Electricity production - Import export

We create and manufacture thermoformed blister packaging, different models and dimensions, according to customer’s specific design and requirements blister trays, blister inserts, blister covers and clamshells. The thermoformed blister packaging can be used in a variety of industries and applications including automotive, electronics, office supplies, toys, consumers goods.

Tape and reel specification for all CXSM SMD crystals.

AG crystals are ultra-miniature SMD components specifically designed to provide 32.768kHz for real-time clocks. Their ultra-small size and rugged construction make them suitable for a wide range of applications including battery powered, hand-held equipment and any application requiring miniaturization Frequency 32.7680kHz (also 75kHz) Ultra-miniature size 7.0 x 1.5 x 1.4mm SMD Low mass and rugged construction Supplied taped and reeled Suitable for a wide range of real-time clock applications

From the design phase of your project, we take care of installing all the electrical and electronic components: electrical studies PLC studies and programming production of electrical diagrams, wiring and installation logbooks wiring of power cabinets, control cabinets (automation), pneumatic cabinets and frames installation of cable trays on-site connection final inspection, power up and validation

Most of the consumption went to heat production, accounting for 61.8%. Pellet fuel consumption for heat production can be divided into three markets – residential heating (69%), commercial heating (19%) and heat produced by cogeneration (12%). The remaining 38.2% of wood pellets were used for electricity production. It should be noted that technologies for energy production from pellets for heat, electricity or both are mature, providing efficient and reliable processes. Wood pellets 6mm

Considering combined energy production systems are considered, only systems where heat and electricity production are made simultaneously are called cogeneration systems. In cogeneration systems; The heat energy, which is the side output of the electricity production system, is evaluated. As a result, since losses are greatly reduced, fuel consumption is significantly reduced and profitability based on energy efficiency emerges.

Manufacturing Process CNC Machining & Injection Molding PEEK performance Polyetheretherketone (PEEK) is a high-performance, engineering thermoplastic characterized by an unusual combination of properties. These properties range from high temperature performance to mechanical strength and excellent chemical resistance. Material Grade ARKPEEK-1000: 100%PEEK Produced from virgin polyetheretherketone resin and offers the highest toughness and impact resistance of all types. ARKPEEK-CF30: 30% Carbon Fiber + 70% PEEK Carbon fiber reinforcement lends the material a high level of rigidity and creep strength, high mechanical strength and heat conductivity values. ARKPEEK-GF30: 30% glass fiber + 70% PEEK Glass filled PEEK exhibits increased mechanical strength and high rigidity. ARKPEEK-MOD: 10% Carbon Fiber + 10% PTFE +10% Graphite high performance engineering plastic with product characteristics including excellent sliding and abrasion & wear resistance, high mechanical.

Manufacturing Process CNC Machining & Injection Molding PEEK performance Polyetheretherketone (PEEK) is a high-performance, engineering thermoplastic characterized by an unusual combination of properties. These properties range from high temperature performance to mechanical strength and excellent chemical resistance. Material Grade ARKPEEK-1000: 100%PEEK Produced from virgin polyetheretherketone resin and offers the highest toughness and impact resistance of all types. ARKPEEK-CF30: 30% Carbon Fiber + 70% PEEK Carbon fiber reinforcement lends the material a high level of rigidity and creep strength, high mechanical strength and heat conductivity values. ARKPEEK-GF30: 30% glass fiber + 70% PEEK Glass filled PEEK exhibits increased mechanical strength and high rigidity. ARKPEEK-MOD: 10% Carbon Fiber + 10% PTFE +10% Graphite high performance engineering plastic with product characteristics including excellent sliding and abrasion & wear resistance, high mechanical.

Ceramic PEEK Material Discover the art of precision engineering with Ceramic Filled PEEK Rods. Their exceptional machinability enables manufacturers to achieve intricate designs and complex shapes effortlessly. Combined with high strength and good stiffness, these rods ensure your components maintain their integrity, even under demanding conditions. Trust in Ceramic Filled PEEK Rods for reliable performance and seamless machining, elevating your projects to new levels of excellence.

