Leak testing equipment - Import export

Various measurement devices of differing shapes are combined under the term Analysis Equipment. The leak testing device in its various designs and the flowmeters are supplemented by a hand-held measurement unit for industrial applications. A specially tuned analysis package (software package) is available for the differential pressure flowmeter.

Various measurement devices of differing shapes are combined under the term Analysis Equipment. The leak testing device in its various designs and the flowmeters are supplemented by a hand-held measurement unit for industrial applications. A specially tuned analysis package (software package) is available for the differential pressure flowmeter.

Various measurement devices of differing shapes are combined under the term Analysis Equipment. The leak testing device in its various designs and the flowmeters are supplemented by a hand-held measurement unit for industrial applications. A specially tuned analysis package (software package) is available for the differential pressure flowmeter.

Various measurement devices of differing shapes are combined under the term Analysis Equipment. The leak testing device in its various designs and the flowmeters are supplemented by a hand-held measurement unit for industrial applications. A specially tuned analysis package (software package) is available for the differential pressure flowmeter.

Various measurement devices of differing shapes are combined under the term Analysis Equipment. The leak testing device in its various designs and the flowmeters are supplemented by a hand-held measurement unit for industrial applications. A specially tuned analysis package (software package) is available for the differential pressure flowmeter.

Various measurement devices of differing shapes are combined under the term Analysis Equipment. The leak testing device in its various designs and the flowmeters are supplemented by a hand-held measurement unit for industrial applications. A specially tuned analysis package (software package) is available for the differential pressure flowmeter.

The test chamber is used for performing leak tests on mechanical fittings and pressure pipes under hydrostatic internal pressure while subjected to bending. We can also provide with a pipe tester for building up the test pressure according to ISO 3458. According to ISO 3503 , pneumatic force application , bending templates for different sizes

used for leak testing of compression fittings, 7 inch touch display, thermal printer, USB data out to excel file, automatic pressure control, automatic pressure cycle control, automatic time control

The Combined test stand is used to carry out leak tests on pipe connections while they are going to have some mechanical force application for bending and crimping of the joint. It is used for testing of plastic pipes like corrugated one for joint's sealing. According EN 1277 , EN 1035 , Computer controlled , windows based software , control unit separate from cabin , bending and squeezing device , special end plugs

As a manufacturer of vacuum pumps and vacuum parts Vacuum El System provides a vacuum leak test in clean areas, using the most up-to date equipment and procedures. All welded flanges, fittings and chambers are cleaned carefully and inspected by Helium mass spectrometry in order to meet customer requirements. Our Leak testing equipment is able to achieve 10 ̄ ¹º mbar l/sec. Leak Test Certificates are available on request.

Experience unmatched accuracy and reliability with IMS helium leak detectors. Designed and built to provide advanced, (semi) automated helium gas leak detection tailored to your products. Our detectors, equipped with the best Mass Spectrometers, accurately count helium particles, ensuring meticulous leak testing for a wide range of customer products. From a few centimeters to one meter in size.

In order to ensure that castings, valves, pumps, hoses and other components or groups have been manufactured free of leakage, they are tested in non-destructive leakage tests. Oxygen, air, nitrogen or sulfur hexafluoride (SF6) can be used as the test medium.

Development of rotating components require intensive testing. While the main goal may be reaching durability and life targets,noise , vibration, temperature and other parameters may play an important role for the customer expectations. Therefore, Novosim offers a customizable testing dynamometer which may be used to in the product development of passenger, commercial, heavy duty or even military vehicle components. Software is easy to use and also highly customizable allowing different product lines to be tested under a single system. With the help of regenerative braking, electricity is recovered and loops back to the test system providing efficient operation. Assuming the tests may run about 1 month, the consumption can be an important parameter for cost control. Different types of data can be collected and stored in a database for further comparisons and tracking of the development process. System automatically generates a report which is also customizable.

Alpha Cabins (Determination of acoustic properties of materials) Cabins are used to determine the acoustic absorption properties of materials and are generally called "acoustic test cabins" or "reverberation rooms". These cabins are designed to detect the sound absorption properties of materials against frequency, measure their acoustic performance and determine their properties. Here are some of different types of cabins: ​ Reverberation Rooms: In these rooms, sound waves hit and reflect on surfaces and resonate for a while. In this process, the acoustic absorption capabilities of the material are measured. Acoustic Test Booths: These booths are designed to evaluate the acoustic performance of specific materials or products. They often include high-sensitivity microphones, sound sources and measuring devices. Acoustic Rooms: These rooms are generally large and can be specially designed. It is used for larger-scale or special tests of the acoustic properties of materials.

