Cables for welding - Import export

Ideal for shear studs and threaded studs High repeatability Hydraulic plunge damper Standard support with 2 legs Body Polyamid Compensation for stud length variations up to 8mm Control cable plug (4 wire) Stud welding with shielding gas: optional

Best for stud welding using shielding gas ø 3 – 16 mm High repeatability Standard support with 2 legs Body made of fibre-glass reinforced polyamide Compensation for stud length variations up to 8mm Control cable plug (4 wire) Stud welding with shielding gas: optional

This miniature force sensor was optimised with respect to its height and is, at only 3.4 mm, the lowest known sensor with strain gage technology. Hardly higher than the diameter of its connection cable, it can also be housed in conditions where space is limited. Along with its minimal geometry, the force sensor is also particularly light. It has a high resonance frequency to follow quickly changing load alternations. Despite its extreme miniaturisation, in its application it remains completely robust and suitable for industry, not only with regard to the highly flexible cable connections or the full welding of sensors for the measurement ranges ≥ 0 … 10 N. The miniature compression force sensors are flat, cylindrical discs with covered bottoms. The central load application button for taking on compression forces is an integrated part of the top, which is the sensor‘s membrane.

The model K 24 is a robust stud welding gun, especially for studs ø 19 - 22 mm Ideal for welding shear connectors Ideal for through-deck-welding td High repeatability Hydraulic plunge damper Standard support with 2 legs Body made of fibre-glass reinforced polyamide Compensation for stud length variations up to 8mm Control cable plug (4 wire) Stud welding with shielding gas: optional

Contract Manufacturing by SEACOMP Get your concept to physical product with our electronics manufacturing services. Use our engineering team to get your design ready for mass production or let us take your perfectly designed product and build it at scale. We help launch electronic devices for home automation, industrial controls, consumer products, and medical devices. Manufacturing is completed in our wholly-owned China facility that is ISO 13485 certified. Our production capabilities include: - PCB Assembly, Surface Mount (SMT), Through Hole Assembly - Wave Soldering - Reflow Soldering - Plastic Injection Molding (vertical and horizontal) - Ultrasonic Welding - Cable Assembly and Over-Molding We also provide the finished assembly of your product before it is shipped anywhere in the world: - Laser Marking - Pad Printing - UV Ink Curing - Label Printing - UV Light Metering - Box Build Assembly - Bulk or Retail Packaging - Warehousing Contact us to learn more.

The stainless steel probe LMP 307 is designed for continuous level measurement in water and clean or waste fluids. Basic element is a high quality stainless steel sensor with high requirements for exact measurement with excellent long term stability. Features: — nominal pressure: 0 ... 1 mH2O up to 0 ... 250 mH2O — accuracy: 0,35 % (opt. 0,25% / 0,1 %) FSO — diameter 26,5 mm — small thermal effect — excellent long term stability — high accuracy Optional Features: — IS-version Ex ia = intrinsically safe for gas and dust — SIL 2 (safety integrity level) — drinking water certificate acc. to DVGW and KTW — different kinds of cables and elastomers — petrol version, welded pressure sensor and housing — mounting with stainless steel pipe

Our latest series of 2 gas-cooled and compact weld heads. They are for smaller outside diameters with a narrow handle for tighter access conditions. Weld head type | Field of application mm | inch | weight | item number OSK 21 CS | OD 3.17 - 21.3mm | 0.125" - 0.839" | 0.8kg | 1.0.2820 OSK 38 CS | OD 3.17 - 38.1mm | 0.125" - 1.500" | 1.2kg | 1.0.2920 Our new generation of compact weld heads for high duty cycle requirements have watercooled clamp housings and clamping levers. Both OSK CW weld heads are operated using a sharable handle and cable assembly. Weld head type | Field of application mm | inch | weight | item number OSK 21 CW | OD 3.17 - 21.3mm | 0.125" - 0.839" | 1.0kg | 1.0.2820W OSK 38 CW | OD 3.17 - 38.1mm | 0.125" - 1.500" | 1.4kg | 1.0.2920W Only one drive unit is needed for all C and CW weld heads.

OBO has reinvented its tried-and-trusted welded cable ladders and optimised them for use in industry. Thanks to their special design and intelligent rungs, they can offer even more installation space and flexible mounting options – for vertical or horizontal installation. Not only the innovative welding of the new rung, for which a patent has been applied, but its well-thought-out hole pattern are also perfectly tailored to the requirements of all kinds of industrial installations. The special feature: The rungs can be filled on both sides using the matching clamp clips. This means that the installation space can be fully exploited, so that frequently the narrower ladders are sufficient, which reduces costs. The range of materials is not forgotten. The ladders are available in strip galvanised, hot-dip galvanised and A2 and A4 rustproof stainless steel versions. In addition, the new ladders can be powder-coated.