PEEK E-motors Insulation In response to the evolving landscape of higher voltage platforms reaching up to 800V and the integration of advanced SiC and GaN switching technologies, the demands placed on e-motor insulation have never been more exacting. Introducing our latest innovation: ARKPEEK polymer grades. Specifically engineered to address the stringent requirements of extrusion wire manufacturing processes, these advanced polymers deliver an unparalleled combination of exceptional electrical properties, robust mechanical strength, high-temperature resilience, and chemical resistance.

Electric sewing machine for sacks model FPGK 350. This model is recommended for production up to 450 sacks per day. New model of the FPGK series designed for the seam of juta, paper, fabric, plastic and net bags. The front part of the stapler is made of metal while the handle is made of plastic. Given its features this electric sewing machine is suitable for farms, warehouses, post offices and food and chemical industries. It is a good solution for the closure of bags of any material and dimension due to the automatic feed. This light and handy machine is the fastest in its class. The standard model must be connected to the electric current of 220V. The maximum span passage is 10 mm. The material you can sew, if different from those listed must be low density (to avoid breaking of the needles).

The electromagnetically compatible design of a system, from first sketches through creating the circuit diagrams all the way to EMC-optimised routing on the circuit boards, allows the creation of a robust electrical product that will still function reliably even under difficult conditions. As specialists in ignition systems, we know the sources of electromagnetic disturbance and are world leaders in EMC processes.

The top labeling machine is the self adhesive labeling machine for pasting labels on top of the products, such as boxes, pouch, caps,lipsticks, or any flat surface of the products. This type of labeler is flexiable, and can bu customized fixing on the exited production line, and easy to move to other place. if change the labeling head direction, then it can be a side labeling machine.With touch screen control panel,make it easier and quicker to adjust various parameter,improve the labeling accuracy and working efficiengy. Label detection electric eye, product detection electric eye and optical fiber amplified adopts famous brands such as Germany SICK, Japan PANASONIC, Germany LEUZE (For transparent sticker) etc

Ohmic heating is a gentle, continuous process for heating of products, especially for products to keep their lumpiness, such as fruits, vegetables, spices, and other foodstuffs. Heating occurs via electricity, whereby the product functions as electrical resistor. Compared to the conventional cooking methods, the product is not heated over a hot surface, but, rather, uniformly over the entire cross-section. Using the hot-cold water systems is greatly beneficial, for generating energy efficiency as well as for enhancing process control with respect to the direct use of steam as heating medium. Especially in horizontal mixing systems, hot-cold water systems offer optimal conditions for realising the highest product quality and for preserving the lumpiness of the products. The automatic snap-closing manway is excellently suited to facilitate the frequent opening and closing processes. Owing to the heat and humidity, it is critical to add the additives in the cooking apparatuses through sta

The equipment offers the hydromassage function, through pneumatic control. Starting and stopping the electric pump is done by pressing the pneumatic button. Adjusting the air flow taken by the water jets is done by turning the regulator or regulators (two for larger tubs). Structure: 6 - 8 adjustable and adjustable water-air hydromassage jets (depending on the size and geometry of the bathtub) 700W electric pump – production in Italy or Spain Sorb Automatic column with siphon Metal support with adjustable legs and wall fixing brackets , anti-corrosive protection Manual control

The offer of electrical installation work forms the solid foundation of our company. It is connected with the own production of electrical switchboards. high current and low current installation by installing a lightning rod design activity Production of LV switchgear (without limitation by current value)

