Tool holder - Import export

Static tools form one of the EWS core areas. There is no other manufacturer in the world offering such a variety of products: More than 20,000 different tool holders are available for machine operators. Our portfolio includes VDI tool holders with shaft diameters of 16-80 as well as block tool holders of BMT55-BMT85 to machine-specific holders for MAZAK, Okuma or Mori Seiki, to name just a few. We also offer prism holders according to DIN 69881 (VDI3425 Bl.3) in all nominal sizes. Our standard portfolio includes Capto, HSK, KM and ABS adaptations in addition to the standard holders. Moreover, our scope of supply includes special holding fixtures made according to customer drawings or innovative solutions of the EWS engineers designed to master production engineering challenges. The tool holders are manufactured at our factory in Uhingen and rightly carry the label: Made in Germany! Boring bar holder BMT Capto C4 Double boring bar holder Capto Bar Gripper Infee

Driven tools form a further core area of EWS. More than 8,000 different tools are available at short notice. In addition to standard products like axial and angular heads, EWS offers swivel units, slot broaching tools, multiform tools and multi-spindle machines. There is just no limit. The tool clamping systems range from the classic collet chuck holder to Weldon and hydro extension to Capto, KM, ABS and HSK. The applications range from classic CNC lathes to highly complex turning milling centers. The rapid change system EWS-Varia has set a standard for a flexible modular system. With its safe handling and short change-over times, EWS-Varia ranks among the most successful systems in the market. This was impressively confirmed by the Innovation Award awarded by the German state of Baden-Württemberg in 2006. "Made in Germany" is of course guaranteed by EWS also for these tool systems.

We produce tool holders for rotating/milling centres to individual requirements – also in small series. The design is carried out in accordance with your drawings. Contact I have read and agree to the privacy policy. *Pflichtfelder

Bruns bike holder with self-service card packed in packs of 10

Device holder "Mini" for small tools in the workshop, etc.

Bruns tool holder, broom holder, tool holder for order in the garage, carports, tool sheds, etc.

Bruns tool holder for brooms, hand brushes and other hand-held tools, 5 Bruns device holders on 0.75m guide rail with SB card including screws & dowels VE 10 Carton size 810 x 155 x 280 (L x W x H mm) Weight per box 8.6 kg

7 Bruns device holders 4 Bruns device hooks with 1.0m guide rail including screws & dowels VE10 Carton size 1035x155x280 (L x W x H mm) Weight per box 15.80kg

Bruns tool holder, organization system for forestry equipment, garden tools, tools, etc.4 Bruns device holders 2 Bruns device hooks with 0.5m guide rail including screws & dowels VE 10 Carton size 596x200x315 (L x W x H mm) Weight per box 8.4 kg

Bruns device hooks with self-service card packed in packs of 10

Bruns tool holder, organization system for tool sheds, carports, etc., 2 Bruns device holders 1 Bruns device hook with 0.3m guide rail including screws & dowels VE 10 Carton size 335x155x280 (L x W x H mm) Weight per box 5.20kg

Bruns tool holder, tool holder for home and garden.6 Bruns device holders, 2 Bruns device hooks with 0.75m guide rail including screws & dowels VE 10 Carton size 785x155x280 (L x W x H mm) Weight per box 10.65kg

Bruns tool holder, organization system for garden, carports, workshops, etc., 6 Bruns device holders on a 1.0 m guide rail with SB card including screws & dowels VE 10 Carton size 1050 x 155 x 280 (L x W x H mm) Weight per box 10.62 kg

Static tool holder for machines: NL 1500 NL 2000 NL 2500 NL 3000 NT 4250 NZ 1500 NZ 2000 NT 1000 NT 2000 NTX 1000 NTX 2000 Available in the following versions: Square locking drive radial Turning Tool holder axial Turning Tool holder axial double Boring bar holder Boring bar holder double Infeed Toolholder

Static tool holders for machines: Nakamura SC-250 Nakamura TMC 18 Nakamura TW 10 Nakamura TW 41 Nakamura WT 20 Nakamura WT 150 Nakamura WT 250 Nakamura-Tome Super NTJ Nakamura-Tome Super Nakamura NTX Nakamura SC-300 Nakamura SC-300 L Nakamura SC-300 LM Nakamura SC-300 M Nakamura TW 20 Nakamura WT 300 Nakamura-Tome Super NTX Available in the following versions: Square locking drive radial Turning Tool holder axial Turning Tool holder axial double Boring bar holder

Quick change in confined spaces BENZ Nanofix® is a new quick-change interface that is convincing thanks to its extremely compact design. The outer diameter of 22 mm is designed for minimal spindle distances and is therefore particularly suitable for use in confined spaces.

Cost-effectively process and machine wood, composites and aluminium: We provide series production angle heads for drilling, milling, sawing and grinding in addition to other units for special applications. Benz units are available in a variety of performance classes, making them ideal for everything from light machining to high-performance continuous operation. We have the solution for your special applications: Customized Benz units for machining centers. Put us to the test!

User friendly, stable and very precise. By combining taper concentricity with no backlash with an extremely large planar surface, combined with high torque, BENZ Solidfix® offers a maximum in stability and rigidity, which is even capable of withstanding the demands of milling. The high torque transmission and the highest possible rpms also stress the effectiveness. This is supported by a special clamping mechanism which works centrally, without lateral forces, which in combination with the compact, highly precise components used achieves optimal values for concentricity, rigidity and accuracy in repeatability. Because of its compact design the system is ideal for tools with internal cooling.

