Mechanical - Import export

From deactivated to as-good-as-new condition: Reduction of SO2/SO3 conversion rate de-activation like new material multiple regenerations possible mechanical quality unchanged life of the catalyst is already redoubled after the first regeneration

Our international bestseller: the VX1000 is a universal 3D printer for industrial applications. The machine is fast, easy to operate and enables you to cost-effectively produce medium-sized molds, cores and models for making prototypes. The VX1000 is also suitable for producing small series. Plastic and sand can be used as the particulate material. The piezo print head system of the VX1000 achieves a resolution of up to 600 dpi. The machine's build space measures 1,000 x 600 x 500 mm. The thickness of a layer applied in one cycle is 150 µm for plastic and 300 µm for sand. In addition, the VX1000 concept is environmentally friendly: In plastic processes, the unprinted particulate material is recyclable.

Through a representative office in Hong Kong, CIC supports the often difficult procurement of technical products from China, e.g.: efficient search for suitable suppliers direct, native speaker contact with the producer Contract design and processing Supplier Qualification Quality monitoring Logistics control ZURÜCK

Cylinders with Ertalyte piston rods are particularly suitable for use in the food and chemical industries. High resistance to acids, good electrical insulating properties, wear resistance, excellent sliding properties and even resistance to gamma rays or X-rays allow it to be used under difficult conditions. For the use of pneumatic cylinders in environments with radioactive radiation, we also stock cylinders with radiation-resistant seals.

Large-volume pneumatic cylinder with through-piston rod for use as a die-cushion press balancing cylinder in a mechanical press.

The VX4000 is the world's biggest industrial 3D printing system for sand molds. It has a cohesive build space measuring 4,000 x 2,000 x 1,000 mm (LxWxH). This machine can be used to economically produce very large individual molds, a great many small series components or a combination of the two. With its uniquely large volume, the VX4000 maximizes productivity and flexibility. The unique and patented layering process was specially adapted for this printer. Instead of lowering the building platform during the printing process, the print head and coater are raised with each layer. As a result, the machine can bear the enormous weight of the building platform, which can be quickly exchanged via a rail—making it possible to print nearly continuously. Sand can be used as the particulate material. The VX4000's print head system can achieve a resolution of up to 300 dpi. A layer applied in one cycle is 300 µm thick.

The VX2000 is a 3D printer for industrial applications. It is a particularly good choice for cost-effectively producing large-format models from sand cores for prototyping. The VX2000 can also be used to economically manufacture small-series components. The machine is fast and easy to operate. The build space measures up to 2,000 x 1,000 x 1,000 mm. The VX2000's print head system can achieve a resolution of up to 300 dpi. A layer applied in one cycle is 300 µm thick.

The VX500 is a 3D printer for industrial applications that has been tried and tested many times over in practice. These machines can be found wherever there is a demand for the straightforward production of prototypes and models. Despite their compact dimensions, they captivate with the features of a high-performance printer, such as multi-jet print heads, integrated material handling and job boxes. The machine is very fast, easy to operate and permits cost-effective production of both individual parts and small series alike. Plastic can be used as the particulate material. The machine's build space measures 500 x 400 x 300 mm. The VX500's print head system can achieve a resolution of up to 600 dpi. The thickness of a layer applied in one cycle is 150 µm. In addition, the VX500 concept is resource-friendly: In plastic processes, the unprinted particulate material is recyclable.

The VX200 is the most compact 3D printer in the voxeljet portfolio. It weighs a mere 450 kilograms and, thanks to its dimensions of only 1,700 x 900 x 1,500 mm (LxWxH), the VX200 can be installed without problems in places where space is tight, such as research laboratories. The machine is very fast, easy to operate and permits the economical production of small prototypes and design pieces. Plastic and sand can be used as the particulate materials. The build space measures 300 x 200 x 150 mm. The VX200's print head system can achieve a resolution of up to 300 dpi. The thickness of a layer applied in one cycle is 150 µm for plastic and 300 µm for sand.

For high temperature applications up to 120 °C

Turned parts with mechanical finishing. Ground, hardened, welded, soldered. Pre-assembled with sealing elements and O-rings.

