Injection presses - Import export

This press is intended for rubber overmolding of cables used for stone cutting. The cables must be positioned in the mould in the stretched position, and over moulding takes place successively in the jog mode. The “CFrame” design with a closing force of 1,000 kN has been tailored to these presses, because this technology gives access to all sides of the mold, what is essential for the successful finalization of this very special overmolding.

Economic injection molding presses. A REP injection unit combined with a closing unit of a Tung Yu press. This combined technology offers openended options Separate extrusion and injection thanks to the "Y" type injection unit. 2 or 3stroke closing unit. Proportional closedloop temperature control. Optimized floor space and ergonomics thanks to its modular design.

The Microject is a micromachine of a clamping force of 60 tons designed for the injection molding and overmolding of inserts used in small parts. Usability and flexibility. Plug and Produce! Characteristics MICROJECT LSR Maximum injection volume 3.77 (at 2000 bar) or 6.94 (at 1500 bar) or 10.37 (at 1000 bar). Clamping force 60 kN. Mould dimensions 150 x 100 mm. Overall dimensions 1.2 x 0.75 m. Simplicity and flexibility Installation in 30 minutes. Mould setting time optimally reduced. Intuitive touch screen interface.

URP Joint venture United Rubber Machinery Strategic Alliance for Asian injection molding machine market between REP and LWB Steinl,

Machine features Clamping force 1,950 kN. Size of the platens 450 x 450 mm. Injection volume 1,000 cm³. The H49 is designed for Automated production. Injection molding (more or less simple parts). Low floor space and height requirement. An optimized cycle time. etc

Machine features Clamping force 4,000 kN. Platen size 750 x 800 x 80 mm. Injection volume 2,000 cm³ or 5,000 cm³. The H610 allows Automated productions. Injection molding (more or less simple parts). A small footprint and height. An optimized cycle time. etc.

Type V410 Core 1,600kN G10 is the 10th generation of REP injection molding presses with two versions available, on the one hand the Lean range G10 Core and on the other hand the Performance range G10 Extended. The G10 Core is a machine line, which has been matched for less demanding processes. It features all major costoptimized functionalities and the expertise of REP.

Type V510 Extended 3,050kN Machine features Clamping force 3,050 kN. Size of the platens 500 x 630 mm (630 x 630 mm optional). Injection volume 1,000 or 2,000 cm³. The G10 Extended range, performance for complex processes. Designed to better meet the various customer requirements with its embedded intelligent solutions.

Type V710 Extended 5,100kN Machine features Clamping force 5,100 kN. Size of the platens 630 x 800 mm (800 x 800 mm optional). Injection volume 2,000; 5 000; 8,500 or 11,000 cm³. The G10 Extended range, performance for complex processes. Designed to better meet the various customer requirements with its embedded intelligent solutions.

Machine features Closing force 3,200 kN. Size of the platens 1,250 x 630 mm. Injection volume 1,000 cm³. Machine developed for largeseries injection molding involving parts with inserts, such as for example the injection molding of housing seals.

Type V510 Core 3,050kN G10 is the 10th generation of REP injection molding presses with two versions available, on the one hand the Lean range G10 Core and on the other hand the Performance range G10 Extended. The G10 Core is a machine line, which has been matched for less demanding processes. It features all major costoptimized functionalities and the expertise of REP.

Electric horizontal machine, ultra compact for an optimized productivity! Suitable for the injection of many elastomers (rubber, silicones, etc.) Compact & ergonomic 33% smaller footprint compared to other presses on the market All features and production capacity in less than 4 meters length Productive & electric powered performance Productivity +20% 60% reduction in injection time 30% decrease in cure time Sustainable & Ecofriendly 50% power consumption 100% Water consumption 14% Waste reduction Oil free The “SmartWire” technology allows production to become autonomous and connected.

In short, large flat gasket REP machines mean Clamping quality Thick traverses, multiple synchronized clamping operations; Injection of long thin sections Injection pressure up to 3,000 bar and circuit division with several injection units; Productivity Very fast 3step clamping, doubleplate kits; Ergonomics/access to the mold Widthwise heating plates, demolding kit or sliding platen. These types of machines have been developed for largeseries injection molding involving parts with inserts, for example the injection molding of battery pack seals. Based on its longstanding experience in this field, REP offers a comprehensive range of machines with largesized heating plates and adjustable configurations to fully comply with the technical specifications of each application and all client’s needs.

THP range machines are particularly appropriate for the molding of oil seals, backup rings, parts for the automotive industry and many other rubber parts. There are two series, 2RT or 3RT, depending on the number of mold platens. Of simple design for easy maintenance, they can be provided as single or double station machine. Their vacuum cover design allows for reduced curing time and therefore increased profitability. The top platen, which is inclined by 60°, is suitable for different demolding options.

REP designs and manufactures injection moulding presses optimized for special applications, with one of them being the molding of bladders (open or closed) for the production of tyres. Clamping force from 8,000 to 22,000 kN. https//www.youtube.com/watch?v=7EOOJ7wB_us

Machine features Clamping force 2,544 kN (station A) / 2 x 785 kN (station B & C). Size of the platens 630 x 500 mm. Injection volume 1,000 cm³; 2,000 cm³ or 5,000 cm³. The CMX (CompactMultiStation Generation X G10) is a 4station injection molding press 1 injection station (A), 2 curing stations (B and C), 1 demolding station (D). The CMX machine is available with two clamping forces 1,540 kN (CMX1) or 2,544 kN (CMX2).

