Laminated panels - Import export

Cement-bonded particleboards are used in "dry installation" technology. Thanks to their parameters, they are used in construction, including in structural elements. CW panels are fireproof - according to the European standard EN 13 501-1 they are classified as BS1D0 (flame retardant) and A2 (non-flammable). They have soundproofing properties (30-35dB). They are resistant to various atmospheric conditions, such as frost or moisture, to mold and mildew, and thanks to their cement content - also resistant to insects. Cement-bonded boards are a resilient material - the modulus of elasticity of the boards is more than 4500 N/mm2, the bending strength is greater than 9 N/mm2. They are easy to work with, as well as environmentally friendly and safe for health, as they do not contain any hazardous substances such as asbestos or formaldehyde.

All shuttering boards are coated with a special phenolic film, so that concrete does not stick to them and they are waterproof. Protecting the edges with acrylic paint further prevents moisture penetration. They provide a smooth concrete surface after formwork. Poplar Class A - a board made of the highest quality poplar, the center without inserts, with a double-pressed phenolic film Poplar Grille - slab made of very good quality poplar with double-compressed phenolic film Poplar recycled - recycled board of very good quality

The three-layer bonding guarantees high measurement accuracy. Each of the three layers, both the longitudinal outer layers and the diagonal inner layer, is waterproof. They are covered with a special coating of melamine resin, which prevents concrete from sticking and makes them easy to clean, and with paint, which provides protection against harsh weather conditions. Thanks to the sanded surface, the concrete structure is perfectly smooth after formwork. Pfeifer formwork panels are available in both wrought with front edge protection and unwrought versions.

OSB/3 is made from pine chips, which come primarily from nurturing forest clearcuts. In the outer layers, the chips are arranged parallel to the longer side of the board, while in the inner layers they are arranged perpendicularly. This microstructure gives it high rigidity and resistance to bending. Thanks to the use of modern technologies, the board is characterized by excellent parameters. It is easy and inexpensive to process, resistant to harsh weather conditions, and provides excellent acoustic insulation. A big plus is also the ease of its installation. It is available in two variants: with straight edges and with four-sided tongue-and-groove milled edges.

The outer layer, 1.5 mm thick, is made of birch or pine veneer. Joinery board is available in two types of bonding: dry-resistant with a urea-formaldehyde resin-based bond for use in dry conditions, and water-resistant with a phenol-formaldehyde resin-based bond for use in wet conditions. The blockboard is lightweight and easy to work with, resistant to deformation.

Hardwood plywood is produced from selected raw material, so there is less dusting during processing, the edges after cutting are very precise, and the engraved details are extremely clear and accurate. It is also available with melamine film.

Waterproof, covered with a hot-pressed phenolic film with a mesh imprint. Inner layers can be of hardwood veneers (homogeneous) or a combination of hardwood and softwood (combi). High resistance and excellent surface protection against mechanical and chemical damage. This product is also available in a non-flammable version in the Bfl-s1 standard.

It is a hardwood, waterproof plywood covered with melamine film, which is a paper impregnated with resin. It is pressed onto the plywood at high temperature, under high pressure. The advantages of film-faced smooth plywood are high mechanical strength, UV resistance and biological durability. In the non-flammable version in the Bfl-s1 standard, it is excellent for construction and interior finishing as a structural and non-structural material. Polish product.

Manufactured from the highest quality hardwoods and softwoods. It consists of multiple veneer layers, in which the fibers are arranged perpendicularly. It is glued with phenolic resin glue. Resistant to harsh weather conditions and water.

It consists of multiple veneer layers, in which the fibers are arranged perpendicularly. It is glued with urea-formaldehyde resin, meeting the E0.5 standard according to PN-EN 636 for formaldehyde emissions. It makes an excellent construction material. Dry-faced raw plywood is designed for use in dry conditions.

It consists of multiple veneer layers, in which the fibers are arranged perpendicularly

With our interiors with MDF laminated panels! Experience the perfect blend of style and durability as these panels bring a touch of sophistication to your spaces. Easy to install and maintain, unlock endless design possibilities and create a seamless, contemporary look that stands the test of time.

Black MDF Board is pretty much a standard MDF board that has been dyed throughout with a black pigment during the manufacturing process. Cut it, shape it drill it, machine it, the end result is a black faced, black core MDF board. Black MDF wood panels are made by a number of companies including Valchromat, Fibracolour and Spanalux. We have access to all three manufacturers products however, we currently only stock the Spanalux black coloured MDF version. Our Black throughout MDF sheets are available in a maximum, untrimmed size of 2440mm x 1220mm and thicknesses of 9mm, 12mm, 16mm 19mm and 25mm. Finishing Black Core MDF To further enhance your project we can, upon request, supply our Black Dyed MDF panels with a laminated finish from a number of suppliers, in a wide range of colours. We can also provide Black MDF panels cut to size and clear lacquered in a water based PU coating, if required.