CNC sheet metal processing, CNC laser parts, stamped parts, fine stamped parts, bent parts, pipe processing, cold forming, heat shielding sheets, deep-drawn parts, sheet metal parts from progressive dies, sheet metal parts assembled, sheet metal parts with surface treatment, sheet metal parts in large series, one-off production, prototypes.

Plastic injection molded parts from all common plastics, prototypes and rapid prototype parts, plastic parts with inserts, plastic parts with paintwork, with chrome plating, with decorative lamination also in leather, rubber parts, rubber-metal connecting parts, parts made of carbon, visible carbon.

With over 20 years of experience, we know the automotive industry very well. With our team of specialists, we take on project management tasks across the entire value chain, particularly in: Technical development: from the first idea, the first components, validation, change management to series production Sourcing and Purchasing: from supplier selection, supplier evaluation, contract award, supplier qualification, tool management, prototypes, fulfillment of contracts, to trouble shooting in the event of contract disruptions Logistics: from the first capacity check, milestone plan, securing deadlines, optimizing deadlines, pre-series, series start-up, securing supplies to inventory optimization Production: from production planning, process optimization, capacity management to the continuous improvement process quality assurance

We are happy to support you by taking on tasks related to the control and coordination of e.g.: Cross-divisional project management Cross-plant project coordination supplier control Vorseriensteuerung Prototypes and test construction Series start-up control component coordination parts management

Thanks to our expertise in mechanical production, we can provide you with effective support in the purchase and procurement of: supplier parts Prototypes Experimental parts Rapid prototypes Sample parts You can obtain these parts directly from us from our supplier network, or we will support you in procuring them from your suppliers by coordinating your development, purchasing, logistics and quality assurance.

Below are a few reference objects that we have been able to work on as part of a wide variety of project tasks in recent years: Audi: all RS models since 2000, R8, R8 2015 Bentley: Mulsanne, Bentayga BMW/Mini: Clubman, 3 series Ferrari: 599 GTO Lamborghini: Gallardo, Murcielago, Aventador Mercedes: S-Class, SLS, Actros Porsche: 997, 911 I panel, door trim, center console, greenhouse, interior trim, trim, steering wheel, seats, carpet trim, infotainment system, instrument cluster, mirror, selector lever, switch panel, trunk, engine compartment cover. Wheels, brakes, wheel suspension, exhaust system, engine components, tank, lines. Plastic injection moulding, metal casting, forging, forming, tube processing, painting, galvanic surfaces, lamination, leather covering, upholstery and sewing.

Single-acting pneumatic cylinder diameter 20 as a spare part for the no longer produced Wabco Westinghouse series 421 427.

Double-acting pneumatic cylinder with piston rod in a special design for use in a press-in device.s

Single-acting pneumatic cylinder with two parallel working piston rods made of brass, nickel-plated or stainless steel.

Double-acting special cylinders with a customer-specific base flange, pre-assembled with fork mounts with flexible rubber bellows over the piston rod to protect against coarse dirt and aggressive environments. Specially designed for use in commercial vehicles or agricultural machinery.

Electromagnetic cylinders and actuators for use in applications where compressed air is either not available, too expensive, too slow or for other reasons is not the optimal solution.

With and without adjustable hysteresis Pressure ranges from -200 to -900 mbar

Available in sizes 1/8 - 1/4 - M10 x 1 - M12 x 1.5 - 1/8 NPT Piston pressure switch with control ranges from 30 to 300 bar Diaphragm pressure switch with control ranges from 0.2 to 100 bar

In sizes 1/8 - 1/4 Control ranges from 0.2 to 300 bar

Control ranges from 30 to 300 bar. In sizes 1/8 - 1/4 - M 10 x 1 - M 12 x 1.5.

Available in many versions for use in cooling, heating, beverage machines, vending machines, household appliances, instrument technology, etc. In metal and plastic cases. With device socket, plug connection, wiring, encapsulated probes. With double NTC/PTC, with analogue signal output

In sizes 1/8 - M14 - M20 Switching ranges from 30 to 130 °C

In sizes 1/8 - 1/2 - 3/8 - M 10 x 1 - M 12 - M14 - M22 Switching ranges from 30 - 90 °C