Electric motors - Import export

2-phase stepper motors Our 2-phase stepper motors are reliable and low-cost drives with a long service life. They are available in different sizes and types of power output, are continuously developed and are thus suitable for a variety of applications. AC servo motors The AC servo motors meet the highest demands regarding dynamics and accuracy and are used if dynamic, exact positioning or smooth running characteristics are required. The different types of power output and sizes cover the most diverse requirements. The benefits at a glance Highly dynamic High efficiency Long service life

Technical information The AI 04 is a stripping machine driven by an electric motor. Exact stripping of different insulated wires up to an outer diameter of 8 mm is possible. Adjustments are very easy to handle with an adjustment knob.

MPW Modular with air-cooled eddy-current brake, particularly for testing smaller electric motors smaller slowly running 1-cylinder engines drive units of e.g. two-wheelers. Essentially, three different types of construction may be distinguished: 1. MPW Modular for combustion engines and electric motors (primarily 1-cylinder combustion engines) 2. MPW Modular for foot-mounted electric motors 3. MPW F for flange-mounted electric motors Special designs, e.g. for foot- as well as flange-mounted electric motors may be offered on request. MPW engine test beds are available in four sizes with different load-carrying capacities (0,5 ... 40 kW).

For driving the FLUX pump a wide range of electrical to pneumatic motors is available. Even if you work in hazardous areas or with flammable liquids. Depending on the application, different pumps can be driven by different motors. Thus, the output of a drum pump depends, among other things, on the power of the motor. Here you will find the most economical and safest drive solution for your application. Battery motor: FBM-B 3100 Commutator motors: FEM 3070 FEM 4070 F 457 F 458 F 460 Ex Compressed-air motors: F 416 Ex FPM

The Motor MD1xL is suitable for viscous, highly flammable, combustible liquids up to 100,000mPas. With the oil-free, 1000 Watt powerful Compressed air motor you can achieve the same flow rate as comparable products with 20% less connection pressure and 4% less air consumption. . Optionally with comfort handle . Explosion-proof Motor according to ATEX guidelines . Oil-free usable Features & Advantages . High performance and high efficiency due to optimised flow guidance . Very good handling due to low weight . Long service life . Very good starting behaviour . High energy efficiency

Muscular and skeletal problems are the most common reasons for people being unable to work, particularly if they have a job that frequently involves physically strenuous activity like pushing and pulling loads. The electric drive systems of the Blickle ErgoMove® series reduce these health risks considerably. The effort required for pulling and pushing is reduced by up to 100 %. The physical strain on the operator is decreased during internal material transport due to the considerably lower amount of effort required compared with manual operation. Equipment and transport units of any kind can be quickly and easily upgraded with a “plug & play” electric drive, steering and braking assistance. The modular sets include two fixed castors with electric drive, cockpit solutions with integrated controls and battery unit as well as all relevant safety features.

Eccentric screw pump tube B70V-SR Industrywith reduction gear for electric motors For pumping highly flammable liquids and for use in "Zone 0", use Pump tubes with mechanical seal (GLRD), cardan shaft (GW) and PTFE stator. The Eccentric screw pump B70V-SR 12.1 (with reduction gear) in the industrial version is suitable for pumping water-like to highly viscous media with and without fibrous or solid materials. Depending on the application, various compressed air and electric motors are available, which you can combine with the Pump tube at any time. This gives you flexibility at all times and saves important resources. * PTO shaft versions also available in special immersion depths of 500 - 2000 mm * Media examples: viscous mineral oils, resins, emulsions, paints and many other thick materials * Uniform volume flow * Easy and fast cleaning * Gentle, low-pulsation product delivery * Low wear * Ideal for mobile use

The eccentric worm-drive pump B70V-SR (with reduction gear) in PURE design is suitable for pumping water-like to highly viscous media with and without fibres or solids. Depending on the application, various electric and compressed air motors are available, which you can combine with the pumping unit at any time. This gives you flexibility at all times and saves important resources. * Also available in special immersion depths * Examples of media: viscous cosmetic products, foodstuffs, etc. * Uniform volume flow * Gentle, low-pulsation product conveyance * Low wear and tear * Ideal for mobile use * Approved in accordance with ATEX Directive 2014/34/EU, category 1/2

Technical information The basic model AI 01 is a stripping machine driven by an electric motor. Exact stripping of different insulated wires up to an outer diameter of 5 mm is possible. Adjustments are very easy to handle. In addition a special funnel to infeed a thin wire is also delivered.

Technical information The AI 02 S3 is a stripping machine driven by an electric motor. Special feature: A special adapted funnel allows to insert two or three wires and strip it in a single step. By turning the stripping blades, the minimal stripping length can be reduced to 3 mm.

Technical information The AI 2,5-20 auto is a stripping machine driven by an electric motor. It uses a system which detects the wire diameter and selects the cutting depth. Exact stripping of different insulated wires within the cross-section range of 0.5 up to 2.5 mm² (AWG20 – 14) is possible without an additional external adjustment. The stripping length and pull-off length are very easy to adjust.