This system is very valuable for testing the durability and expected life of the transmissions, axles, gears, transfer cases and shafts under various scenarios. It is hard to do vehicle level durability tests and without the need of getting the vehicle on the road for replicating claims caused by the powertrain, such type of a custom system help replicate the driving conditions where problems occur and the engineering team can develop a solution and iterate on the bench. Easy to use user interface; simplicity in get the system running in a target time is our most important goal. Operators in a test center can quickly receive training and begin running a variety of scenarios. Data from low speed channels such as sensors including thermocouples, RTD temperature sensors, pressure sensors and others can be collected whereas data from fast channels such as acceleration or microphone are collected through data collection (DAQ) systems, depending on the customer's preference.

ForTest avails of highly qualified staff capable of supporting you in the event of technical or application problems. Both over the phone or on the client's site, ForTest can resolve any support request in the shortest time possible. The ForTest periodic calibration service consists of scheduling a periodic calibration plan to guarantee metrological traceability compared to the national samples and therefore meet ISO9000 standards. Calibration can be carried out in our laboratories or on your site to avoid production downtime.

A touch of innovation The new T8990 leak tester was designed to improve what was considered the best device in ForTest's history, the M8990. The new video controller “ForTest MMI” brought a superior level of human-machine interaction, thanks to an innovative capacitive panel in tempered glass, around a splendid 6.2” colour display. Parameter programming is much faster thanks to the new numerical keyboard integrated in the menus, and the big display makes viewing even clearer of the test cycle. The main screen also enables interaction with shortcut functions, such as test program change, "smart" test archive menu and locking/unlocking using a password. Limitless connectivity. The new T8990 equipment includes ports for the USB slave, RS232, RS485, Can bus, TTY, Profinet and EtherCAT. Assembly may also include an optional Ethernet port and a 26-pole connector with 4 inputs and 8 outputs, which are completely programmable, for interfacing with the external valves, safety barriers

Leak Test Manager is a software application for PC compatible with Windows XP, 7, 8 and 10 that allows interfacing ForTest equipment to a computer via an RS232 connection (or Ethernet if optional is available on the instrument) The features offered by the software are the follows: Real-time display of data detected by the control unit Graph of pressure and decayin real time Set test parameters directly via software Automatically download test results to Excel, Access or CSV files Interface to barcode reader for article code tracking with test results Possibility to start/stop/change testing programs History of the results with measured values Is it possible to require a demo version of the software for evaluation purposes

The T9731 is specifically designed for measure the adequate air flow rate in complete adherence to the standard EN 14683 for surgical masks testing. As shown in diagram C.1 on page 12 of the standard EN14683 , the instrument is equipped with two air flow meters of type Mass-flow with scales 0.0...20.0 nLitres/minute (2.12 of diagram - point C.2.1) servo driven valve controlled from the software (10 of the diagram - point C.2.4), and a double gauge / differential pressure measurement (M1 and M2) as expressly indicated in point C.2.2 . In order to comply with both the ISO accreditation standards and the expectations of the reference standard, the pressure measurements in “Differential" mode (or pressure drop) occurs in Pa or Pa/cm2 in case the sample area is set in the menu TST with area different from 1.00 cm2. The connecting "short form" attached to the manuals providesconnection to an external vacuum pump (C.2.3), not provided.

Pressure ranges: -1 bar, +/- 5 mbar, +/- 50 mbar, 200 mbar, 1 bar, 6 bar, 10 bar, 20 bar, 30 bar, 400 bar (high pressure version), negative and positive gauge pressure ranges can be combined. Measuring ranges: ± 500 Pa / ± 5,000 Pa (display resolution: 1 Pa, internal resolution: effectively 0.01 Pa) Result units: Pa, hPa, PSI, Pa/s, hPa/s, mbar • l/s, ml/min, ml/h, l/min, l/h, mmHg, mmWs, Torr Types of test: Standard: Pressure decay Optional: sealed component, dynamic pressure measurement, pressure steps, pressure rise (with double leak connector) Parameters can be exported to a USB stick or imported again. The storage of measurement series and waveforms is possible. Interfaces: Standard: Digital I / O, RS-232 Optional: Profibus DP, Profinet, Ethernet, EtherCAT, Bluetooth, USB Dimensions: 345 mm x 145 mm x 435 mm (W x H x D) In the high-pressure version, leak tests up to a test pressure of 400 bar can be carried out according to the pressure rise method.

The CETATEST 715 series includes fully automatic working leak tester for the detection of untight parts within the cycle time of the production process. The leak tester uses a gauge pressure sensor and has a large measurement range. Therefore the CETATEST 715 is especially qualified for the simple testing of parts with large leakages, as they occur in the testing of valves. The test types "sealed component" and "dynamic pressure" can also be integrated. Typical applications: Testing of sanitary fittings, plastic welds, check valves Operating methods: Single-channel operation, two-channel operation The measurements in two-channel operation are synchronous. Measurement ranges: Max. +/-10,000 Pa Result units: Pa, hPa, PSI, Pa/s, hPa/s, mbar*l/s, ml/min, ml/h, l/min, l/h, mmHg, mmWs, Torr Pressure ranges: -1 bar, 200 mbar, 1 bar, 6 bar, 10 bar, 16 bar, 20 bar, negative gauge pressure and positive gauge pressure ranges can be combined.

