Machine electrics - Import export

Electric sewing machine Mod. FPMP 82 (220 V and 12 V ) for bags particularly robust, vibration-free, usable in agricultural industries, chemical, food, packaging, textiles, for use in finishing. Suitable for sealing bags of a different type of paper, jute, fabric and plasticized, etc. such as bags of food or chemicals. The FPMP 82 can be used for the sewing of the collection nets of olives or antihail. The operation with reciprocating motion with "wear" arrangement allows a very efficient grip even on medium to high thicknesses. The machine works with standard 220 volt electric cable. It's also available in 12V that can be equipped with external battery and backpack. For uses other than those listed please send us a test sample of your product.

Electric sewing machine for sacks model FPGK 350. This model is recommended for production up to 450 sacks per day. New model of the FPGK series designed for the seam of juta, paper, fabric, plastic and net bags. The front part of the stapler is made of metal while the handle is made of plastic. Given its features this electric sewing machine is suitable for farms, warehouses, post offices and food and chemical industries. It is a good solution for the closure of bags of any material and dimension due to the automatic feed. This light and handy machine is the fastest in its class. The standard model must be connected to the electric current of 220V. The maximum span passage is 10 mm. The material you can sew, if different from those listed must be low density (to avoid breaking of the needles).

Electric sewing machine for sacks model FPGK 2701 with metal and plastic structure to contain the weight and ensure maximum safety. The models FP GK are designed for the seam of juta, paper, fabric, plastic and net bags, and they are recommended for productions up to 400/500 sacks at day. The quality of the components guarantees high performance in every working condition and on each type of material. The weight, just 2700 gr and the ergonomic handle make it very handy. The standard model must be connected to the electric current of 220V. The maximum span passage is 8 mm. The material you can sew, if different from those listed must be low density (to avoid breaking of the needles).

Electric sewing machine mod. FPMP 83 (220 V and 12 V) with dual drive, built on the basis of the mod. FPMP 82. The upper and lower dragging allows high performance on all materials. Operation with double reciprocating motion, device "antiwear" with power highly efficient even with high thicknesses and slippery materials. The sewing machine is used in agricultural, chemical, food, packaging and textile applications. Suitable for closing bags of light fabric and for coupling pieces of fabric together. The FPMP 83 is also suitable for the sewing of nets, such as those for the collection of olives or antihail. For uses other than those listed please send us a test sample of your product.

The electric sewing machines for bags series FPGK are reliable and economical. Recommended for production up to about 400 to 500 bags per day, can be easily handled and transported to various sewing locations. Simple and compact, are equipped with a structure in aluminum alloy and plastic of high quality and mechanical parts in steel. Staplers are suitable to close sacks made of jute, paper, fabric, plastic and network for sewing fabrics, nets for agriculture, cartons, etc. The material you can sew, if different from those listed must be low density (to avoid breaking of the needles). The standard model comes with 220 Volt and is equipped with kits transformer 12V / 220V, backpack, batteries and chargers. The transformer 12 volt / 220 volt is oversized and equipped with all the safety measures necessary to the safe operation and long-lasting equipment. Safety devices include: battery alarm, battery low shutdown, overload and overheating. The backpack allows you to move comfortably.

Electric sewing machine Mod. FPMP 73 (220 V or 12 V) for the closure of bags of each type of paper, jute, fabric and plasticized, low thickness pvc, etc such as bags of salt or coffee. The operation with reciprocating motion with "wear" arrangement allows a very efficient grip even on medium to high thicknesses. The FPMP 73 is also suitable for the sewing of nets, such as those for the collection of olives or antihail. The machine works with standard 220 volt electric cable. It's also available in 12V and can be equipped with external battery and backpack.