The EP range is always equipped with a planetary gear box as transmission. The winches are compact and have a robust construction. he EP range is available only as 400V. All of the winches are equipped with maintenance free bearings. The winches are normally delivered as pulling winches but upon request, they can be delivered as hoisting winches. Most parts are made from steel and have been either painted or zinc plated. These winches have a high performance efficiency and are low in maintenance. When compared with the EW range, these winches have a larger cable storage and their welded steel frame provides a more stable construction. Also there are more additional options. The winches comply with protection classification IP55 and insulation classification F. As standard they are equipped with 2 speeds, as well as an optional 3 speed choice for every type. The connection duration is S3 - 25% up to S3 - 40%.

Concept of RCE control system The control system is a fully digital controlled system. This means there are only digital signal processors (DSP) involved in the entire control system and not any analogue electronic component. All the components of the control system (such as control cabinet, welding power source, each axis and the teach pendant) are linked by a digital bus system. A full digital robot control system brings the following advantages: No influence by any environmental disturbance like inductive fields of welding cables Quickest response time by fastest bus connection > smooth motion of robot Absolute reproducibility of welding result > highest consistency in welding quality Easy diagnosis possibilities of the entire robot control system > less skills and no special instruments for diagnosis are necessary By using modular drive technology and standard PC components a high reliability is guaranteed and the ability to remain constantly at the cutting edge of...

The 7-axis arc welding robot B4LS from the FD series is compact and, thanks to the integrated cable routing, offers optimal protection during the work process. The extended degree of freedom enables a constant torch orientation when immersing in tight work spaces. In addition, the FD-B4LS offers an extended arm compared to the FD-B4S and thus a larger working radius. Due to the high flexibility, several robots can be positioned closer to each other, so it is possible to have a larger number of robots in the cell or system working together. The most important technical data at a glance: Number of axes: 7 Working Range (P-point): R 2008 mm Max. payload: 4 kg Positional repeatability: +/- 0.08 mm Drive system: AC servo motor Drive power: 5650 W Weight: 321 kg

The 7-axis arc welding robot B4S from the FD series is compact and, thanks to the integrated cable routing, offers optimal protection during the work process. The extended degree of freedom enables a constant torch orientation when immersing in tight work spaces. Due to the high flexibility, several robots can be positioned closer to each other, so it is possible to have a larger number of robots in the cell or system working together. The most important technical data at a glance: Number of axes: 7 Working Range (P point): R 1435 mm Max. payload: 4 kg Positional repeatability: +/- 0.08 mm Drive system: AC servo motor Drive power: 3550 W Weight: 189 kg

The new arc welding / handling robot FD-B6 with integrated cable routing and further developed design is designed for all welding tasks and payloads up to 6 kg. Even the connections and cables required for the SynchroFeed welding process are pre-installed. Thanks to higher process speeds and shorter cycle times, the FD-B6 fulfills all requirements for the most demanding handling tasks. • Higher clock speeds for highest industrial speeds • Slim design: Integrated wrist motors prevent malfunctions from devices and workpieces. • User-friendly: Integrated supply lines prevent faults behind the robot arm. • More stable construction: 1.5 times the load capacity for welding tasks with different ranges. Number of axes: 6 Max. payload capacity : 6 kg Working Range (P point): R 1445 mm Positional repeatability: +/- 0.08 mm Drive system: AC servo motor Drive power: 3132 W Weight: 145 kg

The new arc welding / handling robot FD-B6 with integrated cable routing and further developed design is designed for all welding tasks and payloads up to 6 kg. Even the connections and cables required for the SynchroFeed welding process are pre-installed. Due to its outstanding arm length, it is particularly suitable for large work areas • Higher clock speeds for highest industrial speeds • Slim design: Integrated wrist motors prevent malfunctions from devices and workpieces. • User-friendly: Integrated supply lines prevent faults behind the robot arm. • Suitable for up to 6 kg payload capacities. Ideal for corresponding handling applications. Number of axes: 6 Max. payload capacity : 6 kg Working Range (P point): R 1445 mm Positional repeatability: +/- 0.08 mm Drive system: AC servo motor Drive power: 3132 W Weight: 278 kg

KURO cable protection pipes made of unplasticised PVC-U are ideal for the pressure-free underground installation of power and telecommunications cables. They also ensure perfect protection against all kinds of mechanical damage when used as cable protection pipes. HERE‘S HOW YOU BENEFIT: - Manufacture according to DIN 16873 and 8061/8062 - Advanced integral ring seal socket technology with permanent seal and long socket

You can use these products with a welding cable.

TKD | 07 Rubber Cables Flexible Power supply & Control Cable for applications with high mechanical requirements. ( e.g. automotive industries, shipbuilding, machine tool building mining and industries, in quarries and on construction lots.) - Light and middle rubber-sheathed flexible cables - Heavy rubber-sheathed flexible cables - Welding cables - Special rubber cores - for permanent use in water Excerpt of versions: > flat & round > shielded, unshielded > with and without supporting element > UV-resistant, Oil-resistant Excerpt of products: H05RR-F - H05RN-F - H07RN-F - H07RN-F PREMIUM - NSSHÖU H01N2-D - H01N2-E - NSGAFÖU - NSHXAFÖ