Package Leak Detection system using a water-based bubble test. LEAK-MASTER® EASY allows the detection even of the smallest of leaks. After the package is placed into the chamber filled with water, the head space above the water level is evacuated using a venturi vacuum (compressed-air) system. This causes the package immersed in the water to inflate, allowing any leaks and their location to be identified by a stream of bubbles. Benefits: economical and uncomplicated visual inspection allows localisation of the leak for all flexible and rigid kinds of packaging (food-, pharmaceutical-, industrial- and other packaging) short testing period (< 30 sec.) easy-to-use intuitive operation – no special skills required easy installation and start-up no trace gas required in package can also be used for altitude simulation optionally also for vacuum packaging, set order-No. 956992700 no calibration required various chamber sizes avail

The CETATEST XS is a compact, fully automatic leak tester for the detection of leaking parts within the cycle time of the production process. The tester is designed for leak testing of small-volume test parts and short total testing times. It is equipped with a gauge pressure sensor, through which the leak-related pressure decay is detected during the measurement time (relative pressure method). Using the application software CETA Soft XS the parameterisation of the test programs is carried out. Measurement results and pressure variation curves can be recorded. Typical applications: Leak tests which require a large measuring range.

This equipment was developed to test watertight function in grommet using an air pressurized chamber to simulate real conditions of water pressure applied to grommet, without destroying or causing damage to the electrical harness wires. It includes a workbench with a sealed chamber and an electrical cabinet with interface and control device. Features: - Different types of chambers available: Acrylic or Inox - Different chambers sizes available - Multi chambers available with optional independent chambers test - Exchangeable test plates, allowing to test several grommets in the same equipment by exchanging the test plates only - PLC e HMI – Interface and control - Test by: pressure; vacuum; pressure & vacuum; or pressure & water for visual inspection - Tests up to 500 mbar - Scanner, printer and RFID integration - Adjustable test parameters (test pressure, min pressure, time limit, etc) - Tests results statistics - User ID

Various test rigs: - Alternating bending test rig for seating furniture: seat/back rest load acc. to BIFMA X5.1, EN 581-2, EN 1335, EN 1728, BS 5459 - Double test rig for chair testing: seat and backrest tests, side-to-side tests and armrest tests according to EN 1335, EN 581-2, EN 1728, BIFMA X5.1, BIFMA X5.4, BIFMA X6.5, BS 5459 - Test rig for alternating bending tests of arm rests according to EN 1335, EN 1728, EN 581-2, DIN 4551, BIFMA X5.1 and BSI/BS 5459 - Portal drop test rig: testing of chairs, stools, tables, beds acc. to BIFMA X5.1, BIFMA X6.1, EN 581-2, EN747-2, EN 1728, EN 1730, ISO 7173, EN 12520, EN 14072 - Test bench for determining the stability of chairs in accordance with the standards EN 1022, EN 1729-2, EN 581-2, ISO 7174-2 and BIFMA X5.1 - Test rig for tilting drop tests at chairs according to DIN 68878/1 - Swivel test rig according to DIN 4551, EN1335, NEN 1812 and BIFMA X5.1

The Box Opening Pressure Tester has been designed to measure the opening force of flat stacked carton boxes. The Box Opening Pressure Tester is used for the development and quality control of cartons during production, there for speeding up production set-up time. This motorized test stand is a highly configurable single column force tester for tension and compression measurement applications up to 300 lbF (1.5kN). It has a rugged design suitable for laboratory and production enviroments. With generous travel, clearance and depth dimensions, a wide range of tests can be performed, including break testing, cycling, limit testing to a load or distance, loadholding, elongation testing, tensile testing, compression testing and more.

The MP Computer is a comfortable, comprehensive and easy-to-handle evaluation, display and control unit for different types of engine test beds. Its clear and ergonomic arrangement fascilitates the work with the test bed. Desired loads can be adjusted quickly and easily. Specialists are not required. Many optional additional functions increase enlarge the comfort of the MP Computer. Maintaining permanent accuracy of torque measurement is facilitated by a semi-automatic calibration routine. Existing engine/motor test beds can be modernized by an MP Computer. Examples of optional additional functions: - Automatic gravimetric determination of the specific fuel consumption. - Several possibilities of output and documentation of measured values. - Acquisition of non-electric and electric measuring values on combustion engines, electric machines, etc. - Special functions required by certain measuring tasks.

Ballistic Block Damping Bricks Ballistic Rubber Block Specially formulated with rubber supported by flame retardant chemicals. Due to the fact that rubber is produced by vulcanizing under high pressure and high temperature, the rubber is able to trap bullets much higher than its volume. The hardness of the produced blocks was adjusted to protect the projectile from splashing on the surface. Blocks on the side walls are produced in such a way that the projectiles do not bounce the bullet for interactive targets. It is designed to be used in Homeland Security, Military and Police Schools, Security and Special Protection Systems and in all shooting ranges.