Increase of efficiency and machining quality The modular quick change system BENZ CAPTO™ guarantees an extremely compact desgin by being integrated into the spindle. Special clamping kinetics for clamping forces are noticeably below the required range of ISO/DIS 26623-2. BENZ CAPTO™ can be used for milling, drilling and turning, with up to 100 bar coolant pressure. The system is especially suited for heavy duty milling and machining.

Static tool holders for machines: Multiplex 610 (12 tool mounts turret), 615, 620, 6200 (12 tool mounts turret), 6200 Y, Multiplex3 8200 Y, 610 (16 tool mounts turret), 6100, 6100 Y, 6200 (16 tool mounts turret), 630, 6300, Super Quick Turn 10 (16 tool mounts turret) Quick Turn Nexus 200 M / MS / MSY (12 tool mounts turret), 250 M / MS / MSY (12 tool mounts turret) Super Quick Turn 15 M, 18 M, 200 M (12 tool mounts turret), 250 MY (12 tool mounts turret) Quick Turn Nexus 100 M/MS/MSY Quick Turn Nexus 200 M/MS/MSY (16 tool mounts turret) Quick Turn Nexus 250 M/MS/MSY (16 tool mounts turret) Quick Turn Nexus 300 / M / MY, 350 / M / MY, 400, 400 / M Super Quick Turn 28, 30, 300 M / MY, 350 M, 10 M/MS, 100 M, 10 M/MS, 100 M, 200 M (16 tool mounts turret), 250 M (16 tool mounts turret) Available in the following versions: Square locking drive radial Turning Tool holder axial Boring bar holder with IC

Mount tools safely and in the correct position while remaining flexible, all this is possible with the UMB100 mounting unit. The tool clamping units can be changed quickly, making the system an ideal mounting aid for multi-tasking machines. It only takes a few seconds to replace an adapter. The unit with snap-in swivel can be pivoted 4 x 90° at the touch of a button so that even angled holders can always be mounted in the ideal position. Universal mounting block UMB100 Tool holder for VDI holding fixtures Tool holder for Varia VX Tool holder for steep-angle taper holding fixtures

The new EWS tcJet range Optimal chip transport thanks to EWS tcJet EWS tcJet transports the coolant through the inset directly to the cutter and guarantees optimal chip transport... At the same time, the cutting edges have a significantly longer service life. EWS's interior cooling version is available for normal and high-pressure applications for various tool holder fixtures and cutting insert manufacturers.

Trifix® is the new adjusting system for Gildemeister multi tasking machines. The double sided adjusting system is guided by a very precise key way at the surface of the turret. 

 The plates are preloaded, and the resiliency in the adjusting system eliminates static redundancy. This allow the exact position of the tool to be secured and significantly reduces the setup time of the machine. Because this is a highly sophisticated precision instrument it is not possible to use double serrated tool shafts. The tool is supplied fully adjusted and can be used right away. EWS is the DMG system partner for this tool generation. Trifix® advantages: Repeat accuracy below 6 µm at radius of 200 mm High positioning accuracy from one station to another (0.01 mm) Driven tools and static tool holders are completely aligned Static tool holders can be used together with additional drill pattern for mounting Heavy duty spindle noses can be used together with additional d

EWS.PSC offers maximum stability and rigidity coupled with maximum flexibility. Significantly reduce your setup and changeover times while maintaining high mold flexibility. he EWS.PSC program includes a wide range of standard tools with PSC shank for milling spindles as well as tool systems with PSC spindle for lathes. Furthermore, tool holders with plate seat are available. The interface allows you to reduce the time spent measuring, setting up and changing tools. In addition, improved machine utilization can be achieved.

Gear hobbing on CNC lathes without B-axis Years ago, EWS was the first tool manufacturer to offer gear hobbing heads in its standard range, and has continued to develop the holders for gearing technology ever since then. With this technology, it became possible for the first time to produce external gearing on machines without a Y/B-axis. In contrast to a standard milling wheel holder, the tool head of the EWS modular cutter can be swivelled about the axis of the shank. This offers users the advantage of substituting a B-axis with a comparatively small investment. In the meantime, module 3 has become commonplace on VDI40/BMT65/BMT75 machines. The tool heads have become more stable at the same time as being more user-friendly. The alignment system using a sinusoidal profile has come into widespread use and saves considerable alignment and setup times. Operating instructions, flyers and press reports can be found in our download portal Video: Gear hobbing on the

Machine type holders, also called type holders, are flexible tools for labelling with figures or letter combinations, batch numbers, production data as well as manufacturer logos. The size of the type holder depends on the surface provided and the labelling required. The machine type holders can also be designed on several lines. As a rule, the clamping is carried out with lateral tensioning screws, but T types and L types are also used. We make this product according to your wishes.

Protective caps for polygonal taper shank tool holders according to ISO 26623-1 Delicate polygonal taper shank tool holders are protected against dirt and damage during transportation and storage Incorporated latches prevent unintentional release from the shank Impact and crack resistant Polyethylene

Hexagonal telescopic plastic packaging tubes with ratchet length adjustment. Ideal for drills, milling cutters, shank tools, tool holders and tool bits Infinitely variable telescopic length adjustment Speedy efficient packaging Speedy handling

The current series TSA, TSI, TSP, TSAV,of the external-driven GMN tool spindles follow the first grinding spindles made by GMN in the 1930s. Then and today, we provide simple, but robust and functional spindles that reliably fulfill their tasks. Depending upon the customer’s tool selection, spindles are available with various tool holders.