Industrial washing machines - Import export

The machine is designed for cleaning and degreasing of machine parts and components. The components placed in the rotating basket, which can have a diameter of 800, 1000 or 1200 mm. By rotating of the basket the components are washed with washing solution. The machine can be with or without insulation, sensors for level-and temperature controls, mud sump or oil separator. The mud sump is welded to the machine’s corpus. The washing solution flows from the tank into the mud sump and catches the gross dirt. The purified solution flows from the mud sump in the tank. The oil separator designed for separation of the oil from the washing solution. The oil is separated as a surface layer, which is collected in a special bath and discharged out of the chamber. The skimmed fluid is returned to the tank. Machine corpus made entirely out of stainless steel, material No. 1.4301. The machine complies with the high CE-Requirements and EU- a

Maximum spin speed: 1400rpm Finish: Light grey 28 programmes including three custom programmes Anti-leakage system and child lock ECO cold and hot water connection – saves up to 70% of electrical consumption and 20% of the programme time Connection: 400V / 3ph / 16A / 50Hz / Max effect: 4.6kW Can be reconfigured to: 230V / 1ph / 13A / 50Hz / Max effect: 2.4kW Available with pump or valve drain system

Maximum spin speed: 1400rpm Finish: Touch Proof™ Stainless steel 28 programmes including three custom programmes Relay card for auto dosing with three signals Anti-leakage system and child lock ECO cold and hot water connection – saves up to 70% of electrical consumption and 20% of the programme time Connection: 230V / 1ph / 16A / 50Hz / Max effect: 3.2kW Can be reconfigured to: 230V / 1ph / 10A / 50Hz / Max effect: 2.2kW or 400V / 3ph / 10A / 50Hz / Max effect: 3.2kW Available with pump or valve drain system

"DOLFİN- VDL series Drum (Spiral) parts washing machines are used especially for cleaning small parts with high production quantities and produced in bulk. The materials poured from the inlet part of the spiralised drum in the device are directed towards the outlet part of the drum by the spirals inside the drum. While the drum moves on its own axis according to the set rotation speed, the parts are subjected to washing (degreasing), rinsing, passivation and drying processes respectively (depending on the model). Since these processes are sequential and continuous, all processes are completed quickly and effectively in a single device. Full penetration is achieved by pressurised spraying and immersion effects in each section. It is a very functional model used especially for washing bolts, nuts, washers, or small parts of this type, and fittings, nipples, couplings and fittings processed in high quantities on cnc and automat machines.

The part washing machine is designed to easily clean dirty parts with a small size and complex structure in the shortest time possible. Thanks to its brush, the person performing the washing process can carry out any kind of cleaning in the dirty part in detail. It is an ideal parts washing machine for using in small areas.

Industrial washing brushes are used across numerous industries including, glass manufacturing, packing machines, crate washing, tray washing, keg washing, food preparation machines, pallet washing, fruit washing and many more industries Our brushes are manufactured to suit each specific product in both robust products to delicate cleaning processes and our aim is to offer you the best brush for your product.

At Auromak Makine, with the knowledge and experience we have acquired since 2010, we continue to manufacture industrial cleaning machines and industrial parts washing machines that are aesthetic, high-quality, and practical for both retail and wholesale needs. We take pride in bringing innovation to the industry and adding value to our customers.

The machine is designed for quick, easy and effective cleaning of KLT crates and forms in the automotive industry. The device consists of the main washing zone followed by a rinsing zone and one blowing-off unit. The water from the washing and rinsing tanks are continuously filtered via two oil skimmers – one for each tank. Refreshing the water in the main tank with hot rinse water reduces the water and energy consumption. The filling of detergent in the washing tank is automatic via a dosing pump. Both main and rinsing tanks are equipped with filters for capturing the metal particles with size up to 100 μm. The machine is equipped with two 2.2 kW fans for vapour exhausting. The collected vapour from the fans passes through two condensers where it has been liquefied and returned into the main tank. There are four fans x 3 kW for removing residual rinsing water from the crates. The crates transportation speed is adjusted via a frequency controller.

The machine is designed for cleaning, degreasing, chemical treatment of the outer layer and blowing of small components. The parts are arranged in trays with dimensions 600x400x70-150 mm. Two washing zones – pre-washing zone and zone for main washing. After each washing zone there is zone for blowing. The pre-washing zone has an external band filter, which is with the possibility of processing a high volume of washing solution and captures particles of a size greater than 350 μm. The band filter cleaning the washing solution of oil and hard dirt. The mainly washing zone has a column bag filter, which captures particles of a size greater than 50 μm. Both filters have monitoring systems for the degree of soiling and in case of clogging the machine stops. Automatic dosing of the cleaning agent. Machine corpus made entirely out of stainless steel, material No. 1.4301. The machine complies with the high CE-Requirements and EU- and USDA regulations.

