Heat-sealing machines for packing - Import export

Thermosealing jaw type MS... for hermetic sealing of bags made of aluminium, PP or with cardboard tab. Width of the seal 10 mm ribbed.

Continuous sealers type SCV and SCH, to seal bags made of PE, PP, soft PVC, polyamide paper, aluminium or cardboard tabs as they pass through the sealer. - Adjustable speed from 0 to 12 m/minute - Temperature adjustable from 0°C to 400°C. - Width of the weld: 10 mm - Maximum weight on conveyor belt: 10 kg - Optional: bag counter - hot stamping on the weld seam

Electromagnetic sealing jaw type MS...IP for welding and sealing bags: - From PE - From PP - From soft PVC or polyamide Features: This sealing jaw has: - Adjustable welding time - Adjustable cooling time - Adjustable cycle time The jaw is controlled by an electric foot pedal.

Sealing Pliers designed for welding packaging of all sizes in the barrier material (polypropylene laminated paper and aluminum). Thanks to its small size and limited weight can be used anywhere. The pliers dual hot bar solder is available with a width mm. 300 and mm. 400 , furthermore the welds are repeatable side by side at any length. The temperature of the sealing bars is adjustable from 0 °C to 200 °C using a temperature controller positioned on the plier. Thanks to the coated bars with antiadhesive teflon, it is also possible to weld polyethylene bags of high thickness. (Min 100 my each side - my 250 max each side)

TECHNICAL DATA. Mashine dimensions:1150x4995x182 h mm Capacity: 360-720 cycle/hour Cycle: 6-8 cycle/minute Container measurements: 187x137x80 h (8 part) Product capacity:1440 packages/hour Pump capacity: 200 m3 Voltage: 45A-400c 50 Hz kW: 7 kW Pneumatic feeding: 16 NI/6-8 bar Outer body: Stainless steel AISI304 Max Roll Width: 720 mm Warranty: 3 years Certificate: CE

The automatic machine for packing washing powders in packages with fingers handle made of polyethylene tape is equipped with a double-flow weighing dozer and independently forms a 3-seam package of polyethylene tape and pour in it ready dose of washing powder, the package is sealed, cut off and step-by-step conveyed by the receiving transporter. The machine is equipped with a high-quality control system, which consists of the best components from Europe and is based on PLC Siemens. The machine is controlled using a touch-screen installed on the front of the control panel. From this display, you can monitor and configure the operation of the machine. All the parameters (like dose mass, dosing mode etc) are set at one terminal.

Device components and operation principle The automatic machine for packing pellets in packages of polyethylene tape is equipped with a double-flow weighing dozer and independently forms a 3-seam package of polyethylene tape and pour in it ready dose of pellets, the package is sealed, cut off and step-by-step conveyed by the receiving transporter. The machine is equipped with a high-quality control system, which consists of the best components from Europe and is based on PLC Siemens. The machine is controlled using a touch-screen installed on the front of the control panel. From this display, you can monitor and configure the operation of the machine. All the parameters (like dose mass, dosing mode etc) are set at one terminal.

ME-CFE CONSTANT AUTO SEALERS WITH MOTOR CONTROL Table top motorized sealer with electric pedal and welding bars at a constant temperature for sealing polypropylene bags and paired/laminated aluminium, paper, barrier materials, etc. The sealing bars of the type "hot bar" are equipped with resistance and thermostat for controlling the temperature from 30 ° C to 250 ° C. The closure of the bars it takes place through an engine which guarantees a high welding pressure (0,7 Kg./cm2) and allows the sealing of envelopes with hight tickness with or without side bellows. Operation The operation provides for the closure of bars and seals the bag following operator control, by electric pedal. This allows the operator to grab the bag with both hands, being able to perform a more precise sealing and parallel to the bag.

New packaging machine with transparent bell RP series with solid steel structure, the latest generation of electronic, front control interface, intuitive programming, more space in the packaging space and a whole host of technical features that enhance performance yet. Three models are available with a support surface of mm. 400x250x200h - mm. 520x390x250h - mm. 580x780x250h. The dimensions of the support surface are to be considered with the hood closed. The volume cannot be completely filled by the box or by the product to be packaged as space must always be left for the passage of hot air around the product.

This special automatic table top/vertical with stand constant heat sealer. Are suitable for sealing polypropylene and paired / laminated bags, paper, barrier materials, etc. The sealing jaws of the type "hot bar" are equipped with resistance and thermoregulator for controlling the temperature from 30 ° C to 200 ° C. The closing of the jaws is through an electromagnet which ensures a high sealing pressure and allows the sealing of thick bags with or without side gussets. Operation The operation provides for the closure of bars and seals the bag following operator control, by electric pedal. This allows the operator to grab the bag with both hands, being able to perform a more precise sealing and parallel to the bag. The vertical model with pedestal can be tilted to 90 degrees, has a special support surface to support the bag during sealing. In this way the operator has both hands free to hold the bag since the sealing is made by pressing the pedal.

TABLE MONOBLOC SEALER WITH MANUALLY OPERATED SEALING BAR AN INCORPORATED ROLL HOLDER The SP 600 is equipped with sealing bar with NI-CR wire for simultaneous cutting and welding of the film. Allows to obtain a polyethylene or polypropylene bag, perfectly welded and trimmed, using the normal fold film. Suitable for use in laundries, shirt factories, the textile sector in general, but is also suitable for the food sector for the packaging of the bread. Operation: Place the coil with the open side facing the operator Insert the open-film blade between the two flaps Unroll the film to the desired length Lower the sealing bar and cut the bag Enter the product in the bag and make the welding of the side remained open.