Filtering equipment and supplies - Import export

Properties • suitable to be placed on top of a silo • jet-pulse cleaning by compressed air • bag or cartridge filter elements • available filter area from 2 m² to 60 m² • removal of the filter elements (clean gas side) from above via hinged cover • available with lateral fan on request (0,75 ÷ 11 kW) • available diameters DN540 and DN790 • body always made of stainless steel 1.4301 and cover made of aluminum • parts in contact with the product in mild steel or stainless steel

Properties • no screws, pull-in sleeves or stiffeners in contact with the product on which the product can deposit • all parts that come into contact with the product are suitable for contact with food • continuously welded seams • hinged, lateral inspection hatch, which closes practically without dead space, with replaceable and washable seal • parts in contact with the product made of stainless steel with material certificate 3.1 according to EN 10204 • available for applications in positive or negative pressure or equipped with a fan

Filtration process is a simple mechanical treatment applied to water for the suspended solid removal.

Hardness in water is caused by certain salts. The main ions causing hardness are Calcium (Ca2+), Magnesium (Mg2+) and Bicarbonate (HCO3).

A convenient and reliable technology of separation for treatments of surface water, conditioning and sterilization, civil and industrial sewage.

A saline solution is put in contact with a water permeable membrane (but impermeable to the dissolved solids) at a pressure higher than the osmotic pressure of the solution.

This process removes ionizable species from liquids using electrically active media and an electrical potential to effect ion transport.

High performance physicalchemical separation process for water clarification, sludge thickening and raw material recovery.

High performance physicalchemical separation process. Flotation and settling flotation processes simultaneously applied.

High performance and modern conception clarifier. Application of advanced technology of the fluids passing into a lamella system.

Vertical saturator designed and tested in accordance to installation Country Directives.

Continuous operation thanks to sand washing device, no stopping for backwashing required.

Fine filtration, water clarification, raw material recovery depending on the application.

Simple design, modular concept, easy to install and flexible for the operation.

Fractioning, separating filter reliable, self cleaning, continuous operation.

High performance gravity machine, no vacuum required, no particular installation sites.

Highly effective equipment for dewatering by gravity. Operation at a minimal cost, low volume of wash water consumed.

MC can be equipped with slotted or holes baskets and thanks to its design, the thickening factor is reduced to the minimum, ensuring optimum runability.

Ink particles previously detached within the pulper, are removed by rising air bubbles. Atmospheric air is used so no compressor is required.

HC Pulper has been designed to optimize the slushing effect which is a milestone along the deinking process.

It’s the first barrier against contaminants. Thanks to its action, contaminants like plastics, metallic pieces, etc. are taken out.

HDC Cleaner, by centrifugal separation, allows the evacuation of contaminants as staple, stones, etc.

Centrifugal action, fundamental to optimize the separation, is ensured by the geometry of the cleaner itself.

Depending on the process chosen and customer requests, LC screens could be preferred to MC ones, or could be even combined together.

The function of WU is to remove from the stock ashes, ink particles still present and fines.

Pressurized DUP aim is to disperse the contaminants still present into the stock to a dimension no more visible to the human eyes.

LCC Pulper has been designed to optimize the slushing effect by increasing either cutting and opening of the fibers.

Part of the stock is conveyed to DSC and its function is doing a stock pre screening and keeping, as much as possible, pulper’s vat clean.

The function of this equipment is to recover water and fiber from the dumping screen light reject and to convey it back to the pulper.