Spray washing: automatic cleaning For companies, manual cleaning of parts is a time-consuming activity. The Laborex spray washing machines ensure the automatic cleaning, rinsing, degreasing and drying of industrial parts made of metal or plastic. This way you can carry out other work without any worries while your parts are automatically cleaned. Test our rotating spray washing machines yourself We would like to invite you to come and test our rotating spray washing machines in our showroom. This is completely free and without obligation. Make your appointment now. Ideal solution for external cleaning of parts The Laborex rotating spray washing machines are the ideal solution for the external cleaning of parts. The spray washing principle is simple: you place the parts to be cleaned in the basket and select a washing program.

For companies, manual cleaning of parts is a time-consuming activity. The Laborex spray washing machines ensure the automatic cleaning, rinsing, degreasing and drying of industrial parts made of metal or plastic. This way you can carry out other work without any worries while your parts are automatically cleaned.

Our staff, who are specially trained and kept constantly up-to-date with the latest developments, produce special and automatic machines, production lines and industrial plants, automation and handling systems, prototypes and newly developed machines, material handling and automation systems, equipment and lines. The on-site engineering department at the Nole plant provides specialist consulting on the production of ad hoc industrial machines and systems, which are designed according to customer requirements using advanced 3D design software. Below are some examples of machinery produced : Equipment for the production of foam rubber Automatic cutting lines for rubber Industrial washing facilities Drying ovens Inspection machines Newspaper sorting plants Polymer tempering plants Rolling mills for pasta and kneading machines

Pair of socks for the washing machine - Mix colors and separate colors sets

For pressure ranges from 3,000 to 16,000 Pa. High-pressure fans The field of application of high-pressure fans extends over almost all branches of industry. Our high-pressure fans cover a pressure range from 3,000 to 16,000 Pa. Thanks to their simple and solid construction, these fans know how to convince. Whether they are used as a blower in an industrial washing machine or as a ventilation fan in a compost works, these machines perform every day.

Designed for washing the dyed textile samples with the same process as in the bulk production machines. Available with 3 chemical addition pumps and reserves. Automatic filling and draining and temperature gradient control helps the operator to create the cycle as per demand. The sample holder movement speed is adjustable and effects positively to optimize the wash effect. According to the design of the machine bleaching, desizing and Atmospheric dyeings can be made as well.

Dolfin RTS series Rotational basket washing machines, washing small and complex surfaces It is a compact parts washing machine used for precise and high-level cleaning of problematic part types. The parts that are placed in the washing basket one by one by positioning and / or in bulk are first sprayed with alkaline chemical washing liquid at high pressure to every point of the parts in the device. Then the washing cell is filled with this liquid and the parts are contacted with ultrasonic sound waves. Therefore, thin section detail points, internal holes and channels are cleaned at a high level. In the process, the basket is rotated on the vertical axis and both spraying and ultrasonic effect is penetrated to every point of the part. At the end of this process, the washing liquid is directed to its own tank, while the same process is applied for rinsing and/or liquids in the other tank.

DOLFİN- VDL series Drum (Spiral) parts washing machines are used especially for cleaning small parts with high production quantities and produced in bulk. The materials poured from the inlet part of the spiralised drum in the device are directed towards the outlet part of the drum by the spirals inside the drum. While the drum moves on its own axis according to the set rotation speed, the parts are subjected to washing (degreasing), rinsing, passivation and drying processes respectively (depending on the model). Since these processes are sequential and continuous, all processes are completed quickly and effectively in a single device. Full penetration is achieved by pressurised spraying and immersion effects in each section. It is a very functional model used especially for washing bolts, nuts, washers, or small parts of this type, and fittings, nipples, couplings and fittings processed in high quantities on cnc and automat machines.

DOLFİN- LYM1 series parts washing machines are industrial purpose parts cleaning devices used especially in repair and maintenance services before and after overhaul. While the parts placed in the device are rotated on its own axis by means of the washing basket, pressurised detergent hot water is sprayed. Thanks to the pressure, temperature and chemical effect, all oil and dirt on the parts are cleaned. Since Dolfin parts washing machines work in a closed cycle, new water and new detergent are not used each time. When washing repeatedly with the same tank, all pollution remains in the washing cell. Thanks to this feature, it protects both nature and labour. Thanks to its high efficiency and performance, it saves energy, water and labour. It works automatically in line with the temperature and time values set during use.

