It network protection - Import export

NSPV surge protective device DC SPD protect against lightning surge voltages in solar system (photovoltaic power supply system). These units must be installed in parallel on the DC networks to be protected and provide common and different modes protection. Its installed location are recommended at both ends of the DC power supply line (solar panel side and inverter/converter side), especially if the line routing is external and long.High energy MOVs equipped with specific thermal disconnectors and related failure indicators.

PROTECTION OF HYDRAULIC NETWORKS Cast iron strainer MAIN FEATURES Ductile iron body Nominal pressure 16Bars ISO PN10 and PN16 drilled flanges up to DN 150, from DN 200, PN 10 or PN16 drilling to be specified

Protection of hydraulic networks Axial check valve Ductile iron body Nominal pressure 16Bars ISO PN10 and PN16 drilled flanges up to DN 150, from DN 200, PN 10 or PN16 drilling to be specified

GENERAL DEVICES Chip resistors Chip resistor networks ESD protection devices（ESD varistor） AUTOMOTIVE DEVICES IATF16949 Certified　Chip thermistors High mechanical strength using thick film technology, Short lead time supply High reputation in many fields CHIP RESISTOR/CHIP THERMISTOR ARRANGEMENT Chip resistor JAXA Qualification 2007 Chip thermistor JAXA Qualification 2010 Thermistor with lead wire JAXA Qualification 2011 Surface mount type fuse JAXA Qualification 2013 Lead type thermistor JAXA Qualification 2016 Used for electronic equipment installed in satellites, space stations, rockets, transfer vehicles

GENERAL DEVICES Chip resistors Chip resistor networks ESD protection devices（ESD varistor） AUTOMOTIVE DEVICES IATF16949 Certified　Chip thermistors High mechanical strength using thick film technology, Short lead time supply High reputation in many fields CHIP RESISTOR/CHIP THERMISTOR ARRANGEMENT Chip resistor JAXA Qualification 2007 Chip thermistor JAXA Qualification 2010 Thermistor with lead wire JAXA Qualification 2011 Surface mount type fuse JAXA Qualification 2013 Lead type thermistor JAXA Qualification 2016 Used for electronic equipment installed in satellites, space stations, rockets, transfer vehicles

Warning foils Warning (cautionary) foils made from PE (polyethylene) using extrusion technology. They are produced in various colour designs, with single- or double-sided pattern, with micro-perforation or without perforation. They serve as an indication and warning of the existence of cable routes and other conducts embedded in ground excavations, etc. These foils do not provide mechanical protection of such networks. Processed materials LDPE LDPE is a polyethylene with lower density. It is the most frequently used material in the production of foils, in particular for packaging. All simple types of disposable bags, garbage bags, and shopping bags are made just from LDPE. The reason is particularly its low price and easy processing ability. Foils are manufactured by extrusion, either as 2D foils or hoses (tubular extrusion). Foils can be made as very thin (bags for baked goods) or thick-walled (large bags). Package thickness may be adapted to application requirements from 30...

The 3-phase UPS systems offer rack-mounting modularity together with a compact design and an operating ratio of up to 96% in double conversino mode. Output categories from 10 kW to 200 kW per rack are available. Higher outputs available on request. The UPS systems of our partner ABB feature optimum mechanical and electrical integration into the RiMatrix IT modular infrastructure system, and are a key component of an integrated power supply chain in the data centre. They provide reliable protection from network malfunctions and failures.

Thousands of nodding donkey oil pumps were energized through an extensive and highly meshed overhead electrical network. Automated protection was performed only by the feeder CB at the substation. None of the line sectioning breakers were automated, so every single failure on the network required human intervention and led to significant outages. Solution Tavrida Electric installed and commissioned six Rec15 with Rezip* functionality on a single line in just one day. The following project outcomes were achieved Direct savings (outage time reduction → revenue loss reduction) Indirect savings (operation, maintenance, and repair cost reduction) Improvement of power supply quality and reliability Drastically improved network visibility and operator awareness *Rezip is an advanced Fault Detection, Isolation and Restoration (FDIR) algorithm

Safety Bezel for EN-50 Network Isolators, with touch protection and safety locking. Unlocking is only achievable with a tool (e.g. screwdriver). Black plastic.

Product Features: • A range of single phase RC networks rated at 275V, with PCB leads. • The RE Series or RC Networks is very similar to the XE range, but maintains a higher voltage rating of 275V. They hold various safety approvals, are of a compact size and have a good peak pulse withstand capability. • The products are suitable for a range of AC and DC applications including suppression when switching reactive loads, and as a snubber network in SCR and triac protection. • Approvals include: UL, CSA, VDE, SEV, SEMKO, NEMKO, FIMKO, DEMKO and RoHS.

Product Features: • Roxburgh EMC's range of networks are suitable for a variety of applications. RC Networks are available with PCB Mounting (XE) or flying leads (XEB). • The XE Series or RC Networks has PCB mounting and is available with 0.1μF 120Ω and 0.2μF 120Ω. Rated at 250V the RC Networks consist of a capacitor in series with a high quality film resistor. • Applications include suppression when switching reactive loads, and as a snubber network in SCR and triac protection. • Approvals for the XE range include: UL, CSA, VDE, SEV, SEMKO, NEMKO, FIMKO, DEMKO and RoHS.

Product Features: • Roxburgh EMC's range of RC networks are suitable for a variety of applications. RC Networks are available with flying leads (XEB) or PCB mounting (XE). • The XEB series of RC Networks has flying leads and is available with 0.1μF 120Ω and 0.2μF 120Ω. Rated at 250V the RC Networks consists of a capacitor in series with a high quality film resistor. • Applications include suppression when switching reactive loads, and as a snubber network in SCR and triac protection. • Approvals for the XEB range include: UL, CSA, VDE, SEV, SEMKO, NEMKO, FIMKO, DEMKO and RoHS.

