Industrial heating systems - Import export

TEPLOPANEL climate system is based on principle of thermal infrared radiation. Infrared waves, without air heating, turn into heat while contacting with the surface of objects and people. Thus, the heated objects emit heat secondary and give it to the air by means of convection. The heat carrier in the radiant panels is classical preheated water. Thus, the water radiant panel is the best and the most effective energy saving infrared appliance, as it operates with water of up to 95°С. Water heating source operates on any type of fuel: gas, electricity, wood, pellets, waste oil, central heat supply. TEPLOPANEL system provides fast room heating, has low lag effect in comparison with any convective systems. Low temperature of heat distribution creates uniform temperature in the room and allows to use infrared heaters in fire-hazardous objects. It enables to save up to 52% expenses of the energy carrier compared to air heating appliances. The higher the room the more savings you achieve.

TEPLOPANEL climate system is based on principle of thermal infrared radiation. Infrared waves, without air heating, turn into heat while contacting with the surface of objects and people. Thus, the heated objects emit heat secondary and give it to the air by means of convection. The heat carrier in the radiant panels is classical preheated water. Thus, the water radiant panel is the best and the most effective energy saving infrared appliance, as it operates with water of up to 95°С. Water heating source operates on any type of fuel: gas, electricity, wood, pellets, waste oil, central heat supply. TEPLOPANEL system provides fast room heating, has low lag effect in comparison with any convective systems. Low temperature of heat distribution creates uniform temperature in the room and allows to use infrared heaters in fire-hazardous objects. It enables to save up to 52% expenses of the energy carrier compared to air heating appliances. The higher the room the more savings you achieve.

Schultze RiRo heaters are your solution for industrial and commercial heating appliances: dust- and watertight, corrosion-resistant, flexible and uncomplicated to install. Suitable for damp locations and rough industry environment, for reliable and efficient heating – often unnoticed, but indispensable. The construction of RiRo-nta is identical with RiRo-nt except for the fact that heating power can be steplessly regulated by our built-in thermostat. It keeps the temperature of your choice constant between +5°C and + 30°C or just protects your room from frost. The red signalling light shows when power is on.

The induction generator module is designed to supply up to 6 induction coils (inductors) with a power of up to 3 kW each. The device operates on the three-phase mains with a voltage of up to 400 V and a frequency of 50/60 Hz. The mains current is rectified and fed to the DC link, from which the inductors are individually supplied. The output power is controlled via the Kendrion controller of the modular industrial heating system. The setting range from 0% to 100% can be selected individually for each channel. By using state-of-the-art semiconductor switches, the output stages achieve high efficiencies, at working frequencies up to 25 kHz.

Explosion protected high performance cartridge heaters for heating of liquids (oil and others), solid bodies or gas Plastics industry: hot runner systems, extruder heating Heating of metal pieces, such as moulds or tools. Heating of valves, nozzles or other parts of machinery Analysis technology Lube oil heaters for small machines.

By offering alternative solutions to fossil fuel systems, Aldea offers solutions suitable for every need, with the aim of making these solutions both economical for the consumer and harmless in terms of the environment and carbon emissions in the long term. You can click on the link below to make a difference in the solutions you offer to your customers in your region and to provide services with new generation technologies.

Aldea ALD100 SET wireless room thermostat is the component that is extremely easy to install and use and maximizes energy efficiency in a heating system. Connect the receiver to your existing combi boiler, heat pump, etc. After connecting it to your device, you can start using it directly by placing the transmitter either on the stand or on the wall hanger in your environment. The product controls whether your heating device will be activated or not, depending on the ambient temperature you are in and the temperature value you specify. When the temperature drops 0.5 °C below the level you set, the thermostat activates and enables your device to work, and when the ambient temperature reaches 0.5 °C above the value you set, it stops your device from working.