We offer a wide range of rods, which are used for electroplating, switchgear, ship building and power generating equipment, as they are high-conductivity. On the other hand, they are widely used as radiator in electrical product, as its high- thermal conduction. They are produced that copper fluid is casting to the billet moulds and follows to the extrusion press, after that annealed rods are drawn, to be copper rods, 2000 mm to 6000 mm length, 10 mm to 175 mm diameter and they are according with TSE 435, DIN EN 12163 and DIN EN 13601. General properties material with minimum copper content 99.95%

We offer a wide range of rods, which are used for electroplating, switchgear, ship building and power generating equipment, as they are high-conductivity. On the other hand, they are widely used as radiator in electrical product, as its high- thermal conduction. They are produced that copper fluid is casting to the billet moulds and follows to the extrusion press, after that annealed rods are drawn, to be copper rods, 2000 mm to 6000 mm length, 10 mm to 175 mm diameter and they are according with TSE 435, DIN EN 12163 and DIN EN 13601. General properties material with minimum copper content 99.95%

We offer a wide range of rods, which are used for electroplating, switchgear, ship building and power generating equipment, as they are high-conductivity. On the other hand, they are widely used as radiator in electrical product, as its high- thermal conduction. They are produced that copper upward casting and follows to the Continuous press, after rods are drawn, to be copper rods, 1000 mm to 6000 mm length, 10 mm to 90mm diameter and they are according with TSE 435, DIN EN 12163 and DIN EN 13601. General properties material with minimum copper content 99.95%

HODA, UAB produces plastic products for the electrical industry. Our company provides that services: mould tool manufacturing, plastic injection moulding, insert overmoulding, DC (dual- component) injection moulding, gas assisted injection moulding, thermoset moulding, plastic blow moulding, decoration, tampo printing, screen printing, wet painting, assembly and packaging, local and international delivery.

Extruded sections – plastic profiles, handles, and hoses manufactured by extrusion from various materials (PVC, PE, PP, ABS, and TPE) with different physical characteristics, in different shapes and colours, with different finalization (cutting, coating, printing, embossing, marking).

Product Name: electric rocking chair Article No.: bk2022040031 Material: environmental protection Property: baby products Outer box specification: 17*51*78cm Packing quantity: 1pcs

Hot Sale Two Seats four Wheels Remote Control Toy Electric Car For Children Product Name:Kids Electric Car Weight:39.5/37.5kg Style:Fashion Product Size:135*87*101cm Color:Red,Blue,White Packing Size:155*82*53cm Function:One Button To Start, Front And Back Swing,:2.4G R/C, Smartphone Control,:Power Indicator, Volume Control, :USB,SD,MP3

Electric horizontal machine, ultra compact for an optimized productivity! Suitable for the injection of many elastomers (rubber, silicones, etc.) Compact & ergonomic 33% smaller footprint compared to other presses on the market All features and production capacity in less than 4 meters length Productive & electric powered performance Productivity +20% 60% reduction in injection time 30% decrease in cure time Sustainable & Ecofriendly 50% power consumption 100% Water consumption 14% Waste reduction Oil free The “SmartWire” technology allows production to become autonomous and connected.

Ride-on car kids electric car for kids toy kids cars electric ride on 12v Age Range2 to 4 Years, 5 to 7 years Place of Origin:GD TypeCar StyleRide On Toy GenderUnisex Item No:BK212302001 Product nameKids Electric Car Function:Cool lights and music ColorBlue, red, white, orange Wheels:4 EVA Tyres Battery:12v4

Originating in Guangdong, China The email packaging is Applying Infants and Children Modern design style Brand BODISKIDS Model BK2023040037 Material metal Product name: Electric baby rocking chair Functional multifunctional baby chair Usage: Baby's sleep artifact Type: Children's swing chair Features: Safe and comfortable baby rocking chair

There are several popular 12V dc small electric actuators and 24V electric actuators in this product line. These include a light duty linear actuator or the DLA1 series 12V actuators. The others are heavy duty linear actuators such as the DLA2 series and DLA3 series 12V actuators. These are mini electric actuators.