Moisture resistant MDF (MR MDF) is the most versatile of all the MDF products. It is perfect for high moisture areas such as bathrooms and kitchens and invaluable for painted MDF panel projects. Due to its resistance to moisture ingress, MR MDF is perfect for projects such… Skirting Boards Bathroom wall panelling. Kitchen Wall Panelling. Laminated or Painted kitchen cabinet doors. and any indoor environment where moisture may be a concern. In addition, we also recommend it for all DIY painted MDF projects as it is less prone to fibre lift when painted. Using this product will save you a lot time and preparation to achieve perfectly smooth edges.

Tables and chairs Glue-laminated panels and beams Furniture components Interior and exterior cladding boards Flooring boards Mouldings Frame structures Window and door industry Packaging industry 47/50 x 150/200 x4-6m

Tables and chairs Glue-laminated panels and beams Furniture components Interior cladding panels Flooring boards Mouldings Frame structures Window and door industry Packaging industry 47/50 x 150/200 x4-6m

Design: Frame structure made of anodized special light metal-profiles, side walls and separating walls made of melamin resin laminated panels, completely surrounded by U-profile.Rear- and front side open. Tray supports made of chromium plated tubular material. Mounted on 4 corrosion protected, ball bearing castors with distance holding bumpers, 2 of them lockable. With acrylic glass doors (completely faced with melamine panels).

Frame structure made of anodized special light metal-profiles. 1 compartment, side walls made of melamine resin laminated panels. Tray supports made of chromium plated tubular material. Mounted on 4 corrosion protected, ball bearing castors with distance holding bumpers, diam. 125 mm, two of them lockable.

Cutlery- and tray-distribution trolley AGW. Design: Frame structure made of anodized special light metal-profiles, side walls melamine resin laminated, panels completely surrounded by U-profile, on top cutlery container with napkin dispenser for 300 napkins. Mounted on 4 corrosion protected, ball bearing castors, 2 of them lock able.

ADDITIONAL INFORMATION Wall Structure: 33mm thick sandwich panel, outer laminate coating, XPS core Floor: Waterproof plywood covered with PVC flooring with increased abrasion resistance Frame: Steel, hot-dip galvanized Additionally in the trailer: Support wheel 4 stabilizing supports Support wheel wrench

Wall Structure: 33mm thick sandwich panel, outer laminate coating, XPS core Floor: Waterproof plywood covered with PVC flooring with increased abrasion resistance Frame: Steel, hot-dip galvanized Additionally in the trailer: Support wheel 4 stabilizing supports Support wheel wrench Metal entry step, mounted on the drawbar Ventilation grille

Hospital wardrobe available with one or 2 solid doors. Inside it has 2 shelves and a clothes rail. Base with 4 metal legs, height 200 mm, painted with epoxy-polyester powders, diameter 50 mm, with height-adjustable feet. Structure made of bi-laminated melamine wood particle panels on two sides, class E1 formaldehyde emission, scratch-resistant, with ABS perimeter edges. Sides, base and top 18 mm thick . Backrest inserted in milled, 10 mm thick

Hospital wardrobe available with one or 2 solid doors. 2 shelf and clothes rail configuration. Base with 4 metal legs, height 200 mm, painted with epoxy-polyester powders, diameter 50 mm, with height-adjustable feet. Structure made of bi-laminated melamine wood particle panels on two sides, class E1 formaldehyde emission, scratch-resistant, with ABS perimeter edges. Sides, base and top 18 mm thick . Backrest inserted in milled, 10 mm thick

CANOE TV Stand Material: Wood veneer laminated and lacquer finished MDF panel. W:150cm, H:50cm, D:35cm. Wrapped with soft plastic sheet and boxed in triple wall cardboard box.

OSCAR TV Stand Material: Decorative paper laminated MDF panel. Metal handles and legs in Gold color. W:150cm, H:50cm, D:35cm. Wrapped with soft plastic sheet and boxed in triple wall cardboard box. Available in different color and patterns. Please ask for our catalog.

Mobile leaded x-ray barriers can be produced in desired size and properties.It is produced entirely from 1st quality materials and rd50 lead glass can be mounted on it.We produce on wooden, stainless.Mobile X-Ray Barriers are produced with 2mm Lead Laminated Wooden Panels as Standard. Inner Body and Outer Part are Made of 2mm Stainless Steel.Wheel System Has a Bearing System for Long Life.We manufacture Mobile X-Ray Barriers in Various Standards as Stainless Surface and Leaded Glass according to your needs.Contact Us For Different Types Of Fixable And Draggable Types