Technical information The AI 04 is a stripping machine driven by an electric motor. Exact stripping of different insulated wires up to an outer diameter of 8 mm is possible. Adjustments are very easy to handle with an adjustment knob. Special: An integrated battery allows up to 7,500 working cycles when fully charged and without external power supply.

The GEMÜ 539 2/2-way globe valve has a hollow shaft actuator and is electrically operated. The eSyDrive hollow shaft actuator can be operated as an OPEN/CLOSE actuator or as an actuator with integrated positioner or process controller. The valve spindle is sealed by a self-adjusting gland packing providing low maintenance and reliable valve spindle sealing even after a long service life. A wiper ring fitted in front of the gland packing protects the seal against contamination and damage. An integral optical and electrical position indicator is standard. — Linear or modified equal-percentage control characteristics — High flow rates — Force and speed are variably adjustable — Extensive diagnostic facilities — Operable via web interface eSy-Web — Integral optical position indicator and LED high visibility display — Standard gland packing suitable for vacuum up to 20 mbar (abs.)

The production of electric motor and generator laminations imposes strict requirements on the press and automation. ANDRITZ Kaiser looks back on decades of experience in the electric motor laminations sector and provides the customer with state-of-the-art solutions. Precise timing and general performance are required for competitive productivity of high speed stamping systems for laminations. Due to the large amount of cutting operations required, a very rigid machine is needed to absorb the cutting impact without damaging any machine part. Finally, the tolerances of 0,02mm in the tools and the end product call for a very precise slide movement, slide guideance and low frame deformation. Our well designed and thoroughly tested concept allows customers to manufacture high-quality products with maximum efficiency. ANDRITZ Kaiser production lines for electric motor laminations are characterized by the following features: Highly stable machine with split-design, cast iron frame for...

nduction Heating and Joining in one turnkey system. This turnkey system is used to heat electric motor housings with various dimensions for a wide range of joining processes. Example Heating System 1: the die-cast aluminium housing for an asynchronous motor (diameter 450 mm) is heated to approx. 290°C in approx. 5 minutes to fit the wound stator package. The parts are loaded and unloaded from the feeding belt parallel to the working time. The heating process takes place in two independent work stations. The generator has a switched output which means that only one generator is required for the two heating stations. The system is controlled using a SIEMENS PLC controller. Example Heating System 2: the aluminium housing (diameter 140 mm) of a synchronous motor is heated to approx. 280°C in approx. 3 minutes to fit the stator. The component is loaded into and unloaded from the heating station semiautomatically. The system is controlled using a PLC.

PSD 43 direct drive is a mechatronic system with integrated control, bus interface and absolute measurement system without battery. This drive is ideal for automatic format changeover. The stepper motor with integrated control and bus communication permits higher velocities at lower torques. The PSD can be easily addressed by rotary switches (not for IO-Link). The instruments can be mounted on a spindle using the hollow shaft without the need for an additional coupling. The optional rotatable attachment housing allows you to attach the direct drives to the machine in any position, no angle plugs are required.

Goodridge Lock wire is an Aircraft grade 321 stainless steel lock wire made to military specifications is perfect for positioning hoses or mounting hardware. Lock wire or safety wire is a type of positive locking device that prevents fasteners from loosening due to vibration as well as other forces. The presence of safety wiring also serves as an indicator that the fasteners have been properly tightened. Lock wire is available in a variety of gauges and materials, depending on the application. In racing applications, stainless steel wire is used, most commonly in 0.032" in (0.81mm) diameter. Typically, the wire is threaded through a hole drilled into a fastener or part, then twisted and anchored onto a second fastener or part, then twisted again

An insulative fibreglass sleeving with a silicone coating designed to protect components in high temperature areas where the heavier fireproof sleeving is not required. It provides superior insulation to components that must maintain stable temperatures to assure performance efficiency. The braided construction allows good flexibility in temperatures as low as -40ºc.

Goodridge braided fire sleeve is engineered for exposure to varying degrees of heat. The thick layer of self-extinguishing silicone polymer shields direct flame exposure, shedding molten metal and glass, whereas the texturized braided fibreglass insulating inner core maintains and stabilises internal temperature whilst minimising surface temperature. Resistant to lubricating oils, fuels, hydraulic fluid, acids, bases and solvents.

To compliment the Goodridge hose, fittings and ancillary range, Goodridge supplies a range of Setrab oil coolers. Used by championship winning race teams world-wide, the track-proven, rugged construction of the Setrab cooler makes it the ideal cooling solution for motorsport and high-performance road use.

SPECIAL ADAPTORS (MODIFIED AN PARTS FOR MOTORSPORT REQUIREMENTS); CARBURETTOR & FUEL ADAPTORS; BANJO ADAPTORS; SPECIAL ADAPTORS; 3 AND 4 WAY CONNECTORS

JIC MALE TO METRIC MALE; BSP MALE TO METRIC MALE; METRIC ADAPTORS

JIC TO JIC - EQUAL THREAD; JIC TO JIC - UNEQUAL THREAD; JIC MALE TO FEMALE REDUCERS AND EXPANDERS; JIC TO NPT MALE TO MALE ADAPTORS; JIC MALE TO METRIC MALE; BSP TO JIC ADAPTORS

To Suit: HL836-04D and HL836-06D Aluminium Hardline Tube