MG 1020 SEALING MACHINE WITH CLOSING MAGNET Pulse sealers MG 1020 series, with 1020 mm sealing bar and suitable for sealing polyethylene, pvc and polypropylene bags. They have a special timer for adjusting the sealing time based on the thickness and type of material. The MG sealers are complete with a manual cutting unit for the trimming of the sealed bags and/or the creation of bags from tubular reels (if the machine is equipped with a roll holder). The sealing bars must be closed manually by the operator and are automatically held by a magnet until the end of the cycle. There are special supports with mechanical pedal, for the manual sealing machine and with electric pedal for the sealing machine with motorized bar closing. Available models: MG 1020: bench sealing machine with manual closing of the bars MGMI 1020: bench sealing machine with motorized closing of the bars and electric pedal

MG 421 SEALING MACHINE WITH CLOSING MAGNET Impulse sealers MG 421 series with 420 mm sealing bar and suitable for sealing polyethylene pvc and polypropylene bags. They have a special timer for adjusting the sealing time based on the thickness and type of material. The MG sealers are complete with a manual cutting unit for the trimming of the sealed bags and/or the creation of bags from tubular reels (if the machine is equipped with a roll holder). The sealing bars must be closed manually by the operator and are automatically held by a magnet until the end of the cycle. They can be equipped with special supports with mechanical pedal, for the manual sealing machine and with electric pedal for the sealing machine with motorized closing of the bars. The MG 421 series sealing machines are available with bars with mechanical or motorized closure with a sealing thickness of 3 or 5 mm depending on the model. There are also special models in stainless steel and with 2 parallel welds of 3 mm.

MG 300 SEALING MACHINE WITH CLOSING MAGNET Impulse sealers MG 300 series, with 300 mm sealing bar and suitable for sealing polyethylene, pvc and polypropylene bags. They have a special timer for adjusting the sealing time based on the thickness and type of material. The MG sealers are complete with a manual cutting unit for the trimming of the sealed bags and/or the creation of bags from tubular reels (if the machine is equipped with a roll holder). The sealing bars must be closed manually by the operator and are automatically held by a magnet until the end of the cycle. There are special supports with mechanical pedal, for the manual sealing machine and with electric pedal for the sealing machine with motorized bar closing. Maximum weldable thickness 0.15 mm (0.30 tot). Available models: MG 300: bench sealing machine with manual closing of the bars MGM 300: bench sealing machine with motorized bar closing and electric pedal

Skinpack packing machine at semiautomatic cycle to package objects of either small, medium or large size, between cardboard and transparent plastic film. The skinpack package allow immediate display of the product, possibility of both advertising in colour on the cardboard surfaces, practicality of the packaging, which can be hung in showcases. Safety protection with sensors. The cardboard support can be replaced with a sheet of bubble wrap (bubble polyethylene). CE-approved machine with low voltage controls, electrical panel with Siemens PLC, safety module (Pilz), safety protection on the work area with safety sensor (the movement of the frame descent only occurs with closed protection, the movement of ascent is driven by a dual control). The packaging machine mod. FP-390 has a limited energy consumption as the resistors are activated only at the time of packaging (on the other Skinpacks the resistances are always on) and there is no risk of overheating.

Semiautomatic table top version or with pedestal sealing machine with electrical pedal and double sealing impulse bar, (resistance to heat for a few seconds), suitable for closing envelopes polyethylene, polypropylene, PVC, coupled in aluminum, etc. The closing of the sealing bars by pressing the electric pedal with solenoid allows the operator to have both hands free. The timers for adjusting the sealing and cooling ensure maximum reliability of each type of material. Simple to use, requires no preheating. The double sealing bar (above and below) and the sealing of 5 mm. allows the closing of envelopes with thick, laminated bags and bellows. Through a selector switch, you can choose whether to use one or two sealing bars. Maximum solderable thickness 0.25 mm. (0.50 mm. overall). It's also available the model ME 6010 FDA / FDV with 600 mm sealing bars and 10 mm welding.

ME-ASD SERIES with 10 mm DOUBLE SEALING BAR BY IMPULSE WITH TEMPERATURE CONTROL Semiautomatic bench sealing machine with electric pedal and double impulse sealing bar with temperature control, (an electronic circuit prevents overheating and allows continuous operation), suitable for closing polyethylene, polypropylene, PVC, aluminum coupled bags, etc. The sealing bars are closed by means of an electromagnet with foot control. Timers for sealing and cooling control ensure maximum reliability on all types of material. The "cold closing" time allows the bars to remain closed for a time set by the operator and apply a pressure that reinforces the sealing. The ME ASD series sealers can in some cases be used for sealing advertising banners and creating pockets for fixing them.

