Hydraulic compensator - Import export

The preferred field of application for the (gas) hydraulic industrial buffer (COMPENSER®) of the S-series is in the medium to heavy engineering industry sector. As a heavy duty shock absorber it is used in large crane systems (e.g. harbour crane, shipyard crane or container crane), metallurgical plants, rolling mills, loading systems or as end stop integrated in a rail buffer stop. Design & Function: The gas-filled inner tube 2 enters the outer tube 9. The damping medium flows from the pressure chamber 6 through the throttle orifices 8 of the metering tube 7 into the volume balance chamber 5. The separating piston 4 simultaneously moves in the direction of the impact cap 1 and compresses the nitrogen gas filling. In the gas space 3, the energy is stored which is required for the reset of the inner tube. When the inner tube 2 returns to the initial position, the separating piston 4 moves in the opposite direction and presses the damping medium back into the pressure chamber 6.

The hydraulic industrial shock absorber of the C-series (COMPENSER®) is the ideal hydraulic buffer for storage and retrieval machines or smaller conveyor systems, crane systems, test stands etc. in light to medium mechanical engineering. Due to its short design, this hydraulic buffer (COMPENSER®) can be used in a spacesaving manner as limitation of the end position (as emergency end stop) in industrial applications. In addition, the low reset force allow operational pushin cycles at creep speed. Design & Function: The piston rod 2 enters the metering tube 3. The damping medium flows from the pressure chamber 6 through the throttle orifices 4 of the metering tube 3 into the volume balance chamber 5. The nitrogen gas between the outer tube 7 and the metering tube 3 is compressed and stores the energy required for the reset of the piston rod. When the piston rod 2 returns to the initial position, the damping medium flows back into the pressure chamber 6.

Pre-mixed screed, 3 mm grit, damp earth type, fibre-reinforced with stainless amorphous metallic fibres, with high thermal conductivity, based on hydraulic binders, compensated shrinkage with rapid drying and controlled curing, ideal for Realization by hand or machine, also pressure pump, of background screed to be applied directly on any internal surface as long as it is stable and not subject to capillary ascent. Package: Bulk in silo-25 kg sacks-70 sacks-17.50 QL footboards RH Drying < 2%: 4 days Usage: Internal Color: Grey Particle size: ≤ 3 mm Yield: 18/20 kg/mq per cm thickness depending on the degree of comping Thermal conductivity EN 13813: λ = 2.03 W/MK Minimum application thickness Anchored screed cm 3 Float Screed cm 4 Screed on floor heating cm 3 above the ashlar Float screed on insulating mats > 6 mm cm 5 Compression resistance at 28 days EN 23892-2: ≥ 20 N/mm ² (C20)