RJ45 LAN Adapter Ethernet Network Protect Device Arrester Surge Protector Lightning Arrester Shielded Aluminum Alloy Function: RJ45 coupler help extend the connection between two Ethernet patch cables, they are compatible with Cat7,Cat6, Cat5e,Cat5 network

RJ45 LAN Adapter Ethernet Network Protect Device Arrester Surge Protector Lightning Arrester Shielded Aluminum Alloy Black Function: RJ45 coupler help extend the connection between two Ethernet patch cables, they are compatible with Cat7,Cat6, Cat5e,Cat5 network

UPS IMPULSE series SLIM 5004200 VA is a series of highly efficient, reliable and affordable UPS lineinteractive topology with sinusoidal output signal. Thanks to the builtin AVR voltage stabilizer, all models of the SLIM series maintain the output voltage within the normal range at undervoltage or overvoltage of the mains, optimally using the battery resource. This allows not only to provide guaranteed stable backup power in case of voltage loss in the incoming network, but also to protect critical equipment from damage that may result from voltage surges. Following the high requirements of fire safety, the enclosures of the IMPULSE UPS of the SLIM series are made of impactresistant ABS plastic with fireresistant properties. This inherently ensures the shock resistance and fire safety of the electrical protection equipment.

UPS IMPULSE of the JUNIOR PRO RT series, 10003000 VA is a series of highly efficient, reliable and affordable UPSs of lineinteractive topology with a sinusoidal output signal. Thanks to the builtin AVR voltage stabilizer, all models of the JUNIOR PRO RT series maintain the output voltage within the normal range at low or high mains voltage, making optimal use of the battery resource. This allows not only to provide guaranteed stable backup power in case of voltage loss in the incoming network, but also to protect critical equipment from damage that may result from voltage surges. The universal case allows the JUNIOR PRO RT series UPS to be placed in a tower configuration or mounted in a rack for maximum use of the workspace.

UPS IMPULSE of the JUNIOR PRO series, 10003000 VA is a series of highly efficient, reliable and affordable UPSs of lineinteractive topology with a sinusoidal output signal. Thanks to the builtin AVR voltage stabilizer, all models of the JUNIOR PRO series maintain the output voltage within the normal range at low or high mains voltage, optimally using the battery resource. This allows not only to provide guaranteed stable backup power in case of voltage loss in the incoming network, but also to protect critical equipment from damage that may result from voltage surges.

KONTRAC GP 550 AC converts the power from transformer outputs of AC network into propulsion power for the traction motors. It has sinusoidal input current in phase with voltage and with low harmonic content. During braking, the converter feeds back energy to the network. All control, protective, communication and monitoring functions are implemented in one control electronics inside the converter.

The UniFi Camera G4 PTZ is a superior surveillance camera for shopping centers, parking lots, airports, train stations, and other transportation hubs. Pairing G4 PTZ’s advanced optical and video technologies with UniFi Protect’s ease of use creates a unique solution for the most demanding environments. G4 PTZ comes with an IP66 weatherproof casing and flexible powering options. Processor Specs: Ambarella S5L66 Memory Information: 1GB Networking Interface: RJ45, 10/100/1000 Mbps Gigabit Ethernet Flash Memory Support: 256 MB Max. Power Consumption: 42.9W Power Method: 802.3bt PoE++ Supported Voltage Range: 802.3bt PoE++ Button: Factory Reset Mounting: Wall Mount (Kit Included) Operating Temperature: -40 to 50º C (-40 to 122º F) Operating Humidity: 0 to 90% Noncondensing Certifications: FCC, IC, CE

The last steps in a project can be very stressful. We relief you from the stress by ensuring that all project requirements are fulfilled before putting your substation into operation. Factory Acceptance Test or Site Acceptance Test are important milestones in a project cycle that we can execute for you. Technical equipment or systems that we take into operation: IEDs (Protection and Control). SCADA and Substation Automation Systems (SCS, SAS). End-to-End communication to control centers (CC). You find a detailed view of our expertise on our website:

DuctSeal LG (Water & Gas) is a NEW re-enterable duct sealing system that is extremely flexible in its ability to seal cables & pipes in ducted networks to protect and stop the ingress of harmful or flammable gases, liquids, smoke and vermin. DuctSeal LG comes complete with our unique daisy chained circular foam tubes that easily wraps and separates cables to ensure limited movement while applying our NEW flexible intumescent, zero halogen and zero Meko adhesive and sealing compound, GreyStuff. All designed and manufactured in the UK. DuctSeal LG, along with GreyStuff, is a non-hazardous, FyBrid superior single-component, neutral curing sealant that has been specifically developed to cope with the harsh environments around duct openings to ensure ducted networks and penetrations are protected.

DuctSeal HG (Water & Gas) is a NEW re-enterable duct sealing system that is extremely flexible in its ability to seal large, heavy cables & pipes in ducted networks to protect and stop the ingress of harmful or flammable gases, liquids, smoke, and vermin. DuctSeal HG comes complete with our PATENT PENDING unique tubular rubber backing system that can be joined together in a long continuous strip, joined to make a ring/collar, but best of all, joined in a cross shape to create a perfect shape for separating trefoil/triplex cables. This unique design ensures DSEAR compliance but also aids the installer as it’s simple & quick to create the support & separation on large cables or pipes. The PATENT PENDING ULTIMATE backing system, which is one of a kind, is combined with our NEW Fybrid flexible intumescent, zero halogen, & zero Meko adhesive and sealing compound, GreyStuff. All are designed and manufactured in the UK.