We offer a range of moulded parts – Orings, Seals, Washers, Gaskets, Mountings, Grommets, Vibration Isolators, etc, in a range of materials including, EPDM, PVC/NBR Chloroprene, Polyacrylic, Vamac, NBR, HNBR, XNBR, Hypalon, Fluorosilicone, Silicone and FKM. Transfer, Injection and Compression Moulding Presses Available Standard Size available off the shelf with our global

Type V710 Core 5,100kN G10 is the 10th generation of REP injection molding presses with two versions available, on the one hand the Lean range G10 Core and on the other hand the Performance range G10 Extended. The G10 Core is a machine line, which has been matched for less demanding processes. It features all major costoptimized functionalities and the expertise of REP.

NOVOPLAST – plasticized PVC The title NOVOPLAST ® indicates plasticized PVC granulates. It is a mixture of various additives combined suitably according to its further use. The most important additives to plasticized mixtures may in addition to PVC and plasticizers include thermal stabilisers, lubricants, separation agents, filling agents, pigments, flame retardants, light stabilisers, antioxidants, various modifiers, etc. The content of plasticizer in the mixture is determined by final hardness of the mixture. Hardness of resulting mixtures ranges from 45 degrees on the Shore A scale to the hardest Novoplast – 60 degrees on the Shore D scale. Novoplast granulates are processed subsequently using mainly extrusion, injection moulding, and mould pressing technologies. Final products manufactured from plasticized NOVOPLAST® granulates are various types of hoses, hoses with special resistance against gasoline, diesel, oil, frost, etc., technical mouldings, floor covers, outsoles,...

Our Company produces 100 mm coffee stirrers and 110 mm cappuccino stirrers, bulk packaged in bags. The materials used (food-grade and compliant with the MOCA regulation concerning Food Contact Materials) are: PS or PLA, in white or coloured version (food-grade pigments compliant with the MOCA regulation concerning Food Contact Materials). Each of the packaged bags are electrically welded: total absence of glue. The machines and equipment used for the production of highly innovative stirrers (moulds treated to avoid the use of lubricants and without plastic waste; electrical injection presses without hydraulic oil and with low energy consumption) together with highly qualified personnel for accurate control of production, ensure high standards of quality, safety and hygiene of products in compliance with current industry legislation.

In its production Hemogum uses elastomere injection presses, transfer or injection procedure presses.Each press uses the “intelinjekt" system which integrates the termotrac and mastertrac automatition systems. "Intelinject' injection controlling system and closet) loop control provides the precision and repetition in regulation of presses, ntegrates the mastBftrakt and termotrakt software. Constant control of all pioduction parameters of parts guarantees tneir compliance win me required nemi.

Adhesive-free equipment Bonding with the substrate component is carried out without adhesive. These processes are particularly useful for back-injected or back-pressed components, where the decorative material needs to cover component edges.

Historic range developed by Servi Doryl to manufacture pressed cheeses. The injected moulds and lids are designed in copolymer polypropylene with a fine square pattern and conical perforations. Different sizes are kept in stock : round and rectangular models.

Ozkoc started business with mass production of first plastic injection presses in Turkey. In the 1970s, by shifting his knowledge and experience on thermoplastic materials to thermoset materials, Ozkoc started to produce melamine presses. With the experience of this field Ozkoc started produce presses for rubber, bakalite, linings and similar resin based thermosets. Same presses also could be used for different materials thanks to the flexible automation.

Ozkoc started business with mass production of first plastic injection presses in Turkey. In the 1970s, by shifting his knowledge and experience on thermoplastic materials to thermoset materials, Ozkoc started to produce melamine presses. With the experience of this field Ozkoc started produce presses for rubber, bakalite, linings and similar resin based thermosets. Same presses also could be used for different materials thanks to the flexible automation.

2 Component Fiber Sealing System impregnated with Graphite and MoS2 lubricant Pressure Capability is dependent on design of endrings. Characteristics Simple installation Use without barrier fluid Maintenance free Shaft protecting No adjusting of gland Re-pressurize in operation Operating range Velocity [v max]: 12 m/s Temperature: t = -40… +315 °C pH: 2 - 12 Density: 1.10 g/cm³ Pressure Capability is dependent on design of endrings. Main application Equipment which is badly accessible Worn shaft sleeves Non centric running shafts Suitable for Higher Temperature applications Accessories Special endrings made of HPU and PTFE/Graphite compound for non centric running shafts Form of delivery Unit for H- and P-Type: Cans 1 kg, hobbock of 25 Kg 2 Component System Component H: Is used for the basic manual fill of the stuffing box. Component P: Is used for Injection with press DVS TP 9000.

2 Component Fiber sealing system impregnated with PTFE and special lubricant Pressure Capability is dependent on design of endrings. Characteristics Simple installation Use without barrier fluid Maintenance free Shaft protecting No adjusting of gland Re-pressurize in operation Operating range Velocity [v max]: 8 m/s Temperature: t = -10… +180 °C pH: 2 - 12 Density: 1.10 g/cm³ Pressure Capability is dependent on design of endrings. Main application Equipment which is badly accessible Worn shaft sleeves Non centric running shafts Pulper Suitable for Universal use Accessories HPU Endrings Form of delivery Unit for H- and P-Type: Cans 1 kg, hobbock of 25 Kg 2 Component System Component H: Is used for the basic manual fill of the stuffing box. Component P: Is used for Injection with press DVS TP 9000.

As a rubber moulding company, engineered bespoke rubber mouldings are developed on-site in collaboration with mould designers. The range of injection, compression, and transfer moulding presses on-site enables us to provide clients with various solutions. Rubber, alongside woven fabrics and custom made inserts, are regularly used in mouldings.