The D-FLEX wheels are manufactured through a new vacuum - dryer - high pressure process, entirely developed by DC, which results in the higher quality wheel in its range of products, and the only one to be covered by a lifetime warranty** against the de-bonding of the elastic Polyurethane tyre from the wheel centre, plus they grant a high cut and tear propagation resistance. Combines the load capacity and the resistance to wear and tear of the polyurethane with the ability to overcome obstacles and to reduce noise, vibrations and impacts of the elastic rubber. The Polyurethane tyre is mechanically bonded to the wheel core, and the coupling is further strengthened by a surface adhesion which is obtained without the use of any glue or chemical bonding. Recommended on trolleys for food industry and chemical industry, industrial trolleys, equipment and trolleys for meat and fish industry, slaughterhouses, pharmaceutical industry, floor-washing machines and scrubbers, and for traction.

Fully automated spray jet cleaning system with rotating ramps, upward-opening curtain and roll-out worktable. It may include several stages of cleaning: washing, rinsing, drying. All stages are performed in one chamber. The washer is designed for cleaning large parts weighing up to 1,5 ton starting from cooling mixtures, dust, shavings, composites, oil after stamping, conservation lubricants, polishing pastes, emulsions, oil products. The efficient cleaning of surfaces that helps to remove a wide variety of contaminants is carried out with an alkaline cleaning solution heated to a predetermined temperature.

Fully automated spray cleaning system equipped with upward-opening passage curtain. The unit is designed for cleaning large and heavy parts and assemblies. Parts are put on a movable bottom (trolley) and move inside the washing chamber. The part is processed by means of a gantry U-shaped ramp with multidirectional nozzles on all sides. The efficient cleaning of surfaces that helps to remove a wide variety of contaminants is carried out with an alkaline cleaning solution heated to a predetermined temperature.

DOLFİN-KBN1 series parts washing machines are used before and after overhaul in repair and maintenance services, especially for washing large and heavy parts. Apart from revision workshops, it is also used for cleaning the surfaces before assembly or packaging in enterprises and factories that produce parts in series. They are special devices designed for large sized and heavy parts such as engines and parts of construction machines, power plant turbines. While the parts placed in the device are rotated on its own axis by means of the washing basket, pressurised detergent hot water is sprayed. Thanks to the pressure, temperature and chemical effect, all oil and dirt on the parts are cleaned.

Dates Washing and Packing Line is characterized by a very high productivity of up to 3.5 tons per day. It works on different types and sizes of dates. Dates are subjected to vibration, washing and drying to be ready for packaging.

Dolfin KNV series conveyor belt washing machines are parts washing machines used for washing parts produced in series in large quantities. The parts placed at the entry point are moved towards the exit point of the device by means of the conveyor. The parts guided on the conveyor line are washed with high pressure, pre-washing, washing, rinsing, spraying with passivation liquids. At the end of the cleaning process, these parts are dried with pressurised hot air and discharged at the exit point. If desired, it can be integrated into production processes and robotic loading and unloading options are also available. While the entire device is fully automatic, all washing details are parametric. Cleaning is provided at any desired level by means of spray nozzles specially designed according to the part geometry.

This machine allows to wash, rinse and dry of mass production parts before assembly and packing. Genenarlly parts in the baskets that are moving on the conveyor are fallen into the machine by manual or pneumaticly. The door locked automatically and wash, rinse and dry operations are handled in the drum. Hot air or vacuum dry is appied. Optianally ultrasonic units can be attached to increase the washing quality. Thiss model is employing both spray and soak clening that improves the clenanliness at maximum level.

DOLFİN- KBN2 series parts washing machines are especially used for washing parts that require rinsing, passivation or other processes after washing, as well as large and heavy parts. While it is desired that there is no oil and other impurities on the surface before assembly or packaging in enterprises and factories that produce parts in series, it may also be necessary to remove the washing chemical used in the 1st stage from the surface of the part depending on the place of use of the part. For this requirement, a 2nd stage rinsing or a similar application is mandatory. Our KBN 2 series part washing devices are a special device containing more than 1 tank and/or bath. The parts placed in the device are rotated on its own axis by means of the washing basket, while pressurised detergent hot water is sprayed. Thanks to the pressure, temperature and chemical effect, all oil and dirt on the part is cleaned.