Straps - Import export

Item No.: 685226 Strap Specification Elastic cord Braided elastic cord ring, rape yellow Model type: S (Standard) Dimension: approx. 60.0 mm wide Material: Polyester Colour: black Property: elastic Elastic Material: Natural rubber Packaging: 50m, rolled, with core

Item No.: 685204 Strap Specification Strap Woven elastic with stitched straps, wire hook and injection-moulded fastening set Model type: C (Customised) Dimension: approx. 40.0 mm wide Material: Polyester Colour: black Property: elastic Elastic Material: Natural rubber Packaging: loose in cardboard box

Item No.: 685226 Strap Specification Strap Strap threaded into injection-moulded fasteners, ends with multilayer stitching Model type: C (Customised) Dimension: approx. 60.0 mm wide Material: Polyester Colour: black Property: elastic Elastic Material: Natural rubber Packaging: packed in cardboard box

Item No.: 685632 Strap Specification Strap Webbing set Model type: C (Customised) Dimensions: approx. 31.5 mm wide Material: Polyester Colour: ceramique Property: non-elastic Packaging: in cardboard box Note Features: Multiple holes, stitchable plastic

Item No.: 685631 Strap Specification Strap Webbing cuts Model type: C (Customised) Dimension: approx. 50.0 mm wide Material: Polyester Colour: black Property: non-elastic Packaging: loose in cardboard box Note Features: Cut and holed by ultrasonic cutter (multiple holes)

High quality strapping solution in widths of 7 - 25mm with a tearing force of up to 9,300 N.

Tracheo-FIX, cannula retaining strap, for tracheostomies, in two parts, without elastic element 2,5cm wide

Tracheo-FIX, cannula retaining strap, for tracheostomies, in two parts, with elastic element 2,5cm wide

We recommend against turning stacked coils upright on the stack. The first choice for the raising of packages delivered in a horizontal position with split straps is therefore always a coil turning seat. However, there is not always a fixed installation for raising narrow coils. The secutex splitband turning strap has two different attachment ends. One end loop of the secutex lifting strap is flat, and can be easily threaded through the gap between the split bands. The flat end loop can then be easily hooked into the forged Cshackle. The protective sleeve is positioned against the “sharp edges“ of the coil. During lifting, the strap moves freely through the protective sleeve while the latter remains motionless against the load. There is no movement, and therefore no wearing against the “sharp edges“. The solution An end loop of secutex lifting slings for slit strips is flat and can easily be pushed into the gap between the slit strips.

The Powerflex protective sleeve helps to effectively increase the friction values of smooth surfaces or to protect the lifting strap against rough surfaces. The particularlyrobust Powerflex penetrates deep into the fibres and also protects the protective sleeve against the penetration of fluids or dirt particles.

This very compact thin layer surrounds the lifting strap either on a single side or completely. It is extremely wearresistant and ideal for very rough surfaces. The Powerflex coating provides additional protection to the textile against dirt and the penetration of foreign particles.

PET strapping is particularly tear-resistant and elastic at the same time. Thus they reliably absorb shocks during transportation and, depending on width, can sustain loads of between 185 and 580 kg. Our PET strapping is available in widths of 9.5 to 15.5 millimeters with tight fabrication tolerances. After use, it can be easily fed back into the material cycle, since it consists of 100 % recyclabled plastic bottles (bottle flakes). It has a high stability for optimal load security. Its constantly high quality ensures a high machine availability. Most frequent fields of application: • Corrugated cardboard industry • Printing industry • General logistics • Electrical industry (TVs, cooling/heating units, kitchen equipment) • Automotive industry (equipment and spare parts for cars, trucks and bikes)

• Corrosion-resistant ultrasonic sealing system with electronic self-calibration • High-end Standard 6 sealing system • Easy accessibility and tool-free disassembly of strap way components • Wear-free DC drives with integrated electronics • Stepless turnable operation panel for many-sided operation • Adjustable strap tension via potentiometer • Switching from maximum to material-friendly Eco-speed in the control • Quick strap coil change • Strap coil changeable from the front and the side • Automatic strap threading system • Strap end detection with ejection of remaining strap • Automatic strap loop ejection • Extremely low energy consumption • 4 castors, 2 of them lockable (Ø 80 mm) • CE marking inclusive conformity declaration • Soft strapping selectable for sensitive packages • Machine completely corrosion-resistant (main use of V4A stainless steel) • IP 56 protection class design

Ultrasonic sealing system with electronic self-calibration High-end Standard 6 sealing unit Dispenser variably mountable Intuitive user guidance via colored touch panel Electromechanically driven aluminum rollers ensure an optimal product transport Continuously adjustable conveyor speed from 0.2to 1.0m/s Bundle positioning via increments by metrical input of the strapping positions Open design without protective coverings - CE marking inclusive conformity declaration Infeed side guidance Extremely low energy consumption