Aldea ALD100 room thermostat is the component that is extremely easy to install and use and maximizes energy efficiency in a heating system. Existing boiler, heat pump etc. After connecting your ALD100 room thermostat to your device by pulling a cable from your device to the area where you want to position the room thermostat, you can start using it directly by mounting the wall hanger on the wall. ALD100 room thermostat controls whether your heating device will be activated or not, depending on the ambient temperature you are in and the temperature value you specify. When the temperature drops 0.5 °C below the level you set, the thermostat activates and enables your device to work, and when the ambient temperature reaches 0.5 °C above the value you set, it stops your device from working.

Aldea BLT 8-3 DN40 vertical shaft booster, stainless steel, multistage centrifugal pump, has features such as high efficiency, low noise, stable operation. The pump set adopts vertical multi-stage structure without self-priming, which makes the product compact, easy to install, use and maintain. High-efficiency standard motor, Japanese NSK bearings and cold-rolled 50ww800 silicon steel sheet make the pump high-efficiency, low-noise and maintenance-free. Fully enclosed shaft seal, IP55 protection class, F class insulation class, special “double lock” drive end bearing enable the pump to withstand higher inlet pressure.

Aldea BLT 8-14 DN40 vertical shaft booster, stainless steel, multistage centrifugal pump, has features such as high efficiency, low noise, stable operation. The pump set adopts vertical multi-stage structure without self-priming, which makes the product compact, easy to install, use and maintain. High-efficiency standard motor, Japanese NSK bearings and cold-rolled 50ww800 silicon steel sheet make the pump high-efficiency, low-noise and maintenance-free. Fully enclosed shaft seal, IP55 protection class, F class insulation class, special “double lock” drive end bearing enable the pump to withstand higher inlet pressure.

Aldea BLT 4-22 DN32 vertical shaft booster, stainless steel, multistage centrifugal pump, has features such as high efficiency, low noise, stable operation. The pump set adopts vertical multi-stage structure without self-priming, which makes the product compact, easy to install, use and maintain. High-efficiency standard motor, Japanese NSK bearings and cold-rolled 50ww800 silicon steel sheet make the pump high-efficiency, low-noise and maintenance-free. Fully enclosed shaft seal, IP55 protection class, F class insulation class, special “double lock” drive end bearing enable the pump to withstand higher inlet pressure.

Aldea BLT 4-19 DN32 vertical shaft booster, stainless steel, multistage centrifugal pump, has features such as high efficiency, low noise, stable operation. The pump set adopts vertical multi-stage structure without self-priming, which makes the product compact, easy to install, use and maintain. High-efficiency standard motor, Japanese NSK bearings and cold-rolled 50ww800 silicon steel sheet make the pump high-efficiency, low-noise and maintenance-free. Fully enclosed shaft seal, IP55 protection class, F class insulation class, special “double lock” drive end bearing enable the pump to withstand higher inlet pressure.

Aldea BLT 4-16 DN32 vertical shaft booster, stainless steel, multistage centrifugal pump, has features such as high efficiency, low noise, stable operation. The pump set adopts vertical multi-stage structure without self-priming, which makes the product compact, easy to install, use and maintain. High-efficiency standard motor, Japanese NSK bearings and cold-rolled 50ww800 silicon steel sheet make the pump high-efficiency, low-noise and maintenance-free. Fully enclosed shaft seal, IP55 protection class, F class insulation class, special “double lock” drive end bearing enable the pump to withstand higher inlet pressure.

Aldea BLT 4-12 DN32 vertical shaft booster, stainless steel, multistage centrifugal pump, has features such as high efficiency, low noise, stable operation. The pump set adopts vertical multi-stage structure without self-priming, which makes the product compact, easy to install, use and maintain. High-efficiency standard motor, Japanese NSK bearings and cold-rolled 50ww800 silicon steel sheet make the pump high-efficiency, low-noise and maintenance-free. Fully enclosed shaft seal, IP55 protection class, F class insulation class, special “double lock” drive end bearing enable the pump to withstand higher inlet pressure.