Impulse sealers MG 820 series, with 820 mm sealing bar and suitable for sealing polyethylene, pvc and polypropylene bags. They have a special timer for adjusting the sealing time based on the thickness and type of material. The MG sealers are complete with a manual cutting unit for the trimming of the sealed bags and/or the creation of bags from tubular reels (if the machine is equipped with a roll holder). The sealers bars must be closed manually by the operator and are automatically held by a magnet until the end of the cycle. There are special supports with mechanical pedal, for the manual sealing machine and with electric pedal for the sealing machine with motorized bar closing. Available models: MG 820: bench sealing machine with manual closing of the bars MGMI 820: bench sealing machine with motorized bar closing and electric pedal

Impulse sealers MG 621 series, with 620 mm sealing bar and suitable for sealing polyethylene, pvc and polypropylene bags. They have a special timer for adjusting the sealing time based on the thickness and type of material. The MG sealers are complete with a manual cutting unit for the trimming of the sealed bags and/or the creation of bags from tubular reels (if the machine is equipped with a roll holder). The sealing bars must be closed manually by the operator and are automatically held by a magnet until the end of the cycle. There are special supports with mechanical pedal, for the manual sealing machine and with electric pedal for the sealing machine with motorized bar closing. The MG 621 series sealing machines are available with mechanical or motorized closing bars with 3 or 5 mm sealing thickness depending on the model. Also available in stainless steel with mechanical closure of the bars and and 3 mm sealing.

Complete solutions specifically studied and designed for a more efficient and automatic management of evaporative cooling towers and industrial coolers. Some advantages of integrated cooling systems. - Program and modulate the progress of the machine during its use. - Optimize electricity consumption and water treatment. - Dosage and salinity control. - Water collection. - Remote monitoring and predictive maintenance possibility.

The semi-automatic capper model 'TSP' is suitable for applying aluminum (or plastic) screw caps to glass bottles. This semi-automatic machine is made of stainless steel and features a pneumatic bottle lifting system. The caps are manually placed on the bottle, while the operation cycle is activated with 2 buttons on the side of the machine. The machine operates electrically with a contactor and CE-compliant safety guards. After the cap is threaded and sealed, the platen automatically descends, allowing the removal of the capped bottle and replacing it with another to be closed. The capping head has 4 stainless steel rollers and comes with a No-Cap No-Roll safety device, suitable for all types of closures, including Stelvin 30x60 caps. It is suitable for all standard bottle sizes ranging from 25cl to 150cl. A magnetic friction head is available for pre-threaded plastic caps or twist-off caps. Production capacity: approximately 600 bottles per hour.

The machine can handle pallets measuring 1000 x 1200, with a maximum height of 2000, with flat separators between layers of plastic or rigid cardboard containers or trays. It's a stationary platform depalletizer; with this system, it's possible to load the pallet into the machine already without the cardboard hood, using a pallet truck or forklift on the dedicated centering frame ensuring correct positioning. The machine features a robust and compact structure with linear guides to ensure movement precision. It utilizes inflatable rubber gripping heads for 3 rows of bottles, suitable for bottling lines with production rates up to 3,000 b/h. Alternatively, there's a version with gripping heads for picking up an entire layer of bottles. Magnetic gripping heads are also available for depalletizing metal cans. Format changeovers are simple and very fast by adjusting the position of the rubber according to the format. The machine is equipped with an electrical panel and control panel.

CNC machined parts and components made by milling and turning with CNC machine centers and multi axix turning lathes from alluminium, steel, plastics ecc. Application: electrical appliances sector

Thrust ball bearings are separable axial bearings. Features of thrust ball bearings: ideal for reduced and medium speeds they bear relatively high axial loads separable and easy to assemble Single direction thrust ball bearings can accomodate axial loads in one direction and thus locate a shaft axially in one direction. Double direction thrust ball bearings can accomodate axial loads acting in both directions and thus serve to axially locate a shaft in both directions. These bearings, in both versions, have been designed to withstand only axial loads and must not be subjected to radial loads of any kind. Series: 51100, 51200, 51300, 51400 APPLICATIONS: Earthmoving machinery Agricultural machinery Pumps Cleaning Equipment / Industrial cleaning machines Bottling / Filling carousels Electric motors Fitness machines Metalworking machines Glass, marble and woodworking machines Automatic opening systems Oil Industry Oil and Gas rotary tables Vertical shafts