•Corrosion-resistant ultrasonic sealing system with electronic self-calibration •High-end Standard 6 sealing unit •Wear-free DC drives with integrated electronics •Stepless turnable control panel for many-sided operation •Adjustable strap tension via control panel •Switching from maximum to material-friendly Ecospeed in the control •Quick strap coil change •Automatic strap threading system •Strap end detection with ejection of remaining strap •Automatic strap loop ejection •4 castors, 2 of them lockable (Ø 80 mm) •CE marking inclusive conformity declaration •Potential-free contacts to upstream and downstream machines •Continuously adjustable conveyorspeed from 0-1 m/s •Parameter control panel for setting strapping parameters •Selector switch for pass, single, double or multiple strapping •Machine completely corrosion-resistant (main use of V4A stainless steel) •IP 56 protection class design •Sensitive components (e.g. motors) are equipped with additional covers

• SoniXs Utrasonic sealing unit in standard-6 version • Easy accessibility and tool-free dismantling of strap path components • Stepless turnable operation panel (0° - 180°) for many-sided operation • Adjustable strap tension via potentiometer • Programmable strap tension value • Strap coil changeable from the front and the side • Automatic strap coil change and threading system • Strap end detection with ejection of remaining strap • Automatic strap loop ejection • Extremely low energy consumption • Stand-by mode • 4 castors, 2 of them lockable • CE marking inclusive conformity declaration • Soft strapping selectable for sensitive packages • Easy operation over digital display in the control panel • Potential-free contacts to upstream and downstream machines • Continuously adjustable conveyor speed from 0.1 to 1.0 m/s • Parameter control panel for setting strapping parameters • Selector switch for single, double or multiple strapping

KZV-111 BASIC MODEL - Top-mounted sealing unit - 1 KSR sealing unit and 1 vertical arch - Moveable strap lance for strapping palletized goods - 1-column construction up to 2,000mm - 2-column construction up to 2,000/2,400 mm with pressure Stretch wrapper - Turntable diameter Ø 1,800 or 2,200mm - Max. load for turntable: 3,000 kg weight and pressure - Max. pallet size according to turntable dimensions - Max. wrapping height (incl. pallet): 2,400mm - Optical sensor for pallet height scanning - Soft start and soft stop for turntable frequency controlled - Frequency controlled speed of the turntable - Frequency controlled speed of the lift slide - Turntable stop in starting position - Easy to operate

• SoniXs Ultrasonic sealing unit • Strap dispenser • Potential-free contacts to upstream and downstream machines • Complete electric control for automatic and semiautomatic operation in the operator panel • Siemens PLC control with operator button Options: • Three-part signal light including low strap detection • HL sealing unit with floating head (up to 5,000 N strap tension) • Cable marking • Chassis with flanged rollers • Chassis for conveying height > 800 mm • Manual scantling device (80 x 80 – 100 x 100 mm)

Inline strapping parallel to flute Thermostatically controlled heat-weld sealing Siemens PLC control with touch panel 5-sided electromechanical package alignment Potential-free contacts to upstream and downstream machines Automated setup system resets to the dimensions of the first bundle of the new size (“Teach-In”) Capability to strap up to 90 mm outside the bundle center (adjustment in steps of 10 or 30 mm) allows for perfect strapping of complex bundle sizes and forms Chassis on rails with mechanical locking [MCB-2 XT]: Two movable sealing units

• Inline strapping parallel to flute • SoniXs Ultrasonic needle sealing unit • Automated setup system resets to the dimensions of the first bundle of the new size [Teach-In] • 6-sided electromechanical package alignment • Potential-free contacts to upstream and downstream machines • Siemens PLC control with touch panel • Stand-by-mode reduces wear and energy consumption • Lateral automatic adjustment device • Automatic machine adaptation to package dimensions via adjustable recipes [500] • Sealing unit removing device

• Heat-weld sealing unit in standard-3 version • Wear-free DC drive, brushless motor technology • Strap end detection with ejection of remaining strap • Easy strap coil change and threading system • Soft strapping selectable for sensitive packages • Low-wear, controlled strap path system • Adjustable strap tension via potentiometer • Energy-saving drives • Electronic control • Hinged front table top • Sturdy foot pedal for cycle start • 4 castors of which 2 are lockable • Table top length 600 mm or alternatively 700 mm or 800 mm • CE marking inclusive conformity declaration

PP strapping represents approximately two-thirds of our production. We manufacture it as standard in widths 5-15 millimeters in black. On request, we will be happy to produce it for you in other colors as well. PP strapping material is particularly suitable for strapping packages, cartons or other containers, as well as lighter pallets. After use, it can be easily fed back into the material cycle. It is completely recyclable, has a constantly high quality, can be failure-free processed and is short-term available. Most frequent fields of application are: • General logistics (boxes of corrugated cardboard, styrofoam, plastic) • Printing industry (newspaper, magazines) • Corrugated cardboard industry (folding boxes, cut-outs) • Tins and bottles of plastic, aluminum and cardboard • Construction and container (furniture, wooden slats, tiles and bricks) • Food industry (meat, fish, poultry in folding boxes or styrofoam)