Aldea BLT 2-18 DN25 vertical shaft booster, stainless steel, multistage centrifugal pump, has features such as high efficiency, low noise, stable operation. The pump set adopts vertical multi-stage structure without self-priming, which makes the product compact, easy to install, use and maintain. High-efficiency standard motor, Japanese NSK bearings and cold-rolled 50ww800 silicon steel sheet make the pump high-efficiency, low-noise and maintenance-free. Fully enclosed shaft seal, IP55 protection class, F class insulation class, special “double lock” drive end bearing enable the pump to withstand higher inlet pressure.

Aldea BLT series vertical shaft booster, stainless steel, multistage centrifugal pump, has features such as high efficiency, low noise, stable operation. The pump set adopts vertical multi-stage structure without self-priming, which makes the product compact, easy to install, use and maintain. High-efficiency standard motor, Japanese NSK bearings and cold-rolled 50ww800 silicon steel sheet make the pump high-efficiency, low-noise and maintenance-free. Fully enclosed shaft seal, IP55 protection class, F class insulation class, special “double lock” drive end bearing enable the pump to withstand higher inlet pressure.

Aldea BLT series vertical shaft booster, stainless steel, multistage centrifugal pump, has features such as high efficiency, low noise, stable operation. The pump set adopts vertical multi-stage structure without self-priming, which makes the product compact, easy to install, use and maintain. High-efficiency standard motor, Japanese NSK bearings and cold-rolled 50ww800 silicon steel sheet make the pump high-efficiency, low-noise and maintenance-free. Fully enclosed shaft seal, IP55 protection class, F class insulation class, special “double lock” drive end bearing enable the pump to withstand higher inlet pressure.

Aldea pipe holder hook is one of the necessary components for fixing pipes in underfloor heating installations.

Aldea pipe connection fitting is one of the necessary components for pipe connections in heating installations. Gland quality is very important for the life of the installation. It is inevitable to experience problems in a short time in installations made using poor quality fittings. For this reason, while looking for affordable prices even for the smallest component, high quality should not be compromised.

Aldea female return fitting is one of the components required to provide pipe connections in heating installations. Gland quality is very important for the life of the installation. It is inevitable to experience problems in a short time in installations made using poor quality fittings. For this reason, while looking for affordable prices even for the smallest component, high quality should not be compromised.

Aldea male return fitting is one of the components required to provide pipe connections in heating installations. Gland quality is very important for the life of the installation. It is inevitable to experience problems in a short time in installations made using poor quality fittings. For this reason, while looking for affordable prices even for the smallest component, high quality should not be compromised.

Aldea automatic air vent is used to automatically evacuate air that may occur in heating and ventilation systems. In this way, noise that may occur in your heating system, damage that may occur in the circulation pump, corrosion of other components in the system and regional thermal imbalance that may occur at the installation end points are prevented.

Aldea PEX corner radiator valve ensures that temperature control in radiator installations is completely in your hands.

Aldea metal collector clamp is necessary for the proper and solid assembly of your collectors in underfloor heating installations.

Aldea union collector valve ensures that temperature control in underfloor heating installations is completely in your hands.

Aldea corner radiator valve ensures that temperature control in radiator installations is completely in your hands.

Aldea mini valve collector is the component through which the management of an underfloor heating installation takes place. The underfloor heating pipes coming from the rooms are connected to these collectors, and the hot water from the heating source is distributed homogeneously to the rooms through this component, giving you full control over your underfloor heating installation.

Aldea self-valving collector is the component through which the management of an underfloor heating installation takes place. The underfloor heating pipes coming from the rooms are connected to these collectors, and the hot water from the heating source is distributed homogeneously to the rooms through this component, giving you full control over your underfloor heating installation.

Floor heating styrofoam is a must-have component in a floor heating installation. Thanks to its features, it not only provides thermal insulation under the floor of the house or building where heating is desired, but also serves as a main frame that ensures the proper and proper installation of underfloor heating pipes. Since Styrofoam will be laid under the floor and covered, choosing high-quality products is the most important factor for years of trouble-free use. Aldea underfloor heating styrofoam is made of high quality material and will perform its heating function without any problems for many years when applied according to the rules. Styrofoam is produced in different densities to meet different needs, depending on factors such as the insulation status of the area to be used, ground structure, and external temperature measurements.