are required. The abrasive debarking tools make the rotor debarker the first choice for logs that are especially hard to debark and for frozen wood. The narrow design ensures the parallel position of the logs in the machine. The modular design allows high flexibility for a needs-based log feed. Features, Function Modular design Needs-based configuration according to throughput amount, type of wood, and degree of debarking Debarking by means of abrasive and wear-resistant debarking tools Advantages Adjustable degree of debarking Suitable for frozen logs (permafrost) Suitable for logs with different diameters Quiet operation Options 2 or 3 rotors per section

Hammer rotor

The standard chain slinger is used with link chains and can also be used purposefully without a guide cage up to DN 300.

The combination chain rotor can be operated with double-row control chains as well as with link chains. Work is more effective as soon as a guide cage is used. Also available in curved version!

Stator packs and die-cast rotors (three-phase) available in IEC fame size 56 – 355, 2-, 4-, 6- and 8-poles . The standard core lengths are available in frame size 56 – 180 from existing stocks .

Our highly flexible SYSTEM aer 1.1 provides fast and safe access for rotor blade maintenance on turbines with a distance tower to tower tip of up to 18.5 m. Functions such as swivelling and transverse movement of the workspace create added value that is reflected in the quality of rotor blade repairs and costenefficiency. In addition, hinged aisles ensure safe working when catching the blade. The geometry of the self-adjusting suspension allows maximum maintenance height up to the blade root. Wind turbines type class V90 to V162 max. blade tip distance 18.5 m Max. wind speed 14 m/s Rotor blade dimensions of 5.30 m x 3.00 m payload of 400 kg Details of the manufacturer at : https://wpsystems.de/system-aer