• SoniXs Utrasonic sealing unit in standard-6 version • High availability due to controlled frame • 5-sided electromechanical package alignment • Continuously adjustable conveyor speed • Laterally driven transport belts • Driven top belts • Electro-mechanical package stop and hold-down device • Intuitive user guidance via colored touch panel with ergonomic positioning options • ATR – Automatic cycle rate regulation • Easy maintenance due to automatic removable strapping unit • Automatic machine adaptation to package dimensions via adjustable recipes • CE marking inclusive conformity declaration

• SoniXs Ultrasonic sealing unit in standard-6 version • Strapping applied in transport direction without bundle turning • Easy accessibility and tool-free dismantling of strap path components • Potential-free contacts to upstream and downstream machines • Infinitely adjustable conveyor speed from 0.1 to 1.0 m/s • Optimization of the strapping processes by machine adaptation to defined package dimensions • Energy-efficient, electro-mechanical hold-down device (also available as pneumatic version) • CE marking inclusive conformity declaration • Extremely low energy consumption [Base] • Easy operation over digital display in the control panel [Pro] • Intuitive user guidance via colored touch panel; division into different user groups

• SoniXs Ultrasonic sealing unit in standard-6 version • 4 swivel castors, 2 of them are lockable • Strap end detection with ejection of remaining strap • Easy accessibility and tool-free dismantling of strap path components • Easy operation over digital display in the control panel • CE marking inclusive conformity declaration • Extremely low energy consumption [MC] • Flexible foot pedal for manual strap release • Tool-free dismantling of the table plate [TRC] • Potential-free contacts to upstream and downstream machines • Selector switch for single, double or multiple strapping • Infinitely adjustable conveyor speed from 0.1 to 1.0 m/s • Optimization of the strapping processes by machine adaptation to defined package dimensions • Electromechanically driven aluminium rollers ensure an optimal product transport • Tool-free dismantling of roller system • Pneumatic hold-down device with manual prepositioning • Bundle positioning via time

• SoniXs Ultrasonic sealing unit in standard-6 version • Potential-free contacts to upstream and downstream machines • High sealing tension due to a minimum distance from package to sealing unit • Programmable control with panel inclusive manual control with functional sequence of strapping control • Adjustable strap tension via touch panel • Low-wear, controlled strap path system • Stroke of strap guide frame via belt drive • Strap end detection with ejection of remaining strap • Wear-free DC drive, brushless motor technology • 10 freely configurable programs with up to 10 strapping positions

• Top-mounted SoniXs ultrasonic sealing unit • Automatic height adjustment of pressure plate to bundle height • Easy accessibility • Electrically driven lift plate with geared brake motor • Strap dispenser • Siemens PLC control with touch panel • 2-column design from 2,200 mm passage width Different Models: [KZV-111] • Top-mounted sealing head • One SoniXs- sealing head and one vertical strap guide • Movable strap lance for strapping of palletized goods [KZS-111] Like basic model KZV-111, with laterally moveable turntable [KOV-111] Like basic model KZV-111, with additional underfeed channel for unpalletized goods [KVV-111] Like basic model KZV-111, bottom arch with automatically controlled strap lance or underfeed channel; particularly suitable for strapping of frequently changing package types with or without pallets Options: • Automatic balk feeder with large buffer [KOV] • Angle edge protection for securing sensitive products for transport [KOV]

• SoniXs Ultrasonic sealing unit in standard-7 version • Easy accessibility and tool-free disassembly of strap path components • Potential-free contacts to upstream and downstream machines • Bundle positioning via increments by metrical input of the strapping positions • Flexible product processing through alternatively sealing unit position (central or 140 mm from left) • Infinitely adjustable conveyor speed from 0.1 to 1.0 m/s • Best product processing by possible assignment of package-depending machine settings via product recipes • ATR – Automatic cycle rate regulation • Package including further languages, strapping patterns and positions incl. Multistrap • Intuitive user guidance via Mosca WebHMI. Division into different user groups • CE marking inclusive conformity declaration • Extremely low energy consumption

• Heat-weld sealing unit in standard-3 version • Wear-free DC drive, brushless motor technology • Easy strap coil change and threading system • Soft strapping with open sliding position for sensitive packages • Adjustable strap tension via potentiometer • Energy-saving drives • Electronic controls • Hinged table top made of stainless steel • 4 castors of which 2 are lockable • Strap feed from sealing head level via potentiometer • Quiet sealing unit • Package width min. 80 mm • CE marking inclusive conformity declaration